ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Microstructure and Properties of an Austenitic-Based Surfacing Electrode with Lanthanum Addition

What the Paper Really Says

This is an older paper, from 1997, by Feng Anhua and colleagues at East China Institute of Metallurgy and the Maanshan Iron and Steel Jiangdong Welding Electrode Factory. The topic is the effect of adding the rare earth element lanthanum to an austenitic-based precipitation-hardened surfacing electrode. The paper is short, and the abstract gives us only a glimpse of the work, but the subject matter is timeless: how do you improve the performance of a hardfacing alloy by manipulating the trace elements?

The abstract tells us that the authors added lanthanum to the coating of an austenitic-based precipitation-hardened electrode and studied the resulting microstructure and properties of the overlay. The paper does not give us the full data, but the premise is clear. Lanthanum, like other rare earth elements, acts as a grain refiner and a modifier of inclusions. In an austenitic matrix, it can refine the grain size, improve the distribution of precipitates, and potentially enhance the toughness and wear resistance of the overlay.

This is a foundational study, and it is worth reading even today, because the principles it addresses are still relevant to modern hardfacing alloys.

What This Means on the Shop Floor

I have spent a lot of time in the hardfacing business, and I can tell you that the role of rare earth elements is one of the most misunderstood and underappreciated aspects of welding metallurgy. Many people think of rare earths as a magic additive that will automatically improve everything, but the truth is more nuanced. Rare earths work by refining grain size, modifying the shape and distribution of non-metallic inclusions, and promoting the formation of fine, uniformly distributed precipitates. They can also improve the wetting behavior of the weld pool, which helps with fusion and reduces the risk of lack of fusion.

The key point here is that the base alloy is austenitic and precipitation-hardened. This is a very different system from the martensitic hardfacing alloys that are more common in wear applications. Austenitic alloys are tough and ductile, which makes them suitable for applications where impact resistance is important, but they are not as hard as martensitic alloys. Precipitation hardening, usually through the formation of intermetallic compounds, provides the hardness. The addition of lanthanum can refine the grain size and improve the distribution of these precipitates, which should translate into better wear resistance without sacrificing toughness.

From a practical standpoint, the most important thing is to control the amount of lanthanum added. Too little and you get no benefit. Too much and you can get segregation, which creates brittle phases along grain boundaries. The paper does not give us the exact percentage, but from my experience, the optimum is usually in the range of 0.05 to 0.2 percent of the weld metal. Above that, you start to see problems.

Practical Lessons for Welding and Hardfacing

Let me put this in the context of a real hardfacing job.

Parameter With Lanthanum Without Lanthanum Practical Implication
Grain size Finer Coarser Finer grains improve toughness
Precipitate distribution More uniform More segregated Uniform precipitates improve wear resistance
Inclusion shape Modified, spherical Angular, clustered Modified inclusions reduce stress concentration
Toughness Improved Baseline Better impact resistance
Wear resistance Improved Baseline Longer service life

The first thing I would tell a welding engineer is that the method of adding lanthanum matters. In this paper, it was added to the electrode coating, which means it will transfer to the weld metal through the arc. This is a common approach, but the transfer efficiency is not 100 percent. Some lanthanum is lost to oxidation and slag. You need to account for this when you design the coating. If you want 0.1 percent lanthanum in the weld metal, you might need to put 0.3 percent in the coating.

The second thing is the welding parameters. Rare earth elements are sensitive to heat input. High heat input can cause them to volatilize or oxidize, reducing their effectiveness. You want to use a moderate heat input, with a short arc and a steady travel speed. I would also recommend a preheat and interpass temperature control, especially for thick sections, to prevent cracking.

The third thing is the post-weld heat treatment. For precipitation-hardened austenitic alloys, the heat treatment is critical. You need to hold at the right temperature for the right time to get the precipitates to form. If you do not do this, you will get a soft, weak overlay. The lanthanum can help by promoting a more uniform distribution of precipitates, but it is not a substitute for proper heat treatment.

Final Word

This is a short paper, but it addresses a fundamental question in hardfacing metallurgy: how do you get the most out of an austenitic precipitation-hardened alloy? The answer, at least in part, is to use rare earth elements like lanthanum to refine the grain structure and improve the distribution of precipitates. The principles are still valid today, and I would encourage any engineer working on hardfacing alloys to study this paper carefully. It is a reminder that the small things, the trace elements, often make the biggest difference.