ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Hydrocracking Reactor Overlay Disbonding and Cracking: A Critical Study Note

1. Literature Overview and Failure Context

The paper by Guo Jianhua from Sinopec Shanghai Petrochemical Co., Ltd. addresses a critical issue in the refining industry: the disbonding and cracking of the stainless steel overlay in a hydrocracking reactor. The hydrocracking reactor is a key piece of equipment in a refinery, operating at high temperature, high pressure, and in a hydrogen-rich environment. The reactor is typically made of a low-alloy steel (such as 2.25Cr-1Mo or 3Cr-1Mo) with a stainless steel overlay (such as 347 or 309L) to provide corrosion resistance.

The paper describes the formation of disbonding and cracking defects in the overlay after long-term service. These defects are a serious threat to the safe and stable operation of the reactor. The paper analyzes the causes of these defects and provides recommendations for maintaining the reactor and its system.

2. Mechanism of Overlay Disbonding

Overlay disbonding is a specific type of failure that occurs at the interface between the stainless steel overlay and the low-alloy steel base metal. The disbonding is not a crack in the overlay itself, but rather a separation of the overlay from the base metal along the fusion line.

The mechanism of disbonding is well understood. During the fabrication of the reactor, the overlay is deposited by welding. The welding process creates a heat-affected zone (HAZ) in the base metal. The HAZ is characterized by a high hardness and a high carbon content. The carbon in the HAZ can diffuse into the stainless steel overlay during the post-weld heat treatment (PWHT), forming a layer of chromium carbide at the interface. This carbide layer is brittle and has a low fracture toughness.

During service, the reactor is subjected to thermal cycling. The difference in the coefficient of thermal expansion between the stainless steel overlay and the low-alloy steel base metal creates a shear stress at the interface. This shear stress, combined with the brittle carbide layer, leads to the initiation and propagation of a crack along the interface. The crack can propagate over a large area, causing the overlay to disbond.

The paper identifies the presence of hydrogen as a contributing factor. In a hydrogen-rich environment, hydrogen can diffuse into the steel and accumulate at the interface. The hydrogen can cause embrittlement of the interface, making it more susceptible to disbonding.

3. Cracking of the Overlay and Its Consequences

In addition to disbonding, the overlay can also crack. The cracks can be either transverse or longitudinal. Transverse cracks are typically caused by thermal fatigue, while longitudinal cracks are typically caused by the combined effect of thermal stress and hydrogen embrittlement.

The cracking of the overlay has several consequences. First, the cracks can expose the base metal to the corrosive environment, leading to corrosion of the base metal. Second, the cracks can serve as initiation sites for more serious defects, such as hydrogen-induced cracking (HIC) or stress corrosion cracking (SCC). Third, the cracks can lead to the loss of the protective function of the overlay, which can result in the failure of the reactor.

The paper emphasizes the importance of regular inspection to detect these defects at an early stage. The inspection methods include ultrasonic testing (UT), eddy current testing (ET), and magnetic particle testing (MT). The inspection should be performed at regular intervals, and the results should be compared to the baseline data to detect any changes.

4. Inspection and Monitoring Strategies

The inspection of a hydrocracking reactor is a complex and challenging task. The reactor is a thick-wall vessel, and the overlay is only a few millimeters thick. The inspection must be able to detect disbonding and cracks in the overlay and at the interface.

Inspection Method Application Advantages Limitations
Ultrasonic Testing (UT) Detection of disbonding and cracks in the overlay. Can detect subsurface defects. Requires skilled operators and careful calibration.
Eddy Current Testing (ET) Detection of surface and near-surface cracks. Can be performed on the overlay surface. Limited penetration depth.
Magnetic Particle Testing (MT) Detection of surface cracks. Simple and effective for surface defects. Cannot detect subsurface defects.
Acoustic Emission Testing (AE) Monitoring of crack growth during operation. Can detect active defects. Requires the reactor to be in operation.

The paper recommends a combination of these methods to ensure comprehensive coverage. The inspection should be performed at regular intervals, and the results should be documented and compared to the baseline data.

5. Recommendations for Safe Operation and Maintenance

The paper provides several recommendations for maintaining the safe operation of the hydrocracking reactor. These recommendations are based on the analysis of the failure mechanisms and the experience of the refinery.

First, the reactor should be operated within the design limits. The operating temperature and pressure should not exceed the design values. The hydrogen partial pressure should be monitored and controlled.

Second, the reactor should be inspected at regular intervals. The inspection should include both external and internal inspection. The internal inspection should focus on the overlay and the interface.

Third, the reactor should be protected from thermal shocks. The startup and shutdown procedures should be carefully controlled to minimize thermal stress.

Fourth, the reactor should be monitored for hydrogen embrittlement. The hydrogen content in the steel should be measured, and the results should be used to assess the risk of disbonding.

Fifth, any defects that are detected should be evaluated and repaired if necessary. The repair should be performed by a qualified contractor using a proven procedure.

6. Key Lessons and Practical Insights

This paper is a valuable reference for anyone involved in the operation and maintenance of hydrocracking reactors. The key lessons are critical for the safe operation of these reactors.

First, the disbonding of the overlay is a serious and potentially catastrophic failure mode. It is not a cosmetic defect. It can lead to the loss of the protective function of the overlay and the eventual failure of the reactor.

Second, the mechanism of disbonding is well understood. It is caused by the formation of a brittle carbide layer at the interface and the shear stress from thermal cycling. The presence of hydrogen exacerbates the problem.

Third, regular inspection is essential. The inspection should be performed using a combination of methods to ensure comprehensive coverage. The results should be documented and compared to the baseline data.

Fourth, the reactor should be operated within the design limits. Any deviation from the design conditions can accelerate the degradation of the overlay.

Fifth, the repair of a hydrocracking reactor is a complex and high-risk operation. It should only be performed by a qualified contractor with extensive experience in this type of work.

In my experience, the hydrocracking reactor is one of the most critical pieces of equipment in a refinery. Its failure can have catastrophic consequences, both in terms of safety and production. The paper provides a solid framework for managing the risk of overlay disbonding and cracking. The lessons learned are applicable to any high-temperature, high-pressure, hydrogen-rich process equipment.