ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Powder-Added Cladding Process and Application of Wear-Resistant Composite Steel Plates

Core Technical Content and Process Principles

This paper introduces the powder-added cladding process, which is described as a high-efficiency, low-cost cladding technology. The composite steel plates produced by this process have good wear resistance and can be cut, formed, drilled, and welded. The paper explains the principles of powder-added cladding and describes applications of the wear-resistant composite steel plates.

This is an older paper from 1996, but the technology is still relevant. Powder-added cladding is essentially a variant of submerged arc cladding where alloy powder is added to the weld pool to modify the composition and properties of the cladding layer. This allows you to achieve high-alloy compositions without using expensive flux-cored wire. The cost savings can be significant, especially for high-alloy wear-resistant compositions.

Key Technical Parameters and Process Characteristics

Parameter Powder-Added Cladding Conventional SAW Cladding
Alloy addition method Powder fed into weld pool Alloy in flux-cored wire
Alloy content control Adjustable via powder feed rate Fixed by wire composition
Cost Lower for high-alloy compositions Higher for high-alloy compositions
Efficiency High High
Composite plate properties Good wear resistance, formable, weldable Similar, but less flexibility

The key advantage of powder-added cladding is flexibility. You can change the alloy composition by changing the powder feed rate or the powder composition, without changing the wire. This is particularly useful when you need different wear-resistant compositions for different applications. In conventional cladding, you would need to stock different wires for each composition.

The process also allows you to achieve higher alloy contents than is practical with flux-cored wire. With powder addition, you can add large amounts of alloying elements to the weld pool, creating a cladding layer with very high hardness and wear resistance. This is important for applications like mining and construction equipment that experience severe abrasive wear.

Engineering Practice Insights and Lessons Learned

I have used powder-added cladding for wear-resistant composite plates in applications like chute liners, hopper liners, and conveyor components. The process is cost-effective and produces plates with excellent wear resistance. The ability to cut, form, drill, and weld the composite plates is a significant advantage. It means you can fabricate the plates into the required shapes at your own facility, rather than having them pre-fabricated by the supplier.

One practical issue I have encountered is the uniformity of the powder addition. If the powder feed is not consistent, the alloy content will vary across the plate, leading to inconsistent wear resistance. The solution is to use a reliable powder feeder and to calibrate it regularly. I have also found that the powder particle size and flowability are critical. Fine powders can agglomerate and cause feed interruptions.

Another issue is the dilution from the base metal. In powder-added cladding, the first layer will have significant dilution from the substrate, which reduces the alloy content and hardness. This is less of a problem for composite plates because the cladding is typically thick enough that the first layer is a small fraction of the total. However, for thin cladding, dilution can be a concern.

The ability to weld the composite plates is important for fabrication. However, welding the cladding layer can be problematic because the high hardness makes it difficult to weld without cracking. The paper mentions that the plates can be welded, but in practice, I would recommend that welding be done on the base metal side, not through the cladding layer. If welding through the cladding is unavoidable, preheating and low-hydrogen consumables are essential.

Standards, Quality Control, and Delivery Implications

For wear-resistant composite plates, the acceptance criteria typically include hardness testing, cladding thickness measurement, and non-destructive testing for cracks and lack of fusion. The hardness test is usually done on the cladding surface, but I would recommend cross-section hardness testing to assess the through-thickness properties.

The cladding thickness is critical. If it is too thin, the plate will not have sufficient wear life. If it is too thick, the cost increases without a corresponding improvement in performance. The typical cladding thickness for wear-resistant composite plates is 3-10 mm, depending on the application.

For quality control, the critical checks are hardness, cladding thickness, and bond quality. The bond between the cladding and the base metal must be sound, with no lack of fusion or cracks. Ultrasonic testing is the standard method for verifying bond quality. I would also recommend a bend test on a sample to verify that the cladding does not spall or crack under deformation.

Study Insights and Recommendations

The paper's description of powder-added cladding as a high-efficiency, low-cost technology is accurate. In my experience, the cost savings can be significant, especially for high-alloy compositions. However, the process requires careful control of the powder feed rate and the welding parameters to ensure consistent quality.

My recommendation is to consider powder-added cladding for applications where you need high-alloy wear-resistant compositions and where the cost of flux-cored wire is prohibitive. The process is particularly well-suited for producing composite plates that will be fabricated into wear-resistant components.

I would also emphasize the importance of process qualification. Before using powder-added cladding in production, you should qualify the process with the specific powder and wire combination you intend to use. This includes verifying the alloy content, hardness, wear resistance, and bond quality. The qualification should be documented and used as the basis for production acceptance criteria.

The practical value of this paper is that it introduces a cost-effective cladding process that is often overlooked in favor of more expensive alternatives. Use it as a guide for evaluating powder-added cladding for your applications, but always validate with your own trials. That is how you turn a process description into a production capability.