ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Application of Hardfacing Technology in Cutting Picks

Literature Overview

This paper, published in Mining Machinery in 2003, examines the application of hardfacing technology to cutting picks used in mining and construction equipment. The authors, Yao Shuyu from Shandong University of Science and Technology and Li Huiqi from Tai'an Keda Jina Plasma Technology Co., Ltd., describe how high-speed steel wear-resistant welding electrodes can be used to coat the base material of cutting picks. The key finding is that the coating forms a metallurgical bond with the substrate, and the resulting layer has high hardness and wear resistance.

The paper is short and practical, focusing on the feasibility and benefits of applying hardfacing to cutting picks. Cutting picks are used in roadheaders, continuous miners, and other excavation equipment. They suffer from severe abrasive wear during service, and hardfacing offers a way to extend their service life without replacing the entire pick.

Core Technical Points

Hardfacing Process

The paper describes using high-speed steel wear-resistant welding electrodes to deposit a hardfacing layer onto the cutting pick base material. The process involves:

  1. Preparing the pick surface by cleaning and possibly preheating.
  2. Depositing the hardfacing alloy using a welding process (likely manual arc welding or a similar method).
  3. Allowing the deposit to cool, forming a metallurgical bond with the substrate.

Metallurgical Bond

The critical technical point is that the coating forms a metallurgical bond with the base material. This is not a mechanical bond or an adhesive bond; it is a true metallurgical bond where the filler material fuses with the substrate, creating a continuous structure. This is essential for durability, as mechanical bonds can fail under impact and abrasion.

Hardness and Wear Resistance

The hardfacing layer has high hardness and wear resistance, which is the primary benefit of the technology. The high-speed steel composition provides excellent abrasive wear resistance, making it suitable for the demanding conditions of cutting picks in mining and construction.

Integration with Engineering Practice

Economic Justification for Hardfacing

In the mining and construction industry, cutting picks are consumable items that wear out quickly. The cost of replacing picks is not just the cost of the pick itself; it includes the labor and downtime associated with replacement. Hardfacing can extend the service life of picks, reducing the frequency of replacement and the associated costs.

Parameter Without Hardfacing With Hardfacing
Pick service life Baseline (e.g., 1 week) Extended (e.g., 3-4 weeks)
Replacement frequency High Low
Downtime cost High Low
Total cost per ton of material excavated Baseline Reduced

The economic benefit depends on the specific application, but in general, hardfacing can provide a significant return on investment by extending the life of cutting picks.

Process Considerations

For manufacturers of cutting picks, the hardfacing process must be carefully controlled to ensure quality. The key parameters are:

  1. Preheating: Preheating the pick before hardfacing can reduce the risk of cracking, especially for high-carbon or high-alloy base materials.
  2. Welding parameters: Current, voltage, and travel speed must be optimized to achieve proper fusion and avoid defects.
  3. Deposition thickness: The thickness of the hardfacing layer must be sufficient to provide wear resistance but not so thick that it becomes brittle or causes distortion.
  4. Cooling rate: Controlled cooling can reduce residual stress and prevent cracking.

Quality Control

Quality control for hardfaced cutting picks should include:

  1. Visual inspection: Check for cracks, porosity, and surface defects.
  2. Hardness testing: Verify that the hardfacing layer meets the required hardness specification.
  3. Metallographic examination: Confirm the metallurgical bond and the microstructure of the deposit.
  4. Field testing: Evaluate performance in actual service conditions.

Key Questions and Reflections

Why Is Metallurgical Bond So Important?

The metallurgical bond is the key to the success of hardfacing. A mechanical bond, such as a coating applied by thermal spray, can fail by spalling or delamination under impact. A metallurgical bond, where the filler material fuses with the substrate, creates a continuous structure that can withstand impact and abrasion. This is why welding-based hardfacing is preferred over other coating methods for demanding applications.

What Are the Limitations?

The paper does not discuss limitations, but in practice, there are several:

  1. Cracking: Hardfacing alloys with high hardness are often susceptible to cracking, especially if the base material is not preheated or if the cooling rate is too fast.
  2. Dilution: The base material can dilute the hardfacing alloy, reducing its hardness and wear resistance. This is particularly a concern for thin deposits.
  3. Distortion: The heat from welding can cause distortion of the pick, affecting its fit and function.
  4. Repair: Once the hardfacing layer is worn, it may be difficult to re-apply hardfacing due to the condition of the surface.

How Does This Compare to Other Wear-Resistance Methods?

There are several methods for improving the wear resistance of cutting picks:

Method Advantages Disadvantages
Hardfacing (welding) Metallurgical bond, high hardness, low cost Cracking risk, dilution, distortion
Thermal spray No distortion, thin coating possible Mechanical bond, spalling risk
Carbide inserts Very high hardness, excellent wear resistance High cost, brittle, difficult to attach
Surface hardening (heat treatment) No added material, no bond issues Limited hardness, not suitable for all materials

Hardfacing offers a good balance of cost, performance, and practicality for many applications.

Study Insights and Implications

Practical Value for Mining and Construction

This paper, while brief, highlights a practical technology that can provide significant value in mining and construction. The key insight is that hardfacing can extend the life of cutting picks, reducing downtime and costs. For manufacturers, this represents an opportunity to offer a value-added product. For end users, it represents a way to reduce operating costs.

The Importance of Process Control

The paper emphasizes the metallurgical bond and the hardness of the hardfacing layer, but the real key to success is process control. Without proper preheating, welding parameters, and cooling control, the hardfacing layer may crack or have poor bond quality. This is a lesson I have learned many times in the welding industry: the process is as important as the material.

Application to Other Components

While the paper focuses on cutting picks, the technology is applicable to a wide range of components that suffer from abrasive wear. In the pipe and fitting industry, hardfacing can be used on:

  1. Pipe bending dies: To extend the life of dies used in hot bending.
  2. Pipe cutting tools: To improve the wear resistance of cutting blades.
  3. Valve seats and gates: To provide wear resistance in abrasive service conditions.
  4. Pump impellers: To protect against erosion and cavitation.

Reference Value and Outlook

This paper is a useful reference for anyone considering hardfacing technology for wear-resistant applications. While it is brief, it provides a clear overview of the process and its benefits. The finding that the coating forms a metallurgical bond is the key technical point, and it is well-supported by the paper's description.

Looking forward, the technology could be further developed by exploring different hardfacing alloys, optimizing the process parameters, and developing automated hardfacing systems for mass production. The use of laser cladding, which offers better control and lower dilution, is a promising alternative to traditional welding-based hardfacing.

In my own practice, I would use this paper as a starting point for evaluating hardfacing applications. The key takeaway is that hardfacing can provide significant value in terms of extended service life, but the process must be carefully controlled to achieve the desired results. For cutting picks and similar components, hardfacing is a proven technology that can reduce costs and improve productivity.