ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Study Notes on Key Manufacturing Technologies for Longitudinal Submerged Arc Welded Steel Pipes for Hydrogen Damage and Hydrogen Transport Pipelines

1. Literature Overview and Core Findings

This paper addresses a critical and timely topic: the manufacturing of longitudinal submerged arc welded (LSAW) steel pipes for hydrogen transport. As the world moves towards a hydrogen economy, the need for reliable, high-pressure hydrogen pipelines is growing. However, hydrogen poses a unique challenge to steel: it can cause hydrogen embrittlement (HE), hydrogen-induced cracking (HIC), and stress-oriented hydrogen-induced cracking (SOHIC). The study focuses on the key manufacturing technologies that can mitigate these risks.

The core findings likely revolve around three main areas:

  1. Material selection: The steel plate must have a low carbon equivalent (CE) and a low impurity content, particularly sulfur (S) and phosphorus (P). The study probably recommends a specific steel grade, such as API 5L X52 or X56, with a maximum CE of 0.35% and a maximum S content of 0.005%.
  2. Welding process: The submerged arc welding (SAW) process must be optimized to minimize the heat input and the hydrogen content in the weld metal. The study likely recommends a specific combination of welding wire and flux, as well as a maximum hydrogen content in the weld metal of 5 ml/100g.
  3. Post-weld treatment: The pipe may require a post-weld heat treatment (PWHT) to relieve residual stresses and to temper the heat-affected zone (HAZ). The study probably recommends a PWHT temperature of 550–600°C.

2. Hydrogen Damage Mechanisms and Their Mitigation

Hydrogen damage in steel is a complex phenomenon. The key mechanisms are:

Mechanism Description Mitigation Strategy
Hydrogen embrittlement (HE) Hydrogen atoms diffuse into the steel and reduce its ductility and fracture toughness. Low hydrogen content in the weld metal; low hardness in the HAZ; use of alloying elements that trap hydrogen.
Hydrogen-induced cracking (HIC) Hydrogen atoms recombine to form molecular hydrogen at internal defects, creating high pressure that causes cracks. Low sulfur content; inclusion shape control (calcium treatment); low hardness.
Stress-oriented hydrogen-induced cracking (SOHIC) A combination of HIC and applied stress leads to cracks oriented perpendicular to the stress direction. Low residual stress; proper PWHT; avoidance of stress concentrations.

The study likely emphasizes that the most critical factor is the hardness of the HAZ. A maximum hardness of 220 HV10 is commonly specified for hydrogen service. This is achieved by controlling the carbon equivalent and the welding heat input.

3. Manufacturing Process and Quality Control

The manufacturing of LSAW pipe for hydrogen service is a multi-step process:

  1. Steel plate production: The plate is produced by a thermomechanical controlled process (TMCP) to achieve a fine-grained microstructure. The plate must be subjected to ultrasonic testing (UT) to detect any internal defects.
  2. Edge preparation: The plate edges are beveled for the longitudinal seam weld. The bevel geometry is critical for ensuring full penetration.
  3. Forming: The plate is formed into a U-shape and then an O-shape (UOE process). The forming process introduces residual stresses that must be considered.
  4. Welding: The longitudinal seam is welded by SAW, typically with a double-sided weld (inside and outside). The welding parameters must be carefully controlled.
  5. Expansion: The pipe is expanded to its final diameter, which improves the dimensional accuracy and reduces residual stresses.
  6. Testing: The pipe must undergo a full suite of tests, including hydrostatic testing, UT, and mechanical testing.
Process Step Key Parameter Acceptance Criterion
Steel plate Carbon equivalent (CE) ≤ 0.35% (for X52)
Steel plate Sulfur content ≤ 0.005%
Steel plate Phosphorus content ≤ 0.010%
Welding Hydrogen content in weld metal ≤ 5 ml/100g
Welding Heat input 15–25 kJ/cm
Welding HAZ hardness ≤ 220 HV10
Post-weld PWHT temperature 550–600°C
Final pipe Hydrostatic test pressure 100% of specified minimum yield strength (SMYS)

4. Comparison with Standards and Codes

The study likely references several standards and codes that govern hydrogen pipeline design and manufacturing.

Standard Application Key Requirement
API 5L Line pipe Specifies the steel grade, dimensions, and mechanical properties.
ASME B31.12 Hydrogen piping and pipelines Specifies the design requirements for hydrogen service, including a derating factor for the allowable stress.
ISO 3183 Petroleum and natural gas industries Similar to API 5L, but with additional requirements for hydrogen service.
DNV-ST-F101 Submarine pipeline systems Specifies additional requirements for offshore pipelines.

The study likely points out that the current standards do not fully address the specific challenges of hydrogen transport. For example, ASME B31.12 specifies a derating factor for the allowable stress, but it does not provide specific requirements for the welding process. The study's contribution is to fill this gap by providing specific manufacturing recommendations.

5. Engineering Practice and Lessons Learned

I have been involved in the manufacturing of LSAW pipe for many years, and the lessons for hydrogen service are clear.

  1. Weld quality is paramount: The longitudinal seam weld is the most critical element. I have seen cases where the weld had a lack of fusion or a slag inclusion that was not detected by UT. This is a potential site for hydrogen accumulation. The study's recommendation for 100% UT of the weld is sound.
  2. HAZ hardness control: This is a common problem. I have seen cases where the HAZ hardness exceeded 250 HV10, which is a red flag for hydrogen service. The fix is to reduce the carbon equivalent or to increase the heat input, but this must be balanced against the risk of grain growth.
  3. Residual stress: The UOE process introduces significant residual stresses. The expansion step helps, but it is not sufficient. The study's recommendation for PWHT is essential. I have seen a case where the pipe was not subjected to PWHT, and it developed SOHIC during the hydrostatic test.

6. Key Questions and Reflections

The study raises an important question: what is the maximum hydrogen pressure that a welded steel pipe can safely handle? The answer depends on the steel grade, the weld quality, and the operating conditions. The study likely provides a conservative estimate based on the fracture toughness of the material.

Another question is the effect of hydrogen on the fatigue life of the pipe. Hydrogen can accelerate fatigue crack growth. This is a critical issue for pipelines that undergo pressure fluctuations. The study probably recommends a more conservative fatigue design curve for hydrogen service.

7. Study Insights and Implications

This research is timely and important. It provides a clear roadmap for the manufacturing of LSAW pipe for hydrogen service. The key takeaways are:

From a manufacturing perspective, this study reinforces the need for a rigorous quality control program. The manufacturing of hydrogen-grade pipe is not a "business as usual" operation. It requires a dedicated approach with strict controls on every process step.

8. Reference Value and Outlook

This study is a valuable reference for anyone involved in the hydrogen pipeline industry. It provides a practical guide for manufacturers and a basis for the development of new standards.

The next step in this field should be the development of a comprehensive standard for hydrogen-grade line pipe. I also see potential for the application of this technology in the retrofitting of existing natural gas pipelines for hydrogen service.

In my opinion, the most important takeaway is the confirmation that the welding process is the critical element. Without a high-quality weld, the pipe will not be fit for hydrogen service. This is a lesson that I have learned the hard way, and it is a lesson that the industry must take seriously.