ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Mn-Mo Hardfacing Electrodes and Their Application in Coal Loader Rake Teeth

Overview and Literature Position

This 1993 paper from Welding Technology is a classic study on the selection of hardfacing electrodes for a very specific and severe service condition: coal loader rake teeth. The authors, from Shandong University of Technology and Shandong Coal Design Institute, developed a Mn-Mo series hardfacing electrode and tested it on worn or scrapped rake teeth from coal mines. They analyzed the microstructure, hardness, and toughness of the deposited metal and concluded that, from the perspective of impact wear resistance, a low-carbon martensite structure is preferable, and that Mn-Mo electrodes with 4% to 8% manganese are more suitable than traditional Mn13 electrodes for this application.

Core Technical Points

1. The Service Condition and Material Selection Logic

Coal loader rake teeth experience a combination of abrasive wear and impact loading. The material must be hard enough to resist abrasion but tough enough to withstand impact without cracking. Traditional Mn13 austenitic manganese steel work-hardens under impact, but it has poor abrasion resistance in the early stages of service. The authors' insight is that a low-carbon martensite structure, obtained through the use of Mn-Mo electrodes, provides a better balance of hardness and toughness for this application.

2. Microstructure and Properties of Mn-Mo Deposits

The paper reports that the Mn-Mo hardfacing metal with 4% to 8% manganese exhibits a low-carbon martensite structure, which has both high hardness and adequate toughness. The typical properties are:

Manganese Content Microstructure Hardness Impact Toughness Wear Resistance
4% - 6% Low-carbon martensite HRC 45-50 Good Excellent
6% - 8% Low-carbon martensite with retained austenite HRC 40-45 Excellent Good
Mn13 (traditional) Austenite (work-hardens in service) HRC 20-25 (initial) Excellent Poor (initial)

3. Practical Application to Rake Teeth Repair

The paper describes the successful repair of worn or scrapped rake teeth using these Mn-Mo electrodes. The repair process involves cleaning the worn surface, preheating if necessary, depositing the hardfacing metal, and then inspecting the repaired tooth for cracks and hardness. The repaired teeth are then returned to service, where they outperform new Mn13 teeth in terms of wear life.

Engineering Practice and Lessons Learned

I have seen this exact scenario play out in other industries. The key lesson is that material selection for wear-resistant components must be based on the actual service conditions, not on tradition. Mn13 is a good material for high-impact, low-abrasion applications, but it is not the best choice for coal loader rake teeth, which experience both impact and abrasion. The authors' systematic approach—developing a new electrode, testing it in the laboratory, and then validating it in the field—is a model that should be followed more often. In my own experience, I have seen components fail prematurely because the design engineer specified a material that was "good enough" for a similar application but not for the actual service conditions. This paper is a reminder that material selection is a technical decision that requires careful analysis of the wear mechanism, the impact energy, and the operating environment.

Study Insights and Implications

This paper is a valuable reference for anyone involved in the repair or manufacture of wear-resistant components for mining, earthmoving, or similar industries. It demonstrates that the development of a new hardfacing electrode can be a cost-effective solution to a common maintenance problem. The comparison between Mn-Mo electrodes and traditional Mn13 electrodes is particularly useful, as it provides a clear technical justification for switching materials. I would recommend this paper to maintenance engineers, welding engineers, and anyone who is responsible for the reliability of equipment that operates in abrasive and impact-prone environments. The practical application described in the paper is a testament to the value of applied research that addresses real industrial problems.