ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Automatic Plasma Surfacing Tracking Control System for Triple Eccentric Butterfly Valve Discs

Literature Overview

This study by Li Heqi and colleagues at Lanzhou University of Technology addresses a specific but important manufacturing problem: the automatic plasma surfacing of triple eccentric butterfly valve discs. The triple eccentric butterfly valve is a critical component in pipelines, particularly in high-pressure and high-temperature applications, and the sealing surface of the disc must be hardfaced with a wear-resistant and corrosion-resistant alloy to ensure a long service life.

The challenge is that the triple eccentric butterfly valve disc has a complex, non-circular trajectory, which makes manual surfacing difficult and inconsistent. The authors designed a control system based on the 80C196KC microcontroller, which is a 16-bit microcontroller that was widely used in industrial control applications in the 2000s. The system includes data acquisition, trajectory analysis, and stepper motor control to achieve automatic plasma surfacing.

Technical Interpretation of the Control System

System Architecture

The control system is built around the 80C196KC microcontroller, which serves as the central processing unit. The system has three main components:

  1. Data acquisition: A VC++ program is used to collect the trajectory data of the butterfly valve disc. This data is then used to define the path that the plasma torch must follow.
  2. Trajectory analysis: The trajectory data is analyzed using MATLAB, which is used to design the filtering algorithms and the stepper motor reversal algorithms. The filtering is necessary to remove noise from the trajectory data, and the reversal algorithm is necessary to handle the direction changes in the trajectory.
  3. Stepper motor control: The stepper motors are controlled using a lookup table approach, which is a common technique for generating the pulse sequences required for smooth and accurate stepper motor motion. The acceleration and deceleration curves are designed based on the system response time.
System Component Function Implementation
Microcontroller Central processing unit 80C196KC
Data acquisition Collect trajectory data VC++ program
Trajectory analysis Filter and analyze trajectory MATLAB
Motor control Drive stepper motors Lookup table + acceleration/deceleration curves

The Lookup Table Approach

The use of a lookup table for stepper motor control is a practical and efficient method. Instead of calculating the pulse sequence in real time, the system stores a pre-computed table of pulse intervals that correspond to the desired acceleration and deceleration profiles. This reduces the computational load on the microcontroller and ensures that the motor motion is smooth and repeatable.

The acceleration and deceleration curves are critical for the quality of the surfacing. If the motor accelerates too quickly, the torch will move faster than the surfacing speed, resulting in a thin or discontinuous deposit. If the motor decelerates too slowly, the torch will dwell at the end of the trajectory, resulting in excessive heat input and potential distortion.

Engineering Practice Insights

The Importance of Trajectory Accuracy

In plasma surfacing, the trajectory accuracy directly affects the quality of the deposit. The plasma torch must follow the path of the butterfly valve disc with a high degree of accuracy to ensure a uniform deposit thickness and a consistent bead width. Any deviation in the trajectory will result in an uneven deposit, which can lead to premature wear or failure of the sealing surface.

The authors report that the control system is stable and reliable, with timely tracking. This is a significant improvement over manual surfacing, which is dependent on the skill and consistency of the welder. In a production environment, this translates to higher throughput, lower rejection rates, and more consistent quality.

Application to Steel Pipe Fitting Manufacturing

Triple eccentric butterfly valves are used in pipelines for oil, gas, and water, and they are often supplied as part of a piping package that includes steel pipe and pipe fittings. The ability to automatically surface the valve disc is a significant advantage for valve manufacturers, as it allows them to produce high-quality valves at a lower cost.

In my experience, the quality of the sealing surface is critical for the performance of a butterfly valve. A poorly surfaced sealing surface will leak, which can have serious consequences in a high-pressure pipeline. The automatic plasma surfacing system described in this study ensures that the sealing surface is uniform and consistent, which is essential for achieving a reliable seal.

The Role of Plasma Surfacing

Plasma surfacing is a preferred process for valve sealing surfaces because it offers several advantages over other surfacing processes:

  1. High deposition rate: Plasma surfacing can deposit material at a higher rate than TIG or laser surfacing, which improves productivity.
  2. Low dilution: The plasma arc can be controlled to achieve low dilution of the base metal into the surfacing layer, which preserves the properties of the surfacing alloy.
  3. Smooth surface: The plasma surfacing process produces a smooth, uniform deposit that requires minimal machining.
Process Deposition Rate Dilution Surface Quality
Plasma surfacing High Low Excellent
TIG surfacing Low Low Good
Laser surfacing Medium Very low Excellent
Manual arc surfacing Medium High Fair

Key Questions and Reflections

This study was published in 2006, and the control technology has evolved significantly since then. Modern control systems use programmable logic controllers, field-programmable gate arrays, or even industrial computers, which offer higher processing power and more flexibility. However, the fundamental principles of trajectory tracking and stepper motor control remain the same.

One question that this study does not address is the integration of the control system with the welding parameters. In a fully automatic system, the welding current, voltage, and travel speed must be coordinated to ensure consistent deposit quality. The control system in this study focuses on the trajectory, but the welding parameters are likely controlled separately. A more advanced system would integrate both aspects.

Study Insights and Implications

The key insight from this study is that automation of plasma surfacing for complex components such as triple eccentric butterfly valve discs is achievable with a well-designed control system. The use of a microcontroller, combined with data acquisition and trajectory analysis, provides a reliable and cost-effective solution.

For engineers in the steel pipe and fitting industry, this study is a reminder that automation is not just for high-volume production. Even for relatively low-volume, high-value components such as butterfly valve discs, automation can provide significant benefits in terms of quality, consistency, and productivity.

In conclusion, this study provides a practical solution to a specific manufacturing challenge. The control system is well-designed and tested, and it demonstrates that automatic plasma surfacing of complex components is a viable and beneficial approach.