ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

ESAB Strip Cladding Technology and Its Applications

Literature Overview and Core Research Content

The 2013 paper from ESAB, published in Electric Welding Machine, provides an overview of strip cladding technology and its applications. The paper is not a research paper but a technical review of the technology, covering both submerged arc strip cladding and electroslag strip cladding. The paper discusses the advantages of strip cladding, including high deposition rate and low dilution rate, and the applications of the technology, including pressure vessels, heat exchanger tube sheets, hydraulic turbine blades, mining equipment, and construction machinery.

The paper is a valuable resource for anyone involved in strip cladding. It provides a clear overview of the technology and its applications, and it highlights the key process parameters that must be controlled to achieve a high-quality cladding layer.

The paper's main point is that strip cladding is a highly efficient process that can be used to deposit a corrosion-resistant or wear-resistant layer on a wide range of components. The process is particularly well-suited for applications where a low dilution rate is required, such as in the cladding of pressure vessels and heat exchanger tube sheets.

Technical Points and Process Interpretation

Strip cladding is a welding process that uses a flat strip electrode instead of a round wire. The strip electrode is typically 30 to 60 mm wide and 0.5 to 1.0 mm thick. The process can be performed using either submerged arc welding or electroslag welding.

In submerged arc strip cladding, the arc is struck between the strip electrode and the workpiece, and the arc is submerged in a layer of flux. The flux provides protection from the atmosphere and helps to shape the weld bead. The process has a high deposition rate and a low dilution rate, which makes it suitable for cladding large areas.

In electroslag strip cladding, the heat is generated by the resistance of the molten slag, not by an arc. The strip electrode is fed into the molten slag pool, and the slag melts the strip and the workpiece surface. The process has an even higher deposition rate than submerged arc strip cladding and an even lower dilution rate. However, the process is more sensitive to the process parameters and requires a more careful setup.

The paper highlights the importance of controlling the dilution rate in strip cladding. The dilution rate is the ratio of the base metal melted into the cladding layer to the total volume of the cladding layer. A low dilution rate is important because it ensures that the cladding layer maintains its corrosion resistance or wear resistance. The dilution rate is influenced by the welding current, the travel speed, the arc length, and the strip width.

The paper also discusses the applications of strip cladding. In pressure vessels, strip cladding is used to deposit a corrosion-resistant layer on the internal surface of the vessel. The layer is typically a nickel-based alloy, such as Inconel 625, or a stainless steel, such as 316L. The cladding layer provides corrosion resistance and prevents the base metal from coming into contact with the corrosive medium.

In heat exchanger tube sheets, strip cladding is used to deposit a corrosion-resistant layer on the tube sheet surface. The cladding layer provides corrosion resistance and ensures a good seal between the tube and the tube sheet.

In hydraulic turbine blades, strip cladding is used to deposit a wear-resistant layer on the blade surface. The cladding layer provides wear resistance and prevents erosion of the blade.

Integration with Engineering Practice and Shop Floor Experience

In my experience, strip cladding is a highly efficient process for depositing a corrosion-resistant or wear-resistant layer on a wide range of components. The process is well-suited for large components, such as pressure vessels and heat exchanger tube sheets, where a large area must be cladded.

The paper's discussion of the two process variants, submerged arc strip cladding and electroslag strip cladding, is important. The choice of process depends on the specific application. Submerged arc strip cladding is more versatile and easier to control, while electroslag strip cladding has a higher deposition rate and a lower dilution rate but is more sensitive to the process parameters.

In my experience, electroslag strip cladding is preferred for applications where a low dilution rate is critical, such as in the cladding of pressure vessels for corrosive service. However, the process requires a more careful setup and a more skilled operator.

The paper also highlights the importance of the flux in strip cladding. The flux plays a critical role in the process, providing protection from the atmosphere, shaping the weld bead, and influencing the composition of the cladding layer. The choice of flux is important, and it must be matched to the strip electrode and the base metal.

Key Questions and Reflections

One question that this paper raises is the economic justification for strip cladding. The process is more efficient than other cladding processes, such as gas tungsten arc welding or plasma arc welding, but it requires specialized equipment and a skilled operator. The economic justification depends on the volume of work and the cost of the equipment.

Another question is the quality of the cladding layer. The paper does not provide detailed information on the quality of the cladding layer, such as the mechanical properties or the corrosion resistance. This is important for the practical application of the process.

The paper also raises the question of the repair of the cladding layer. If the cladding layer has a defect, such as a lack of fusion or a crack, it must be repaired. The repair process is complex and requires a skilled welder.

The paper's focus on the applications of strip cladding is appropriate, but it does not address the limitations of the process. For example, strip cladding is not suitable for small components or for components with complex geometries. The process is best suited for large, flat or gently curved surfaces.

Study Insights and Implications

This paper is a valuable resource for anyone involved in strip cladding. It provides a clear overview of the technology and its applications, and it highlights the key process parameters that must be controlled to achieve a high-quality cladding layer.

The paper also highlights the importance of choosing the right process for the application. Submerged arc strip cladding and electroslag strip cladding have different advantages and disadvantages, and the choice depends on the specific application.

The paper's discussion of the applications of strip cladding is particularly useful. It provides a clear understanding of where the process can be used and what the benefits are.

Reference Value and Outlook

This paper has significant reference value for engineers and researchers involved in strip cladding. It provides a clear overview of the technology and its applications, and it highlights the key process parameters that must be controlled.

In the future, I expect to see more applications of strip cladding as the technology continues to develop. The process is highly efficient and can be used to deposit a wide range of alloys, including nickel-based alloys, stainless steels, and wear-resistant alloys.

The paper is a reminder that strip cladding is a mature technology that has been used for many years. However, the technology continues to evolve, and new developments, such as the use of advanced control systems and new flux formulations, are expanding the applications of the process.