ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

High-Temperature Low-Plasticity Crack Sensitivity of 52M Alloy Surfacing Layers Prepared by Different Processes

Literature Overview and Context

This paper from Shanghai University of Engineering Science addresses a problem that is critical in the nuclear power and petrochemical industries: the cracking of nickel-based alloy surfacing layers during welding and post-weld heat treatment. The authors used 52M alloy welding wire to deposit surfacing layers on S304 stainless steel using both laser surfacing and TIG surfacing. They studied the microstructure, phase composition, and high-temperature low-plasticity crack sensitivity of the two types of surfacing layers. This is a sophisticated study that goes beyond simple mechanical testing to understand the fundamental mechanisms of cracking.

Core Technical Findings

Microstructure and Phase Composition

Both types of surfacing layers have a single-phase austenitic microstructure. However, the laser-surfaced layer has finer grains and a more regular morphology than the TIG-surfaced layer. This is a significant finding, because grain size has a direct effect on crack sensitivity.

Parameter Laser Surfacing TIG Surfacing
Microstructure Single-phase austenite Single-phase austenite
Grain size Finer Coarser
Grain morphology More regular Less regular
Cr23C6 precipitates Fewer More

Cr23C6 Precipitation

Both types of surfacing layers contain Cr23C6 precipitates, but the laser-surfaced layer has fewer precipitates. This is important because Cr23C6 precipitation at grain boundaries is a major cause of sensitisation and intergranular cracking in austenitic alloys.

High-Temperature Low-Plasticity Crack Sensitivity

The high-temperature low-plasticity crack sensitivity is lower for the laser-surfaced layer. At the same temperature and strain, the laser-surfaced layer has fewer cracks than the TIG-surfaced layer. However, as the strain increases, the number of cracks in the laser-surfaced layer increases more rapidly. This suggests that the laser-surfaced layer has a lower crack initiation threshold but a higher crack growth rate.

Strain Level Laser Surfacing Crack Count TIG Surfacing Crack Count
Low Fewer More
Medium Moderate More
High Increases rapidly Increases

Practical Engineering Insights

The Laser vs TIG Trade-Off

The comparison between laser and TIG surfacing is instructive. The laser process produces a finer grain size and fewer precipitates, which reduces crack sensitivity. However, the laser process is more expensive and requires more sophisticated equipment. The TIG process is simpler and more widely available, but it produces a coarser grain size and more precipitates, which increases crack sensitivity.

The Importance of Grain Size

The grain size is a critical factor in crack sensitivity. Fine grains are more resistant to crack initiation because they have a higher yield strength and a more uniform distribution of strain. The laser process produces finer grains because of the rapid cooling rate, which limits grain growth.

Cr23C6 Precipitation and Sensitisation

The Cr23C6 precipitation is a major concern for austenitic alloys. When Cr23C6 precipitates at grain boundaries, it depletes the chromium in the adjacent matrix, making the material susceptible to intergranular corrosion and cracking. The laser process produces fewer precipitates, which reduces the risk of sensitisation.

Key Questions and Reflections

The paper raises a question that I have asked many times: what is the practical significance of high-temperature low-plasticity cracking? This type of cracking occurs during welding and post-weld heat treatment, when the material is at elevated temperature and under strain. It is a major concern for nickel-based alloys, which are used in critical applications such as nuclear power plant components and petrochemical equipment.

Study Insights and Implications

The most important insight for me is that the process selection has a direct effect on crack sensitivity. The laser process produces a finer grain size and fewer precipitates, which reduces crack sensitivity. However, the laser process is more expensive and requires more sophisticated equipment. For critical applications, the additional cost of laser surfacing may be justified by the improved reliability.

The Strain Rate Effect

The finding that the crack count in the laser-surfaced layer increases more rapidly with strain is interesting. This suggests that the laser-surfaced layer has a lower crack initiation threshold but a higher crack growth rate. This could be a concern if the component is subjected to high strain during service.

Reference Value and Outlook

This paper is a valuable reference for anyone involved in surfacing of austenitic alloys, particularly for critical applications. It provides a detailed comparison of laser and TIG surfacing, and it gives insight into the fundamental mechanisms of high-temperature low-plasticity cracking. For my own practice, I would use this as a starting point for selecting the appropriate surfacing process for specific applications. The next step would be to study the effect of process parameters on the crack sensitivity, and to develop a process window that gives the optimal combination of grain size and precipitate distribution.

Summary

This paper provides a detailed comparison of laser and TIG surfacing of 52M alloy on S304 stainless steel. The key findings are that the laser-surfaced layer has a finer grain size, fewer Cr23C6 precipitates, and lower high-temperature low-plasticity crack sensitivity than the TIG-surfaced layer. However, the crack count in the laser-surfaced layer increases more rapidly with strain, suggesting a lower crack initiation threshold but a higher crack growth rate. For the practising engineer, this paper provides valuable guidance on process selection for critical applications. The laser process offers improved crack resistance but at a higher cost, and the decision must be based on the specific application and the required reliability. The study also highlights the importance of understanding the fundamental mechanisms of cracking, not just the mechanical properties.