ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

CNC Tracking System for Large Head Surfacing Welding

Literature Overview and Core Findings

Yu Zhonghai from Yanshan University presents a novel CNC tracking system designed for the longitudinal tracking of the welding torch during the surfacing of large dished heads. The system addresses a critical challenge in the fabrication of pressure vessels: maintaining the welding torch at the correct position relative to the weld seam as the head rotates and the torch moves along the curved surface. The paper analyzes the tracking precision and demonstrates that the system can operate reliably in the strong electromagnetic interference environment created by the welding arc.

This work is particularly relevant to the fabrication of large-diameter heads for pressure vessels, where manual tracking is impractical and conventional mechanical tracking systems are inadequate. The development of a CNC tracking system that can maintain positional accuracy in the presence of welding current and magnetic fields is a significant engineering achievement.

Technical Challenge and System Architecture

The Tracking Problem

In the surfacing of a large dished head, the welding torch must follow the weld seam precisely as the head is rotated on a positioner. The seam may be a spiral, a circle, or a complex curve depending on the head geometry. The torch position must be adjusted continuously to compensate for the curvature of the head and any variations in the seam position. Manual tracking is not feasible for large heads, and mechanical tracking systems are limited in their accuracy and flexibility.

System Architecture

The CNC tracking system consists of a position sensor, a controller, and a servo drive mechanism. The sensor detects the position of the weld seam relative to the torch, and the controller calculates the required correction. The servo drive mechanism moves the torch to the corrected position. The system is designed to operate in real time, with a response time that is fast enough to compensate for the movement of the head.

Component Function Specification
Position sensor Detects seam position Laser or vision sensor, 0.1mm resolution
Controller Calculates correction CNC controller, 1ms cycle time
Servo drive Moves torch AC servo motor, 0.01mm positioning accuracy
Power supply Provides welding current Inverter-based, 400A capacity

Electromagnetic Interference Mitigation

The welding arc generates strong electromagnetic fields that can interfere with the position sensor and the control electronics. The paper describes several measures to mitigate this interference. First, the sensor is shielded with a metallic enclosure. Second, the signal cables are shielded and grounded. Third, the control electronics are located away from the welding area. Fourth, the sensor signal is filtered to remove the high-frequency noise generated by the welding arc.

Tracking Precision Analysis

Accuracy Requirements

The tracking precision required for head surfacing depends on the welding process and the deposit thickness. For submerged arc welding, the torch position must be maintained within ±1mm to achieve consistent bead width and penetration. For gas metal arc welding, the requirement is typically ±0.5mm. The CNC tracking system is designed to achieve a precision of ±0.1mm, which provides a significant margin over the minimum requirement.

Error Sources

The paper identifies several sources of tracking error. First, the sensor may have a systematic error due to calibration or installation. Second, the controller may have a computational error due to the algorithm used for position calculation. Third, the servo drive may have a positioning error due to backlash or load variations. Fourth, the mechanical system may have a compliance error due to the stiffness of the torch holder and the positioner.

Error Compensation

The tracking system includes several features to compensate for these errors. First, the sensor is calibrated against a reference position before each welding cycle. Second, the controller uses a predictive algorithm that anticipates the torch position based on the head rotation speed and the seam geometry. Third, the servo drive uses a feedback loop that continuously corrects the position based on the actual torch position. Fourth, the mechanical system is designed with high stiffness to minimize compliance error.

Production Application Assessment

Head Geometry Considerations

The tracking system must accommodate the specific geometry of the head being surfaced. For a torispherical head, the seam follows a complex curve that changes from a spherical shape at the crown to a toroidal shape at the knuckle. The tracking system must be able to follow this curve without losing the seam. The paper demonstrates that the CNC tracking system can handle this geometry, but the controller must be programmed with the specific head geometry.

Process Integration

The tracking system is integrated with the welding process through a common controller. The welding parameters such as current, voltage, and travel speed are synchronized with the torch position. This ensures that the deposit is uniform and that the torch is always at the correct position relative to the seam. The integration also allows for automatic start and stop of the welding process at the beginning and end of each pass.

Quality Control

The tracking system provides a record of the torch position throughout the welding cycle, which can be used for quality control. If the torch position deviates from the setpoint by more than a specified tolerance, the system can generate an alarm and stop the welding process. This is a valuable feature for ensuring that the surfacing layer meets the required specifications.

Study Insights and Reflections

The development of a CNC tracking system for head surfacing is a significant advancement in welding automation. The paper demonstrates that the system can achieve the required tracking precision in the presence of strong electromagnetic interference, which is a challenging environment for any control system. The key to success is the combination of a robust sensor, a fast controller, and a high-precision servo drive, all designed to work together as a system.

The practical implication is that large head surfacing can now be performed with a high degree of automation, which improves productivity and reduces the risk of human error. The tracking system also enables the use of more efficient welding processes such as submerged arc welding, which requires precise torch positioning to achieve consistent results.

Reference Value and Outlook

This paper is a valuable reference for welding engineers and automation specialists who are involved in the fabrication of pressure vessel heads. The system architecture and tracking precision analysis provide a useful framework for the design of similar systems. Future work should extend the tracking system to other welding applications such as pipe-to-pipe welding and nozzle attachment, where the same tracking principles can be applied.