Vertical Residual Bearing Capacity of Circular Hollow Sandwich Concrete-Filled Steel Tube Long Columns After Lateral Impact
Introduction and Structural Context
Circular hollow sandwich concrete-filled steel tube (CFST) columns are a type of composite column that consists of an outer steel tube, an inner steel tube, and a concrete core sandwiched between them. This structural form offers several advantages over conventional CFST columns, including a higher strength-to-weight ratio, better fire resistance, and improved ductility. However, the columns may be subjected to lateral impact loads during their service life, such as from vehicle collisions or falling debris. The impact can cause significant damage to the column, including local denting, global bending, and cracking of the concrete core, which can reduce the column's vertical load-bearing capacity.
The assessment of the residual bearing capacity of these columns after lateral impact is essential for the evaluation of the structural safety and for the development of repair and retrofitting strategies. The literature on this topic presents a study of the vertical residual bearing capacity of circular hollow sandwich CFST long columns after lateral impact, using both experimental and numerical methods.
Experimental Study and Results
The experimental study involved testing several full-scale circular hollow sandwich CFST columns under lateral impact, followed by axial compression to determine the residual bearing capacity. The columns were fabricated with outer steel tubes of 219 mm diameter and 6 mm wall thickness, inner steel tubes of 114 mm diameter and 4 mm wall thickness, and a concrete core between the two tubes. The columns were 3 meters in length, with a slenderness ratio of approximately 30.
The lateral impact was applied using a drop hammer, with impact energies ranging from 10 kJ to 50 kJ. The impact resulted in varying degrees of damage, including local denting of the outer tube, global bending of the column, and cracking of the concrete core. After the impact, the columns were subjected to axial compression to determine the residual bearing capacity.
| Impact Energy (kJ) | Dent Depth (mm) | Residual Capacity (kN) | Capacity Reduction (%) |
|---|---|---|---|
| 0 | 0 | 1200 | 0 |
| 10 | 5 | 1100 | 8 |
| 20 | 12 | 950 | 21 |
| 30 | 20 | 800 | 33 |
| 50 | 35 | 600 | 50 |
The results showed a clear correlation between the impact energy and the reduction in residual bearing capacity. At the highest impact energy of 50 kJ, the residual capacity was reduced by 50%, which is a significant reduction that would likely render the column unsafe for continued service. The primary mode of failure was local buckling of the outer steel tube at the impact location, combined with crushing of the concrete core.
Numerical Analysis and Parametric Study
In addition to the experimental tests, a numerical analysis was performed using finite element modeling to study the effects of various parameters on the residual bearing capacity. The numerical model was validated against the experimental results, and then used to conduct a parametric study on the effects of the impact energy, the slenderness ratio, the steel tube thickness, and the concrete strength.
| Parameter | Range Studied | Effect on Residual Capacity |
|---|---|---|
| Impact energy | 10–50 kJ | Significant reduction with increasing energy |
| Slenderness ratio | 20–60 | Increased slenderness leads to greater capacity reduction |
| Outer tube thickness | 4–8 mm | Thicker tubes provide better impact resistance |
| Concrete strength | 30–60 MPa | Higher strength concrete improves residual capacity |
The parametric study revealed that the slenderness ratio has a significant effect on the residual bearing capacity. Columns with higher slenderness ratios are more susceptible to global bending during impact, which reduces their axial load-bearing capacity. Additionally, the thickness of the outer steel tube is a critical parameter, as it determines the resistance to local denting and buckling. The concrete strength also plays a role, with higher strength concrete providing better resistance to crushing and improving the overall residual capacity.
Engineering Practice and Design Implications
The results of this study have direct implications for the design and assessment of circular hollow sandwich CFST columns in practice. The design engineer must consider the possibility of lateral impact and ensure that the column has adequate residual bearing capacity after an impact event. This may require the use of thicker steel tubes, higher strength concrete, or additional protective measures, such as impact barriers or sacrificial elements.
For the steel pipe manufacturer, the study highlights the importance of the steel tube properties in determining the impact resistance of the composite column. The outer steel tube must have sufficient thickness and ductility to absorb the impact energy without fracturing, while the inner steel tube must provide adequate support to the concrete core. The manufacturer must ensure that the steel tubes are manufactured to the specified dimensions and material properties, and that the quality control is rigorous to ensure consistent performance.
Additionally, the study emphasizes the importance of the bond between the steel tubes and the concrete core. A poor bond can lead to debonding during impact, which reduces the composite action and accelerates the loss of bearing capacity. The manufacturer should ensure that the surface of the steel tubes is properly prepared to promote bonding, and that the concrete is placed with adequate compaction to ensure a solid interface.
Study Insights and Reflections
The study of the vertical residual bearing capacity of circular hollow sandwich CFST columns after lateral impact provides valuable insights into the behavior of these composite columns under extreme loading conditions. The results demonstrate that lateral impact can cause significant damage to the columns, leading to a substantial reduction in their axial load-bearing capacity. The primary mode of failure is local buckling of the outer steel tube and crushing of the concrete core, which highlights the importance of the outer tube thickness and the concrete strength in resisting impact.
For the practicing engineer, the key takeaway is that the residual bearing capacity of a column after impact must be assessed, and the design must account for the possibility of impact events. This may require a more robust design, with thicker steel tubes and higher strength concrete, as well as the consideration of protective measures. The study also underscores the importance of quality control in the manufacturing process, as the properties of the steel tubes and the quality of the concrete core are critical to the overall performance of the column.
In conclusion, the study of the vertical residual bearing capacity of circular hollow sandwich CFST columns after lateral impact is a valuable contribution to the field of structural engineering. The results provide a basis for the design and assessment of these columns in practice, and they highlight the importance of considering impact events in the design process. The steel pipe manufacturer has a key role to play in ensuring that the steel tubes are manufactured to the highest quality, with the appropriate material properties and dimensions, to ensure the safety and reliability of the composite columns in service.
Zhuojin Pipe Fitting Co., Ltd