ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

TiC-Reinforced Wear-Resistant Hardfacing with Double-Electrode Arc Welding: Microstructure and Hardness Analysis

1. Literature Overview and Context

The 2020 paper by Li Lingyu, Zhao Wei, Zhang Hui, and Gao Liying from Qilu University of Technology (Shandong Academy of Sciences) investigates the use of double-electrode arc welding for TiC-reinforced wear-resistant hardfacing. The paper compares the microstructure and microhardness of deposits produced by double-electrode arc welding and conventional single-electrode arc welding at three welding currents: 150 A, 180 A, and 210 A. The key finding is that the double-electrode process produces a finer microstructure and higher hardness than the conventional process, with the maximum hardness occurring at 180 A for both processes.

This is a significant contribution to the field of wear-resistant hardfacing because it demonstrates that the double-electrode process can improve the properties of TiC-reinforced deposits. TiC is a hard ceramic phase that is used to reinforce wear-resistant overlays, and its distribution and size are critical to the performance of the deposit. The paper's finding that the double-electrode process produces a finer microstructure is important because a finer TiC distribution improves wear resistance.

2. Core Technical Points: The Double-Electrode Arc Welding Process

Double-electrode arc welding (DEAW) is a variant of conventional arc welding in which two electrodes are used simultaneously. The two electrodes can be arranged in different configurations:

The paper uses the twin-electrode configuration, which is the simplest and most common. The key advantage of DEAW is that it can achieve a higher deposition rate without increasing the heat input per unit length. This results in a finer microstructure because the cooling rate is faster.

2.1 TiC-Reinforced Hardfacing

TiC is a hard ceramic phase that is used to reinforce wear-resistant overlays. It is typically formed in-situ during welding by reacting titanium with carbon. The in-situ formation of TiC has several advantages:

The paper uses the in-situ method, which is the most practical approach for industrial applications.

3. Process Analysis: Effect of Welding Current on Microstructure and Hardness