AP1000 Steam Generator Tube Sheet Surfacing: Cold Crack Analysis and Mitigation
Literature Overview and Context
This paper by Zheng Zhangli et al. from State Nuclear Power Engineering Company addresses a critical problem in nuclear power plant construction: cold cracking in the tube sheet surfacing of AP1000 steam generators. The tube sheet is a massive forging that requires a thick corrosion-resistant surfacing layer on the primary side. Cold cracking during or after surfacing is a serious quality issue that can delay the project and compromise the integrity of the component.
The paper is published in a Chinese nuclear power engineering journal. The authors analyze the root causes of cold cracking from four perspectives: base metal welding characteristics, hydrogen effects, welding process, and residual stress. They then propose improvements in forging procurement, welding control, and surfacing process.
Root Cause Analysis
Base Metal Welding Characteristics
The tube sheet is typically made of a low-alloy steel forging, such as SA-508 Gr.3 Cl.1 or similar. This material has a high carbon equivalent, which increases its susceptibility to cold cracking. The welding characteristics include:
- High hardenability — the HAZ can form martensite on cooling.
- High carbon equivalent — CE > 0.40% indicates high crack susceptibility.
- Low ductility at low temperatures — the HAZ is brittle.
Hydrogen Effects
Hydrogen is the primary cause of cold cracking. The sources of hydrogen include:
- Moisture in the flux or shielding gas.
- Contaminants on the base metal surface.
- Hydrogen in the filler wire or electrode.
Hydrogen diffuses into the HAZ and accumulates at stress concentrations. When the local hydrogen concentration exceeds a critical value, cracking initiates. The cracking is typically delayed — it occurs hours or days after welding, which makes it difficult to detect.
Welding Process
The surfacing process for the tube sheet is typically a strip cladding process using a submerged arc welding (SAW) or electroslag welding (ESW) method. The process parameters affect the cooling rate and the hydrogen content:
- High heat input reduces the cooling rate, which is beneficial.
- Low heat input increases the cooling rate, which promotes martensite formation.
- Inadequate preheat and interpass temperature control increases the risk.
Residual Stress
The surfacing process creates a tensile stress field in the deposited layer and the HAZ. When combined with hydrogen and a susceptible microstructure, the residual stress can trigger cold cracking. The stress is highest at the edges of the clad layer and at the interface between the clad and the base metal.
Proposed Improvements
Forging Procurement
| Improvement | Rationale |
|---|---|
| Specify lower carbon equivalent | Reduces hardenability and crack susceptibility |
| Require vacuum degassing | Reduces hydrogen content in the forging |
| Specify grain size control | Refines the grain, improves toughness |
| Require ultrasonic testing | Detects internal defects before machining |
Welding Control
| Improvement | Rationale |
|---|---|
| Strict preheat control | Prevents martensite formation in the HAZ |
| Interpass temperature monitoring | Ensures consistent cooling rate |
| Post-weld heat treatment (PWHT) | Relieves residual stress, tempers martensite |
| Hydrogen bake-out | Removes hydrogen from the weld before PWHT |
| Controlled cooling after welding | Prevents rapid cooling that promotes cracking |
Surfacing Process
| Improvement | Rationale |
|---|---|
| Use low-hydrogen consumables | Reduces hydrogen input |
| Optimize heat input | Balances cooling rate and deposition rate |
| Use multiple layers | Reduces the stress in each layer |
| Control layer thickness | Prevents excessive buildup and stress |
Engineering Practice Implications
Application to Nuclear Power Plant Construction
This paper is directly relevant to the AP1000 steam generator fabrication. The tube sheet is one of the most critical components in the steam generator, and cold cracking during surfacing is a serious quality issue. The proposed improvements are practical and can be implemented in a fabrication shop.
Lessons for Other Applications
The lessons from this paper apply to any thick-section low-alloy steel component that requires surfacing. The combination of high carbon equivalent, hydrogen, and residual stress is a recipe for cold cracking. The countermeasures — preheat, PWHT, low-hydrogen consumables, and controlled cooling — are standard practice in the industry, but they must be rigorously implemented.
Quality Control
For a critical component like a tube sheet, the quality control must include:
- Pre-weld inspection — verify the forging quality, surface condition, and preheat temperature.
- In-process monitoring — record the interpass temperature, heat input, and welding parameters.
- Post-weld inspection — perform NDT (UT, PT, RT) after a delay of at least 24 hours to allow hydrogen-induced cracking to develop.
- PWHT verification — confirm the heat treatment parameters and the resulting hardness and toughness.
Study Insights and Reflections
This paper is a good example of root cause analysis applied to a real manufacturing problem. The authors correctly identify the four contributing factors: base metal characteristics, hydrogen, welding process, and residual stress. The proposed improvements address each factor in a systematic way.
The key lesson is that cold cracking is a multi-factor problem. It is not enough to simply reduce the hydrogen content or increase the preheat temperature — all factors must be addressed together. A welding procedure that works in the laboratory may fail in production if the base metal is different or the hydrogen content is higher.
For the shop floor, the practical takeaway is to treat cold cracking as a process control issue, not a metallurgical mystery. The control points are well known: preheat, interpass temperature, hydrogen control, and PWHT. If these are rigorously controlled, cold cracking can be prevented.
Zhuojin Pipe Fitting Co., Ltd