ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Ultrasonic Detection Analysis of Overlay Disbonding in Hydrogenation Reactors: A Practical Review

Literature Overview

The 1998 paper by Li Xiaogang, Fu Dongmei, Meng Qinghai, and Ke Wei addresses a persistent problem in hydroprocessing service: disbonding of the austenitic stainless steel overlay cladding from the low-alloy steel base metal of hydrogenation reactor shells. The authors developed a practical computer-based analysis software for ultrasonic detection results, then applied it to field inspection data from an operating reactor. Their core finding is both simple and profound: the degree of disbonding increases because of an increase in the number of defects, not because individual defects grow. The largest defect, tracked over three years of service, did not increase in size.

Core Findings and Technical Interpretation

The disbonding mechanism in hydrogenation reactors is well understood by those of us who have lived with these vessels. Hydrogen diffuses into the low-alloy steel base during high-temperature, high-pressure service, and on shutdown or upset conditions, the dissolved hydrogen precipitates at the interface between the carbon steel and the stainless steel cladding. The resulting hydrogen pressure can lift the cladding off the base metal, creating planar defects that are notoriously difficult to detect with conventional ultrasonic techniques because the interface is metallurgically bonded but mechanically separated.

The authors' contribution is the systematic analysis of the defect population. Their software allowed them to map, size, and count disbonding indications across the entire vessel shell. The data shows that over three years, the maximum defect size remained stable, while the total number of defects increased. This has profound implications for inspection strategy. If we only track the largest indication, we miss the real degradation mechanism. The vessel is degrading through the initiation of new disbonded areas, not through the growth of existing ones.

Engineering Practice Insights

From my own experience with hydrogenation reactor inspection and repair, this finding aligns with what we see in the field. The disbonding is often driven by local factors: welding defects at the cladding interface, areas of high hydrogen flux, or regions where the cladding thickness is at the lower tolerance limit. These local initiation sites are distributed across the vessel, and each one can become a new disbonded area.

The practical consequence for inspection planning is significant. We must ensure our ultrasonic techniques are sensitive enough to detect small disbonded areas, not just large ones. The conventional approach of using a 20 mm or 25 mm diameter transducer with a fixed DAC curve may miss small indications that will grow into larger ones. The computer analysis approach described in this paper allows us to trend the total disbonded area and the defect count, which is a more reliable indicator of vessel condition than the maximum defect size alone.

Key Questions and Reflections

The paper raises a critical question: what is the acceptable threshold for disbonding? The API 510 and ASME PCC-2 codes provide some guidance, but they are conservative and often lead to unnecessary repairs. The authors' data suggests that a reactor with many small disbonded areas may be in worse condition than one with a few large ones, because the small areas are active initiation sites. This challenges the conventional wisdom that maximum defect size is the controlling parameter.

In my experience, the decision to repair or continue operation depends on the location of the disbonding, the operating conditions, and the remaining service life. Disbonding in the weld seam region or in areas of high stress concentration is more concerning than disbonding in the middle of a shell course. The computer analysis approach gives us the data to make these decisions with confidence.

Study Insights and Implications

This paper, though from 1998, remains relevant today. The problem of disbonding has not disappeared, and the inspection techniques have evolved but the fundamental physics remain the same. The key insight is that we must understand the defect population, not just individual defects. This requires a systematic approach to data collection and analysis, which is exactly what the authors developed.

For engineers involved in hydrogenation reactor inspection, the lesson is clear: do not rely on maximum defect size alone. Track the total disbonded area and the defect count. Use computer-based analysis to trend these parameters over time. And when making repair decisions, consider the location and distribution of disbonding, not just the size of the largest indication.

The paper also highlights the importance of developing inspection software that is practical and usable in the field. The authors' software was designed for real inspection data, not just laboratory specimens. This is a lesson for all of us who develop NDT techniques: the best tool is the one that works in the field, with the constraints of time, access, and data quality that we face every day.

Conclusion

This paper provides a valuable framework for understanding and managing disbonding in hydrogenation reactors. The finding that defect count, not defect size, drives the degradation process is a critical insight that should inform inspection strategy and repair decisions. For those of us who have spent decades in the refining and petrochemical industry, this is a reminder that the most important data is often not the largest indication, but the trend of the entire defect population. We must continue to develop and apply systematic analysis methods to ensure the safe and reliable operation of these critical vessels.