ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Carbide Precipitation Effects on Mechanical Properties of Dissimilar Steel Welds with ENiCrFe-3 Pre-Edge Cladding — A Crystal Plasticity Simulation Study

The Dissimilar Steel Welding Problem

Welding dissimilar steels is one of the most challenging problems in fabrication. When two different steels are welded together, the elements in the two materials can diffuse across the weld interface, creating a transition zone with different properties. This can lead to cracking, embrittlement, and premature failure.

A common example is the welding of low-alloy steel to austenitic stainless steel. The low-alloy steel has a body-centered cubic structure, while the stainless steel has a face-centered cubic structure. The difference in crystal structure and composition creates a complex metallurgical situation at the weld interface.

One approach to solving this problem is to use a transition layer. The idea is to deposit a layer of a compatible filler metal on one of the base materials, creating a graded transition from one material to the other. The paper uses this approach, depositing an ENiCrFe-3 transition layer on the low-alloy steel before welding to the stainless steel.

Pre-Edge Cladding with ENiCrFe-3

ENiCrFe-3 is a nickel-based filler metal that is commonly used for welding dissimilar steel joints. It has a high nickel content, which gives it good compatibility with both low-alloy steel and stainless steel. The nickel-based filler metal has a coefficient of thermal expansion that is intermediate between the two base materials, which reduces the thermal stress at the interface.

The pre-edge cladding process involves depositing the ENiCrFe-3 layer on the edge of the low-alloy steel component. This layer acts as a buffer, preventing the direct diffusion of elements between the low-alloy steel and the stainless steel. The layer also provides a transition in properties, reducing the stress concentration at the interface.

The paper reports that the pre-edge cladding approach achieved good welding of the dissimilar steel joint. However, carbide precipitation was observed in the weld joint.

Carbide Precipitation: Where and Why

Carbide precipitation is a common problem in nickel-based filler metals and in the heat-affected zone of the base material. The carbides can form at grain boundaries, depleting the surrounding material of chromium and reducing its corrosion resistance. The carbides can also act as stress concentrators, promoting crack initiation.

In the ENiCrFe-3 weld, the carbides are likely to be chromium carbides or nickel-based carbides. The precipitation occurs during the welding thermal cycle, when the material is in the temperature range where carbides are stable. The carbides precipitate at grain boundaries, where the diffusion rate is higher.

The paper constructs a crystal plasticity finite element model to study the effect of carbides on the stress and strain distribution in the weld. The model includes carbides at the grain boundaries, and it simulates the deformation behavior of the material under load.

Crystal Plasticity FEM: Method and Findings

The crystal plasticity finite element method is a powerful tool for studying the deformation behavior of materials at the microscale. The method models the material as a collection of grains, each with its own crystal orientation and slip systems. The deformation is simulated by activating the slip systems in response to the applied load.

The paper's model includes carbides at the grain boundaries. The carbides are modeled as hard, elastic particles that do not deform plastically. When the material is loaded, the carbides act as stress concentrators, creating local stress concentrations in the surrounding material.

The simulation results show that the carbides have a significant effect on the stress and strain distribution. As the carbide content increases, the stress concentration in the inclusion region increases. The triple junctions — where three grains meet — are identified as the weakest points in the weld. The stress distribution at the grain boundary intersections is asymmetric, and these points are typically the first to fail, becoming the fracture source.

Implications for Weld Design and Service

The findings have important implications for the design and service of dissimilar steel welds. The presence of carbides at grain boundaries creates stress concentrations that can initiate cracks. The triple junctions are particularly vulnerable, and they are likely to be the fracture initiation sites.

To mitigate the risk, the welding procedure should be designed to minimize carbide precipitation. This can be achieved by controlling the heat input, using a filler metal with a composition that is resistant to carbide precipitation, and applying post-weld heat treatment to dissolve the carbides.

The paper also highlights the value of numerical simulation in understanding the behavior of welds. The crystal plasticity FEM provides a detailed picture of the stress and strain distribution at the microscale, which is difficult to obtain experimentally. This information can be used to optimize the welding procedure and to predict the service life of the weld.

The practical takeaway is that carbide precipitation is a real concern in dissimilar steel welds, and it should be considered in the design and fabrication. The triple junctions are the weak points, and they should be the focus of inspection and monitoring. A well-designed welding procedure, with careful control of heat input and post-weld treatment, can minimize the risk of carbide-related failure.