ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Electromagnetic Force Distribution in Electroslag Strip Cladding of Flat Workpieces: Numerical Simulation of Undercutting

Literature Overview and Technical Context

The paper by Li Peilin and colleagues from Shanghai Jiao Tong University addresses a specific and persistent problem in electroslag strip cladding: undercutting at the weld toes. The authors established an electromagnetic field model for a flat workpiece and used numerical simulation to analyze the electromagnetic force distribution. They found that the electromagnetic field in the workpiece is related to the position of the cladding electrode. Compared with a weld bead in the center of the base metal, when the weld bead is at the edge of the base metal, the magnetic field and electromagnetic contraction force undergo a sudden change, and the ratio of the electromagnetic contraction force on the left and right elements of the weld toe reaches 2.1 times. They also simulated non-uniform electrode voltage distribution and double-sided grounding of the workpiece, finding that both lead to difficult cladding formation.

This is a physics-based study that explains a common defect. Electroslag strip cladding is widely used for surfacing large vessels, such as pressure vessels and reactor vessels, because it offers high deposition rates and low dilution. However, undercutting at the weld toe is a frequent problem, and this paper shows that the root cause is electromagnetic force.

Key Technical Points and Process Windows

Let me explain the physics and its practical implications:

Factor Effect on Electromagnetic Force Practical Consequence
Weld bead at center of workpiece Symmetrical force distribution Uniform bead shape, minimal undercut
Weld bead at edge of workpiece Asymmetrical force, ratio up to 2.1x Strong contraction force on one side, causing undercut
Non-uniform electrode voltage Uneven current distribution Uneven melting, poor bead formation
Double-sided grounding Altered current path Distorted magnetic field, difficult formation

The electromagnetic contraction force is a result of the interaction between the welding current and the magnetic field it generates. In a flat workpiece, the current flows from the electrode to the workpiece and then to the ground connection. The magnetic field around the current path creates a force that tends to pinch or contract the molten pool. When the weld bead is at the edge of the workpiece, the current path is asymmetric, and the magnetic field is distorted. This creates a strong contraction force on one side of the weld toe, pulling the molten metal away and causing undercut.

Integration with Engineering Practice and Lessons Learned

This paper explains a defect that I have seen many times in the shop. When we clad a large vessel, we typically start at the center and work outward. The beads near the edge of the vessel are the ones that give trouble—undercutting, poor fusion, and irregular bead shape. The paper's finding that the electromagnetic force ratio reaches 2.1x at the edge explains why.

The practical solutions are clear. First, adjust the grounding arrangement. If the workpiece is grounded on both sides, the current path is more symmetric, but the paper shows that double-sided grounding can also cause problems. The key is to design the grounding to ensure a symmetric current path. Second, control the electrode position. If you can keep the electrode away from the edge of the workpiece, you reduce the asymmetry. In practice, this means planning the cladding sequence so that the edge beads are deposited last, or using a different technique for the edge beads. Third, consider using a wider strip electrode or a different welding process for the edge regions.

Another practical point: the paper mentions that non-uniform electrode voltage distribution causes poor formation. This is a real issue in production. If the strip electrode is not properly aligned or if the contact tips are worn, the current distribution becomes uneven, and the bead shape suffers. Regular maintenance of the cladding head is essential.

From my experience, I would add that undercutting in electroslag strip cladding is not just a cosmetic issue. Undercut creates a stress concentration that can lead to cracking in service, especially in pressure vessels. It also reduces the effective thickness of the cladding, which can compromise corrosion resistance. The paper's numerical model provides a scientific basis for understanding and controlling this defect.

Concluding Reflections

This paper is a valuable contribution to the understanding of electroslag strip cladding. The numerical simulation of electromagnetic forces explains the root cause of undercutting and provides a basis for process optimization. For the shop floor, the key takeaways are: pay attention to the grounding arrangement, control the electrode position relative to the workpiece edge, and maintain the cladding head to ensure uniform current distribution. I would recommend this paper to anyone involved in strip cladding of large vessels, and I would use the findings to develop a more robust cladding procedure that minimizes undercut and ensures consistent quality.