ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Inconel 625 Alloy TIP-TIG Hardfacing Coating: Process and Properties

Literature Overview and Industry Context

This study by Zhang Zhen and colleagues from Lanzhou University of Technology investigates the TIP-TIG (TT) welding process for applying Inconel 625 nickel-based alloy coatings on 316L stainless steel substrates. The research uses orthogonal experimental design to optimize welding current, travel speed, and wire feed speed, with weld dilution rate as the core evaluation criterion.

TIP-TIG is a modified TIG welding process that uses a special torch design to achieve higher deposition efficiency while maintaining the excellent quality of TIG welding. This process is particularly suitable for hardfacing applications where precise control of dilution and heat input is required. In my experience, TIP-TIG has become increasingly popular for hardfacing applications in the oil and gas, chemical processing, and power generation industries due to its ability to produce high-quality, low-dilution coatings.

Process Optimization and Parameter Selection

The orthogonal experimental design evaluates three key parameters: welding current, travel speed, and wire feed speed. The weld dilution rate is used as the core evaluation criterion because it directly affects the chemical composition and corrosion resistance of the coating layer.

Parameter Range Evaluated Optimal Value
Welding current (A) 120-180 150
Travel speed (mm/s) 1.5-2.5 2.0
Wire feed speed (m/min) 2.5-3.5 3.13

The optimal parameters are welding current of 150 A, travel speed of 2 mm/s, and wire feed speed of 3.13 m/min. These parameters achieve the desired dilution rate while maintaining a stable welding process and producing a smooth, uniform coating surface.

The dilution rate is critical because it determines the extent to which the substrate material is mixed into the coating layer. Excessive dilution can reduce the nickel and chromium content of the coating, compromising its corrosion resistance. The optimal parameters achieve a dilution rate that maintains the coating's intended chemical composition while ensuring good metallurgical bonding with the substrate.

Mechanical Properties of the Coating

The mechanical testing results show that the hardfacing coating significantly improves the tensile strength of the 316L substrate while slightly reducing ductility.

Material Tensile Strength (MPa) Elongation (%)
316L substrate 633.50 55.90
Hardfaced specimen 751.90 50.20

The increase in tensile strength is attributed to the presence of the Inconel 625 coating, which has higher strength than the 316L substrate. The slight reduction in elongation indicates that the coating is less ductile than the substrate, but the overall ductility remains excellent.

The hardness distribution across the welded joint shows the following pattern:

Location Hardness (HV)
Hardfacing coating 219.60
Heat-affected zone (HAZ) 155.10
Base metal (316L) 174.30

The hardness of the hardfacing coating is higher than both the base metal and the HAZ, which is expected for a nickel-based alloy coating. The lower hardness of the HAZ is attributed to the annealing effect of the welding thermal cycle, which can soften the substrate in this region.

Corrosion Resistance in Molten Chloride Salts

The corrosion testing in 600°C ternary chloride molten salt is particularly relevant for applications such as waste incineration, chemical processing, and molten salt energy storage systems. The results show a dramatic improvement in corrosion resistance for the hardfaced specimens.

Material Average Corrosion Rate (mm/a)
316L substrate 17.75
Hardfaced specimen 3.35

The hardfaced specimen exhibits a corrosion rate approximately 1/5 of the substrate, demonstrating the excellent corrosion resistance of the Inconel 625 coating in high-temperature chloride environments. The SEM and XRD analysis confirms that the coating forms a protective oxide layer that prevents further corrosion.

Practical Implications for High-Temperature Corrosion Applications

This research has direct implications for applications where components are exposed to high-temperature corrosive environments. The key takeaways are:

  1. TIP-TIG welding is an effective process for applying Inconel 625 coatings on 316L stainless steel substrates, providing excellent corrosion resistance and mechanical properties.
  2. The optimal process parameters (150 A, 2 mm/s, 3.13 m/min) achieve the desired dilution rate and produce a high-quality coating with uniform properties.
  3. The Inconel 625 coating provides excellent corrosion resistance in high-temperature chloride environments, reducing the corrosion rate by approximately 80% compared to the 316L substrate.
  4. The TIP-TIG process offers significant advantages over conventional TIG welding in terms of deposition efficiency while maintaining high quality.

Key Questions and Engineering Considerations

One of the critical questions that this research raises is the effect of the coating thickness on corrosion resistance. The study evaluates a single coating thickness, but in practice, the coating thickness must be determined based on the expected corrosion rate and service life requirements.

Another consideration is the effect of thermal cycling on the coating's performance. The corrosion testing is performed at a constant temperature, but in real applications, components may experience thermal cycling, which can affect the stability of the protective oxide layer and the integrity of the coating.

Study Insights and Recommendations

This research provides valuable guidance for the application of Inconel 625 coatings using TIP-TIG welding. My recommendations for practical implementation are:

  1. For high-temperature corrosion applications, Inconel 625 coatings applied by TIP-TIG welding provide excellent corrosion resistance and mechanical properties, making them suitable for waste incineration, chemical processing, and molten salt energy storage systems.
  2. The optimal process parameters should be determined through welding procedure qualification, using dilution rate as the core evaluation criterion.
  3. The coating thickness should be determined based on the expected corrosion rate and service life requirements, with a minimum thickness of 3-5 mm typically required for corrosion-resistant applications.
  4. Post-weld heat treatment may be necessary to relieve residual stresses and improve the mechanical properties of the coating, but the heat treatment parameters must be carefully controlled to avoid detrimental effects on the substrate.
  5. Quality control should include hardness testing, tensile testing, and corrosion testing to verify the performance of the coating.

The research demonstrates that TIP-TIG welding is a viable and effective process for applying Inconel 625 coatings on 316L stainless steel substrates, providing excellent corrosion resistance and mechanical properties for high-temperature applications. The optimal process parameters identified in this study provide a solid foundation for welding procedure qualification and manufacturing implementation.