Effect of Rare Earth Oxides on Impact Toughness and Primary Solidification Structure of Hardfacing Metal
1. Literature Overview and Metallurgical Context
This paper, from Jixi University and Qiqihar No. 1 Machine Tool Plant, published in Hot Working Technology in 2000, investigates the effect of rare earth oxides on the impact toughness and primary solidification structure of hardfacing metal. The authors found that rare earth oxides improve the toughness of the hardfacing metal at its working temperature and refine the primary solidification structure, causing a transition from columnar to equiaxed grains.
This is a classic metallurgical study with direct practical application. Hardfacing metals are typically used in demanding applications where wear resistance is the primary requirement, but toughness is also critical — a hardfacing that is too brittle will crack and spall in service. Rare earth oxides are known to be effective grain refiners in steel, and this paper demonstrates their value in hardfacing alloys.
2. Technical Points and Metallurgical Mechanisms
2.1 The Role of Rare Earth Oxides
Rare earth oxides, such as cerium oxide (Ce2O3) and lanthanum oxide (La2O3), are added to welding consumables or directly to the weld pool. They act as:
- Grain refiners: Rare earth oxides have high melting points and can serve as heterogeneous nucleation sites for the solidifying metal. This promotes the formation of fine equiaxed grains instead of coarse columnar grains.
- Deoxidizers: Rare earth elements are strong deoxidizers and can remove oxygen from the weld pool, reducing porosity and oxide inclusions.
- Modifiers: Rare earth elements can modify the morphology of inclusions and precipitates, making them less detrimental to toughness.
2.2 The Effect on Primary Solidification Structure
The paper reports that the addition of rare earth oxides causes the primary solidification structure to transition from columnar to equiaxed grains. This is significant because:
- Columnar grains are anisotropic and have weak boundaries between them, making them susceptible to cracking;
- Equiaxed grains are isotropic and have more uniform properties, improving toughness and reducing the risk of solidification cracking.
The grain refinement also reduces the grain size, which increases the strength and toughness of the hardfacing metal through the Hall-Petch relationship.
2.3 The Effect on Impact Toughness
The paper reports that rare earth oxides improve the impact toughness of the hardfacing metal at its working temperature. This is likely due to:
- The finer grain size, which increases the energy required for crack propagation;
- The reduction in inclusions and porosity, which reduces crack initiation sites;
- The modification of the microstructure, which may reduce the formation of brittle phases.
3. Engineering Practice: What This Means for Hardfacing Applications
3.1 The Application of Rare Earth Oxides in Welding Consumables
Rare earth oxides can be added to welding consumables in several ways:
- As a coating ingredient in covered electrodes;
- As a component of the flux in submerged arc welding;
- As an addition to the core wire in flux-cored wire;
- As a powder addition in plasma transferred arc (PTA) hardfacing.
The method of addition must be carefully controlled to ensure a uniform distribution of the rare earth oxides in the weld pool. Excessive addition can cause slag problems or reduce the fluidity of the molten pool.
3.2 The Trade-Off Between Hardness and Toughness
Hardfacing alloys are often designed for maximum hardness and wear resistance, but this can come at the expense of toughness. The addition of rare earth oxides can improve toughness without significantly reducing hardness, making the hardfacing more resistant to cracking and spalling in service. This is particularly important in applications involving impact loading, thermal cycling, or abrasive wear in a corrosive environment.
3.3 The Practical Benefits
In my experience, hardfacing failures are often due to cracking and spalling rather than pure wear. The hardfacing may have excellent hardness, but if it is brittle, it will crack under impact or thermal stress, and the cracked layer will then spall off, exposing the base metal to rapid wear. The addition of rare earth oxides, by improving toughness and refining the grain structure, can significantly extend the service life of hardfaced components.
4. Study Insights and Reflections
This paper is a good example of how a relatively small addition of a minor element can have a significant effect on the properties of a hardfacing metal. The rare earth oxides are not expensive, and the improvement in toughness and grain refinement can be substantial.
However, I would add a note of caution. The effect of rare earth oxides depends on:
- The type and amount of rare earth oxide;
- The base composition of the hardfacing alloy;
- The welding process and parameters;
- The cooling rate of the weld pool.
A rare earth oxide addition that works well for one alloy system may not work for another. The paper's findings should be validated for the specific hardfacing alloy and application before being adopted in production.
I would also emphasize the importance of understanding the mechanism. The transition from columnar to equiaxed grains is a key indicator of grain refinement, but it is not the only factor affecting toughness. The reduction in inclusions and porosity, the modification of the microstructure, and the distribution of the rare earth oxides all play a role.
5. Conclusion
Rare earth oxides improve the impact toughness of hardfacing metal at its working temperature and refine the primary solidification structure, causing a transition from columnar to equiaxed grains. The mechanism involves heterogeneous nucleation, deoxidation, and modification of inclusions and precipitates. The practical benefits include improved resistance to cracking and spalling, extended service life, and reduced maintenance costs. The paper provides a valuable insight into the metallurgical control of hardfacing alloys, and its findings can be applied to a wide range of hardfacing applications where toughness is as important as wear resistance.
Zhuojin Pipe Fitting Co., Ltd