ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Spherical Annular Sealing Band Hardfacing Process Analysis and Design of a Dual-Positioning Welding Machine

Background and the Challenge of Spherical Surfaces

The paper by He Wenping and colleagues from Henan University of Technology addresses a problem that I have encountered many times in the valve industry: how to hardface a spherical annular sealing band on a valve core. The BQ type double-eccentric hemisphere valve is a common design in mining and industrial applications, and its sealing surface is a spherical band that must be hardfaced with a wear-resistant alloy. The challenge is that the welding torch must follow a complex trajectory on a spherical surface while maintaining a constant welding speed and angle. If the torch angle or speed varies, the deposit thickness and quality will be inconsistent, leading to premature wear or leakage.

The authors analysed the welding trajectory and the movement speed of the weld pool on the spherical annular sealing band. They concluded that different workpiece sizes require different welding trajectories and speeds. To address this, they designed a dual-positioning mechanism that can adjust the posture of both the valve core and the welding torch, allowing for precise control of the welding path and speed.

Welding Trajectory and Speed Analysis

In a spherical annular sealing band, the welding trajectory is not a simple circle. It is a curve on a spherical surface, which means that the torch must move in three dimensions to maintain a constant distance from the surface and a constant angle to the tangent plane. The paper's analysis shows that the weld pool movement speed must be carefully controlled to achieve a uniform deposit thickness. If the speed is too fast, the deposit will be thin and may have lack of fusion. If the speed is too slow, the deposit will be thick and may cause excessive heat input, leading to distortion or cracking.

From my experience, the key parameters for this type of hardfacing are:

Parameter Typical Range Effect on Quality
Welding current 150-250 A Higher current increases penetration and dilution
Arc voltage 20-28 V Higher voltage widens the arc and increases heat input
Travel speed 2-6 mm/s Faster speed reduces deposit thickness
Wire feed speed 3-6 m/min Faster feed increases deposit thickness
Torch angle 90° to surface Maintaining perpendicularity is critical
Shielding gas flow 15-25 L/min Insufficient flow causes porosity

The paper emphasises that the welding speed must be adjusted based on the workpiece size. For larger diameter valves, the linear speed of the torch must be higher to maintain the same deposition rate per unit length. This is a practical point that is often overlooked in production. I have seen many cases where a welder uses the same speed for different valve sizes, resulting in inconsistent deposit thickness and quality.

Design of the Dual-Positioning Mechanism

The dual-positioning mechanism described in the paper is a clever solution to the problem of maintaining the correct torch posture on a spherical surface. The mechanism allows the valve core to be rotated and tilted independently of the torch, which means that the torch can always be positioned perpendicular to the surface at the point of welding. This is essential for achieving a uniform deposit.

From a practical standpoint, the design of such a mechanism must consider several factors:

  1. The range of motion required for different valve sizes.
  2. The rigidity of the mechanism to prevent vibration during welding.
  3. The ease of adjustment for different workpiece geometries.
  4. The compatibility with existing welding equipment.

The authors designed a mechanism that can adjust the valve core and torch posture to accommodate different welding trajectories and speeds. This is a significant improvement over fixed-position welding fixtures, which require manual adjustment for each valve size and often result in inconsistent quality.

Practical Implementation and Results

In my experience, the use of a dual-positioning mechanism can significantly improve the quality and efficiency of spherical sealing band hardfacing. I have seen similar systems in operation in valve manufacturing plants, and the results are impressive. The ability to maintain a constant torch angle and speed results in a uniform deposit thickness, which reduces the need for post-weld machining and improves the overall quality of the sealing surface.

However, there are some practical challenges in implementing such a system. The mechanism must be robust enough to withstand the heat and spatter from the welding process. The control system must be able to synchronise the movement of the valve core and the torch with the welding parameters. And the operator must be trained to set up the system correctly for each valve size.

The paper's contribution is in providing a systematic analysis of the welding trajectory and speed requirements, and in designing a mechanism that can meet those requirements. This is a valuable reference for any engineer involved in the design or operation of valve hardfacing equipment.

Conclusion and Lessons Learned

The hardfacing of spherical annular sealing bands is a challenging operation that requires precise control of the welding trajectory and speed. The paper by He Wenping and colleagues provides a thorough analysis of the problem and a practical solution in the form of a dual-positioning mechanism. From my perspective, the key lessons are:

  1. The welding speed and trajectory must be adjusted based on the workpiece size and geometry.
  2. Maintaining a constant torch angle and speed is essential for uniform deposit quality.
  3. A dual-positioning mechanism can greatly improve the quality and efficiency of the operation.
  4. The mechanism must be robust and easy to adjust for different valve sizes.

In the valve industry, we often focus on the material and the welding process, but we sometimes overlook the importance of the positioning equipment. This paper reminds us that the equipment is just as important as the process in achieving high-quality hardfacing. A well-designed positioning system can make the difference between a valve that lasts for years and one that fails after a few months of service. I would recommend this paper to any engineer involved in valve manufacturing or repair, as it provides both theoretical analysis and practical design guidance.