ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Effect of Boron Carbide on Microstructure of Powder/Wire Composite Hardfacing High-Boron Iron-Based Alloys

Literature Overview and Context

This paper by Zhuang Minghui and colleagues from Harbin Institute of Technology and Jiamusi University, published in the Journal of Welding (2015, Vol. 36, No. 10), investigates the effect of boron carbide (B4C) on the microstructure and crack susceptibility of high-boron iron-based hardfacing alloys deposited using powder/wire composite hardfacing technology. The work is supported by the Heilongjiang Provincial Natural Science Foundation (ZD201008) and the Heilongjiang Provincial Department of Education (11531365). The study addresses a critical issue in hardfacing technology: how to control the formation of borides and carbides to achieve high hardness while minimizing the risk of cracking. The researchers used powder/wire composite hardfacing with different B4C contents in the alloy powder, and characterized the resulting deposits using microstructural analysis, micro-area composition analysis, microhardness testing, and macrohardness testing. The study is particularly relevant to applications where high hardness and wear resistance are required, such as mining equipment, agricultural implements, and pipe mill components.

Core Technical Findings and Interpretation

The study found that the high-boron iron-based hardfacing alloy consists of α-Fe, Fe2B, and Fe3(C,B) phases. As B4C is added, the primary island-like α-Fe disappears, and rhombic primary Fe2B and granular Fe3(C,B) phases precipitate. The fishbone-like and strip-like eutectic structures of α-Fe + Fe2B decrease in volume fraction and eventually disappear, and the chrysanthemum-like peritectic structure of α-Fe + Fe2B + Fe3(C,B) becomes the dominant microstructure. This is a significant finding because it shows that the boron-to-carbon ratio is a critical parameter that controls the microstructure of the deposit. The study also found that the boron and carbon content and their ratio are one of the factors affecting the crack susceptibility of the hardfacing alloy. The optimal composition was found to be approximately 30% alloy powder (containing 35% ferroboron powder and 5% B4C) combined with approximately 70% H08Mn2Si welding wire, which effectively suppresses cracking and achieves a stable hardness of 66 HRC.

Key Technical Parameters

Parameter Value / Observation
Welding method Powder/wire composite hardfacing
Alloy system Fe-B-C (high-boron iron-based)
Phases present α-Fe, Fe2B, Fe3(C,B)
B4C addition effect Primary α-Fe disappears; Fe2B and Fe3(C,B) form
Eutectic structure Fishbone/strip α-Fe+Fe2B disappears
Peritectic structure Chrysanthemum-like α-Fe+Fe2B+Fe3(C,B) dominates
Optimal composition 30% powder (35% Fe-B + 5% B4C) + 70% H08Mn2Si wire
Hardness achieved 66 HRC
Crack susceptibility Suppressed with optimal B/C ratio

Engineering Practice and Shop Floor Relevance

This study is directly relevant to the hardfacing of components that require extreme wear resistance, such as pipe mill guide plates, forming rolls, and slurry handling fittings. The finding that the boron-to-carbon ratio controls the microstructure and crack susceptibility is critical for practical applications. In my experience, high-boron hardfacing alloys are notoriously difficult to apply without cracking, and the crack susceptibility is often the limiting factor in their use. The study shows that by carefully controlling the B4C content in the alloy powder, it is possible to achieve a deposit that is both hard and crack-free. This is a significant practical finding. The use of powder/wire composite hardfacing technology is also noteworthy. This method allows for precise control of the alloy composition, which is essential for achieving the desired microstructure and properties. In conventional hardfacing, the composition is determined by the electrode or wire, and it is difficult to adjust the boron and carbon content independently. The powder/wire composite method provides this flexibility, which is a major advantage for applications where the composition must be tailored to specific service conditions.

Key Questions and Reflections

One question that this paper raises is the effect of the hardfacing layer on the toughness of the component. A hardness of 66 HRC is extremely high, and the deposit is likely to be brittle. In applications where impact loading is present, such as in mining equipment, this could be a significant concern. The paper does not report on impact toughness, so this remains an open question. Another concern is the effect of the hardfacing layer on the heat-affected zone of the base metal. The high heat input required for hardfacing can lead to grain growth and softening in the HAZ, which can reduce the fatigue strength of the component. The paper does not address this issue, but it is critical for the long-term performance of the component. I would also be interested in the effect of the hardfacing layer on corrosion resistance. High-boron alloys are typically not known for their corrosion resistance, and in applications where the component is exposed to corrosive media, this could be a limiting factor.

Study Insights and Implications for Practice

The practical takeaway from this study is that powder/wire composite hardfacing technology, combined with careful control of the B4C content, can produce high-boron iron-based hardfacing deposits that are both hard and crack-free. The optimal composition identified in the study—30% alloy powder (35% ferroboron + 5% B4C) with 70% H08Mn2Si wire—provides a good starting point, but I would recommend that any fabricator conduct their own trials to confirm the results for their specific application. The study also underscores the importance of understanding the relationship between alloy composition and microstructure. The fact that the boron-to-carbon ratio controls the formation of primary phases and eutectic structures is a fundamental metallurgical principle that must be considered when designing hardfacing consumables. In my experience, this is where many hardfacing applications go wrong. The consumable is selected based on hardness alone, without considering the microstructure or crack susceptibility, and the result is a deposit that fails prematurely.

Reference Value and Outlook

This study provides a valuable contribution to the understanding of high-boron iron-based hardfacing alloys and demonstrates the potential of powder/wire composite hardfacing technology. For the steel pipe and fitting industry, the findings are relevant to the hardfacing of wear-resistant components such as guide plates, forming rolls, and mandrel bars. The study also highlights the need for more research on the toughness and corrosion resistance of high-boron hardfacing alloys, as these properties are critical for many applications. As we continue to push the limits of hardfacing technology, understanding the fundamental metallurgy of these alloys becomes increasingly important, and this paper is a valuable contribution to that body of knowledge. The powder/wire composite hardfacing method is particularly promising, as it offers a level of compositional control that is not possible with conventional hardfacing consumables, and I expect to see more applications of this technology in the future.