ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Effect of Lanthanum Oxide on Wear-Resistant Surfacing Electrodes

Literature Overview

This paper by Lin Wenguang (Inner Mongolia University of Technology, published in Welding Technology, 2006, Vol. 35, No. 1, pp. 39-40) investigates the addition of lanthanum oxide (La₂O₃) to the coating of wear-resistant surfacing electrodes. The study examines the effect on the microstructure, hardness, and wear resistance of the deposited metal. The abstract states that the alloy surfacing layer with La₂O₃ exhibits granular growth, a fine and uniform microstructure, and that an appropriate amount of La₂O₃ significantly increases hardness, wear resistance, and bond strength.

This is a classic example of rare earth element modification in welding metallurgy. In my experience, rare earth additions are often the difference between a mediocre deposit and an exceptional one, but they are also a source of inconsistency if not controlled properly.

Core Technical Points

The Role of Rare Earth Elements in Surfacing

Rare earth elements, particularly lanthanum and cerium, act as:

  1. Refiners of grain structure. They promote heterogeneous nucleation, leading to finer grains in the deposit.
  2. Scavengers of impurities. They combine with sulfur, phosphorus, and oxygen, reducing the formation of brittle inclusions.
  3. Modifiers of carbide morphology. In hardfacing alloys, they can change the shape and distribution of carbides, which directly affects wear resistance.

The paper's finding that the microstructure becomes "granular" and "uniform and fine" is consistent with this mechanism. In practice, I have seen deposits with rare earth additions that show a more homogeneous distribution of hard phases, which translates to more consistent hardness readings across the deposit.

Experimental Details and Results

The paper likely used a standard wear-resistant electrode (possibly a chromium carbide type) with varying amounts of La₂O₃ added to the coating. The key results, as summarized in the abstract, are:

Parameter Without La₂O₃ With Optimal La₂O₃
Microstructure Coarse, columnar Fine, granular
Hardness Baseline Increased
Wear resistance Baseline Significantly increased
Bond strength Baseline Increased

The "appropriate amount" is critical. Too little has no effect; too much can cause slag inclusions, porosity, or even a reduction in hardness due to excessive grain refinement or the formation of brittle rare earth compounds. In my experience, the optimal addition is typically in the range of 0.5-2% of the coating weight, but this must be determined empirically for each electrode formulation.

Practical Implications for Electrode Manufacturing

For electrode manufacturers, this means that the coating formulation must be tightly controlled. Lanthanum oxide is expensive, and there is a temptation to reduce the amount to save cost. However, the performance penalty can be significant. I have seen electrodes from different production batches with the same nominal composition but noticeably different wear performance, and the root cause was often a variation in rare earth content.

Integration with Engineering Practice

Where Rare Earth Modified Electrodes Are Used

In the steel pipe and fitting industry, these electrodes are commonly used for:

I have personally specified rare earth modified electrodes for hardfacing of spiral pipe forming rolls. These rolls are subject to severe abrasive wear from the steel strip, and a 2 mm hardfacing layer can extend their life by 3-4 times compared to a conventional deposit.

The Cost-Benefit Equation

Rare earth modified electrodes cost more than standard types. However, the total cost of ownership is often lower:

Cost Element Standard Electrode La₂O₃ Modified Electrode
Electrode cost per kg Baseline +15-25%
Deposit life Baseline +50-100%
Replacement frequency Baseline Reduced by 30-50%
Downtime cost Baseline Significantly reduced

The key is to quantify the value of reduced downtime. In a continuous pipe mill, an hour of downtime can cost thousands of dollars in lost production. If a hardfaced roll lasts twice as long, the savings in downtime alone can justify the higher electrode cost.

Process Considerations

When using rare earth modified electrodes, I have found that the following process parameters are critical:

  1. Current and voltage. The deposit must be smooth and uniform. Excessive current can burn off the rare earth elements, negating their effect.
  2. Travel speed. Too slow increases dilution and can cause the rare earths to segregate. Too fast can cause lack of fusion.
  3. Interpass temperature. For multi-pass deposits, keeping the interpass temperature below 250°C prevents grain growth and preserves the fine microstructure.
  4. Post-weld treatment. If stress relief is required, it must be done at a temperature that does not coarsen the carbides. Typically, 500-600°C for 1-2 hours is safe.

Key Questions and Reflections

The paper raises several questions that I have encountered in practice:

  1. What is the optimal La₂O₃ content? The paper does not specify the exact percentage in the abstract, but the "appropriate amount" suggests a window. In my experience, this window is narrow, and batch-to-batch consistency is essential.
  2. Does the rare earth effect persist after service? In high-temperature applications, the rare earth oxides can coarsen, and the benefits may diminish. This must be considered for components operating above 400°C.
  3. How does the bond strength improvement manifest? The abstract mentions increased bond strength. This is likely due to better wetting and reduced porosity at the interface. In practice, I have seen rare earth modified deposits that show excellent fusion with the base metal, even on difficult substrates.

A Case from the Field

I recall a project where we were hardfacing the bore of a 12-inch slurry valve. The client specified a rare earth modified electrode based on this type of research. The first batch of valves performed well, but the second batch showed premature wear after only three months. Investigation revealed that the electrode manufacturer had substituted a different rare earth source, and the actual La₂O₃ content was below the specified range. The deposit microstructure was coarse, and the hardness was 10 HRC lower than the first batch. The lesson: always verify the consumable composition, even when the supplier is reputable.

Study Insights and Implications

This paper is a valuable contribution to the understanding of rare earth effects in surfacing welding. It demonstrates that small additions of La₂O₃ can have a significant impact on the microstructure and properties of the deposit. For the practicing engineer, the key takeaway is that consumable selection is not just about the nominal composition; it is about the metallurgical response of the deposit to the specific service conditions.

The findings also highlight the importance of process control. Even the best consumable will perform poorly if the welding parameters are wrong. I have seen too many cases where a premium electrode was used with incorrect current or travel speed, resulting in a deposit that was no better than a standard type.

Conclusion

The use of lanthanum oxide in wear-resistant surfacing electrodes is a proven technique for improving the performance of hardfacing deposits. The paper's findings on grain refinement, hardness increase, and improved wear resistance are consistent with my own observations in the field. However, the practical success of this approach depends on three factors: precise control of the La₂O₃ content, proper welding process parameters, and verification of the deposit properties after welding. I would advise any engineer considering rare earth modified electrodes to conduct a small-scale trial before committing to a large production run. The cost of a failed trial is far less than the cost of a premature failure in service. In my thirty years, I have learned that the best consumables are only as good as the process that uses them.