Literature Study Note on Wide Strip Submerged Arc and Electroslag Surfacing Research
Overview of the Literature
This paper by Li Pengfei and Wang Jiantao from Xi'an Nuclear Equipment Co., Ltd., published in Electric Welding Machine (2010, Vol.40, No.2), presents research on wide strip submerged arc and electroslag surfacing using domestic strip and flux with Swedish ESAB welding equipment. The study measured intergranular corrosion, side bend, metallography, and hardness of the surfacing metal. The results showed that wide strip electroslag and submerged arc surfacing can produce surfacing metal with properties similar to 304L stainless steel. The paper also investigated the use of a magnetic control device to improve weld bead quality in strip submerged arc surfacing.
Core Technical Points and Interpretation
The Need for High-Efficiency Cladding
The paper's motivation was to improve the efficiency and quality of corrosion-resistant cladding. In the manufacture of nuclear equipment and other critical components, cladding is a time-consuming and costly process. The use of wide strip electrodes can increase the deposition rate and reduce the time required for cladding. However, wide strip surfacing presents unique challenges, including the need for precise control of the process parameters to achieve a uniform deposit.
Equipment and Consumables
The paper used Swedish ESAB welding equipment with domestic strip and flux. The use of domestic consumables with imported equipment is a common practice in the industry, and the paper's results demonstrate that this combination can produce high-quality cladding. The paper's focus on the compatibility of domestic consumables with imported equipment is valuable for anyone involved in the selection of welding consumables.
Test Results and Cladding Properties
The paper's test results showed that the wide strip electroslag and submerged arc surfacing processes produced cladding metal with properties similar to 304L stainless steel. The intergranular corrosion test results indicated that the cladding had good corrosion resistance. The side bend test results showed that the cladding had good ductility and bonding quality. The metallographic examination revealed a sound, uniform microstructure. The hardness measurements were within the expected range for 304L stainless steel.
Magnetic Control Device
The paper also investigated the use of a magnetic control device in strip submerged arc surfacing. The magnetic field can be used to control the shape of the weld bead and improve the quality of the deposit. The paper's results showed that the magnetic control device can improve the weld bead quality, reducing the risk of defects such as lack of fusion and undercut.
Engineering Practice and Lessons Learned
The Importance of Consumable Compatibility
The paper's use of domestic consumables with imported equipment highlights the importance of consumable compatibility. Not all consumables are compatible with all equipment, and the wrong combination can lead to poor weld quality. The paper's results demonstrate that domestic consumables can be used with imported equipment to produce high-quality cladding. However, the practical engineer must verify the compatibility of the consumables with the equipment before production begins.
Process Parameter Optimization
The paper's results underscore the importance of process parameter optimization. The deposition rate, dilution rate, and cladding quality are all affected by the process parameters. The practical engineer must carefully control the current, voltage, travel speed, and other parameters to achieve the desired results. The paper's use of a magnetic control device is an example of how process parameters can be optimized to improve quality.
Quality Assurance and Testing
The paper's comprehensive testing program is a model for quality assurance in cladding operations. The intergranular corrosion test, side bend test, metallographic examination, and hardness measurements are all essential for verifying the quality of the cladding. The practical engineer must ensure that the testing program is appropriate for the specific application and that the results are properly interpreted.
Key Questions and Reflections
Why Is 304L the Benchmark?
The paper used 304L stainless steel as the benchmark for the cladding properties. 304L is a low-carbon austenitic stainless steel that is widely used in corrosive service environments. Its low carbon content reduces the risk of sensitization and intergranular corrosion. The paper's results showed that the cladding metal had properties similar to 304L, which is a good indication of its suitability for corrosive service.
What Are the Limitations of Wide Strip Surfacing?
The paper does not extensively discuss the limitations of wide strip surfacing. One potential limitation is that the process is more sensitive to the condition of the base metal surface. Another limitation is that the process may not be suitable for all cladding materials. The practical engineer should consider the specific application when selecting a cladding process.
How Does This Compare to Modern Practices?
The paper was published in 2010, and the field of cladding technology has evolved significantly since then. Modern cladding processes, such as laser cladding and cold metal transfer, offer different advantages and disadvantages. However, the fundamental principles of cladding metallurgy remain the same. The paper's research on wide strip surfacing provides a solid foundation for understanding the capabilities and limitations of this process.
Study Insights and Implications
This paper reinforces the importance of selecting the right cladding process and consumables for the specific application. The paper's results demonstrate that wide strip electroslag and submerged arc surfacing can produce high-quality cladding with properties similar to 304L stainless steel. The use of a magnetic control device to improve weld bead quality is a valuable insight for anyone involved in strip submerged arc surfacing.
For the steel pipe and pipe fitting industry, the principles of cladding technology are directly applicable. Clad pipes and fittings are used in corrosive service environments, and the quality of the cladding is critical for their performance. The paper's research on wide strip surfacing provides valuable information for anyone involved in the manufacture of clad products.
Reference Value and Outlook
This paper is a valuable reference for anyone involved in cladding technology, particularly for wide strip surfacing. The comprehensive testing program and the investigation of the magnetic control device provide valuable insights into the capabilities and limitations of these processes. The paper's demonstration that domestic consumables can be used with imported equipment is a valuable contribution to the field.
Looking to the future, the demand for clad products will continue to grow as the industry moves towards more corrosive service environments. The development of new cladding processes will benefit from the systematic approach demonstrated in this paper. The lessons learned about process control and cladding quality will remain valuable. The paper is a reminder that the best cladding process is the one that produces a high-quality, corrosion-resistant cladding at the lowest cost.
Zhuojin Pipe Fitting Co., Ltd