ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Quantitative Evaluation of Stainless Steel Surfacing Layer Disbonding Resistance

The Disbonding Problem in Hydrogen Service

This paper addresses one of the most serious problems in the fabrication of hydrogenation reactors: the disbonding of the stainless steel surfacing layer from the low-alloy steel base metal. Disbonding occurs when hydrogen accumulates at the interface between the cladding and the base metal during service, and the resulting pressure causes the cladding to separate.

The authors propose a quantitative parameter, the cracking hydrogen concentration C_dc, to evaluate the resistance of a surfacing layer to disbonding. This is a significant contribution because it provides a numerical value that can be used to compare different materials and processes.

The C_dc Parameter and Its Determination

The C_dc parameter is defined as the hydrogen concentration at which cracking or disbonding occurs. The authors determined C_dc for a batch of surfacing test blocks under different test conditions, and they found that the value was essentially constant for the same batch of material.

Test Condition C_dc Value Interpretation
Condition A Constant value C_dc is a material property, not a test condition property
Condition B Constant value Confirms the consistency of the parameter
Condition C Constant value C_dc is independent of the test method

This is a very important finding. It means that C_dc can be used as a material property to characterize the disbonding resistance of a surfacing layer, similar to how a tensile strength or a fracture toughness is used.

Relationship to In-Service Performance

The authors also showed that the C_dc value can be related to the disbonding behavior of the surfacing layer in an in-service reactor. This is the key practical value of the parameter. If you know the C_dc value for a particular surfacing material and process, you can predict whether the layer will disbond under the hydrogen concentration expected in service.

Engineering Practice Considerations

In my experience, disbonding is a real problem in hydrogenation reactors, and it is often discovered during shutdown inspections when ultrasonic testing reveals a lack of bond between the cladding and the base metal. The C_dc parameter provides a quantitative tool for evaluating the risk of disbonding, which is much better than the qualitative assessments we often rely on.

The practical application of this parameter is in material selection and process qualification. When you are qualifying a surfacing process for a hydrogen service application, you should determine the C_dc value and compare it with the expected hydrogen concentration in service. If the C_dc value is higher than the expected hydrogen concentration, the risk of disbonding is low.

Summary and Practical Takeaways

This paper presents a valuable quantitative parameter for evaluating the disbonding resistance of stainless steel surfacing layers. The C_dc parameter is a material property that is independent of the test conditions, and it can be related to the in-service performance of the layer. This provides a rational basis for material selection and process qualification in hydrogen service applications. I would recommend that this parameter be included in the qualification requirements for any surfacing layer that will be exposed to hydrogen in service. It is a significant step forward from the qualitative assessments that have been used in the past.