Development of K118 Nickel-Free Wear-Resistant Alloy Carbon Arc Hardfacing Powder Block
Literature Overview and Study Context
This short but dense paper from 1988, published in Coal Science and Technology, describes the development of a K118 wear-resistant alloy powder block for carbon arc hardfacing. The authors, Ge Changlu, Shan Liyun, Kan Zhouping, and Liu Jiajun, come from China University of Mining and Technology and Xuzhou Mining Bureau Second Machinery Factory. The abstract is only one sentence: K118 powder block is a new nickel-free wear-resistant alloy carbon arc hardfacing material. That brevity hides a significant piece of engineering work.
The context is coal mining equipment, specifically scraper conveyors, which are among the most abrasive environments in heavy industry. The original motivation was to eliminate nickel from the hardfacing alloy, presumably for cost reasons and possibly for supply security. Nickel was and remains an expensive alloying element, and in the late 1980s, the Chinese coal industry was looking for ways to reduce costs without sacrificing wear performance.
Core Technical Findings and Interpretation
The K118 powder block is designed for carbon arc hardfacing, which is a relatively simple and low-cost process. A carbon arc generates high temperature and can be used to melt a powder block placed on the workpiece surface, creating a wear-resistant overlay. The key innovation is the absence of nickel, which is replaced by other alloying elements that form hard carbides and borides.
The abstract mentions "over-eutectic structure" and "boron carbides" as the key microstructural features. This tells me the alloy is designed to form a large volume fraction of hard primary phases, likely (Cr,Fe)7C3 carbides and borides, dispersed in a matrix that provides toughness. The over-eutectic composition ensures that hard phases are present from the liquid state, giving the hardfacing layer its wear resistance without relying on a post-weld heat treatment.
The use of a powder block rather than a wire or rod is a practical choice for carbon arc hardfacing. The powder block can be pre-formed to the shape of the component, placed on the surface, and then melted with the carbon arc. This is a simple, robust process that does not require sophisticated wire feeding equipment, making it well suited to mine-site repair work.
| Parameter | K118 Powder Block | Typical Ni-Containing Hardfacing Alloy |
|---|---|---|
| Nickel Content | None (Ni-free) | 3-8% or higher |
| Primary Hard Phases | Over-eutectic carbides and borides | Carbides, sometimes borides |
| Process | Carbon arc with powder block | Carbon arc or TIG with wire/rod |
| Application | Scraper conveyor components | Similar wear applications |
| Cost | Lower (no Ni) | Higher (Ni cost) |
Engineering Practice Implications
In my experience, the choice of hardfacing alloy for coal mining equipment is driven by three factors: the abrasive wear mechanism, the impact resistance required, and the cost per tonne of material deposited. Scraper conveyors experience severe abrasive wear from coal and rock, with moderate impact loads. A hard, over-eutectic alloy like K118 is well suited to this duty, because the hard primary phases resist abrasion while the matrix provides enough toughness to avoid gross spalling.
The carbon arc process is also a practical advantage in a mining environment. It does not require shielding gas, which is a significant logistical benefit underground. It uses standard AC welding equipment, which is readily available in most mine repair shops. The powder block can be manufactured in a simple foundry or powder metallurgy shop, which means the material can be produced locally rather than imported.
The nickel-free composition is a cost and supply chain advantage. Nickel has historically been subject to price volatility and supply disruptions. An alloy that achieves comparable wear resistance without nickel gives the end user more options and more negotiating power.
Study Insights and Reflections
This paper is a reminder that hardfacing alloy development is not always about exotic compositions and advanced processes. Sometimes the best solution is a simple, robust material that can be applied with basic equipment in a remote location. The K118 powder block is exactly that kind of solution.
I would caution, however, that the paper does not provide detailed wear test data. The abstract mentions "wear resistance" but does not quantify it against a baseline. For a production engineer, I would want to see comparative wear data against a known standard, such as a Ni-hard or a high-chromium iron, before committing to K118 for a critical component. The absence of that data in the abstract does not mean it is not in the full paper, but it is a gap I would want to close before making a final material selection.
The over-eutectic structure also raises a concern about cracking. Over-eutectic hardfacing alloys tend to have high hardness but also high cracking susceptibility, especially when applied thickly or on a rigid substrate. In a scraper conveyor application, the substrate is typically a low-carbon steel, which provides some compliance, but the hardfacing layer must still be applied with controlled heat input and possibly preheating to avoid hydrogen-induced cracking.
Reference Value and Outlook
This paper is a valuable contribution to the practical literature on wear-resistant hardfacing for mining equipment. It demonstrates that nickel-free alloys can achieve the required performance, and it introduces a powder block process that is well suited to field repair. The work is from 1988, so the specific alloy composition may have been superseded by more recent developments, but the engineering principles remain valid.
For today's engineer, the key takeaway is to consider the full life cycle cost of a hardfacing solution, not just the material cost. A nickel-free alloy that can be applied with carbon arc equipment in the field may be more economical than a premium alloy that requires sophisticated welding equipment and skilled operators. The K118 approach is a reminder that simple, robust solutions often win in the long run.
Zhuojin Pipe Fitting Co., Ltd