Effect of Surfacing Layer Chemical Composition on 9CrMoV Steel Deposited Metal Properties
Background and Why This Study Matters
The 9CrMoV steel is a martensitic stainless steel used extensively in the power generation industry for turbine rotors and other high-temperature components. The material offers excellent creep resistance and oxidation resistance at elevated temperatures, making it suitable for ultra-supercritical steam conditions.
However, the repair of damaged components, particularly the rotor journal, presents a significant challenge. The journal is a critical surface that must withstand wear, corrosion, and fatigue. When the journal is damaged, it must be repaired by surfacing, which requires the deposition of a material that is compatible with the 9CrMoV base metal.
The authors of this study used a 1CrMo surfacing material to repair the journal of a 9CrMoV steel rotor. The key question was how the chemical composition of the surfacing layer, which is affected by the dilution from the base metal, influences the mechanical properties and microstructure of the deposited metal.
The Application Context and Key Technical Points
The ultra-supercritical turbine rotor journal is a critical component that operates at high temperatures and under significant mechanical stress. The journal surface must have high hardness for wear resistance, good toughness to resist fatigue, and adequate corrosion resistance to withstand the steam environment.
The surfacing process used in this study was submerged arc welding (SAW) with a 1CrMo filler material. The choice of 1CrMo is interesting because it provides a good balance of hardness and toughness. However, the composition of the deposited metal is not the same as the filler material. The base metal, 9CrMoV, has a higher chromium and molybdenum content, and the dilution from the base metal changes the composition of the deposited metal.
The authors analyzed the chemical composition of different surfacing layers and studied the effect of the composition on the mechanical properties and microstructure. The key finding was that the dilution rate decreases as the distance from the base metal increases. This means that the first layer has the highest dilution, and the subsequent layers have progressively lower dilution.
Key Findings on Dilution and Properties
The study showed that the dilution rate is a critical factor in determining the properties of the surfacing layer. The first layer, which has the highest dilution, has a composition that is closer to the base metal. This results in higher hardness but lower toughness.
The following table summarizes the effect of dilution on the properties:
| Layer | Dilution Rate | Alloy Content | Hardness | Toughness |
|---|---|---|---|---|
| First Layer | High | Higher (closer to base metal) | Higher | Lower |
| Second Layer | Moderate | Moderate | Moderate | Moderate |
| Third Layer | Low | Lower (closer to filler metal) | Lower | Higher |
The authors found that as the distance from the base metal increases, the dilution decreases, and the alloy content in the deposited metal decreases. This results in better plasticity and toughness. The interface between the base metal and the surfacing layer showed good bonding, with no evidence of separation.
This is a critical finding because it means that the properties of the surfacing layer are not uniform. The first layer has different properties than the subsequent layers. This must be taken into account when designing the surfacing procedure.
Practical Recommendations and Critical Questions
For the repair of turbine rotor journals, the practical implication is that the surfacing procedure must be designed to achieve the desired properties in the final layer. The first layer, which has high dilution, may not have the optimal properties. However, the subsequent layers, which have lower dilution, can provide the desired combination of hardness and toughness.
The authors optimized the surfacing parameters to achieve a good balance of properties. The key was to control the dilution rate by adjusting the welding parameters, such as the current, voltage, and welding speed.
One of the critical questions that this study raises is the effect of the dilution on the long-term performance of the surfacing layer. The first layer, which has high dilution, may have a different microstructure and different creep properties than the subsequent layers. This could affect the performance of the component in service.
Another question is the effect of post-weld heat treatment. The turbine rotor journal is typically subjected to a post-weld heat treatment to relieve residual stress and to temper the martensite. The effect of this heat treatment on the properties of the surfacing layer needs to be understood.
I would also question the choice of the 1CrMo filler material. The 9CrMoV base metal has a higher chromium content, which provides better oxidation resistance. The 1CrMo filler material has a lower chromium content, which may reduce the oxidation resistance of the surfacing layer. This needs to be considered for high-temperature applications.
Study Insights and Implications for Practice
This study provides valuable data on the effect of dilution on the properties of the surfacing layer. The key insight is that the dilution rate is a critical factor that must be controlled to achieve the desired properties.
For the shop floor, this means that the surfacing procedure must be carefully designed to account for the dilution. The first layer, which has high dilution, may not have the optimal properties. However, the subsequent layers can provide the desired combination of hardness and toughness.
The study also demonstrates the importance of chemical composition analysis in the qualification of surfacing procedures. The composition of the deposited metal is not the same as the filler material, and the difference is due to the dilution from the base metal.
Zhuojin Pipe Fitting Co., Ltd