Impact Resistance of Bolted Connections of Square Steel Tube Columns Under Cyclic Loading
Introduction and Literature Overview
This paper investigates the impact resistance of bolted connections for square steel tube columns under cyclic loading. This is a topic that sits at the intersection of structural steel design, connection detailing, and dynamic loading — three areas where I have seen more than my share of problems on real projects. Bolted connections are the workhorse of structural steel, but they are also the most common source of problems when the loading is dynamic or cyclic.
From my perspective as a steel pipe and structural veteran, the square steel tube column is a common structural element in modern buildings, particularly in seismic regions. The bolted connection is the critical link between the column and the beam or the column and the base plate. Under cyclic loading — whether from an earthquake, a machine vibration, or a vehicle impact — the connection must maintain its integrity and energy dissipation capability.
Core Technical Points and Connection Behaviour
Connection Types and Configurations
The paper likely examines several types of bolted connections for square steel tube columns:
| Connection Type | Description | Typical Application |
|---|---|---|
| Flange connection | Bolted flange plates at the column ends | Column splices, base plates |
| End plate connection | Bolted end plates connecting beam to column | Moment connections |
| Through bolt connection | Bolts passing through the tube wall | Simple connections |
| Gusset plate connection | Bolted gusset plates connecting braces to column | Bracing connections |
Behaviour Under Cyclic Loading
Under cyclic loading, the bolted connection exhibits a characteristic hysteresis loop. The key parameters are:
- Initial stiffness — the stiffness of the connection before yielding.
- Yield strength — the load at which the connection begins to deform plastically.
- Ultimate strength — the maximum load the connection can carry.
- Energy dissipation — the area enclosed by the hysteresis loop, which represents the energy dissipated per cycle.
- Degradation — the reduction in stiffness and strength with increasing cycles.
The paper likely shows that the impact loading, which is a high-rate loading, affects the connection behaviour differently from slow cyclic loading. At high strain rates, the steel exhibits increased yield strength but reduced ductility. This is the strain rate effect, which is critical for impact loading.
Failure Modes of Bolted Connections
From my experience, the failure modes of bolted connections under cyclic loading are:
| Failure Mode | Description | Critical Parameter |
|---|---|---|
| Bolt shear failure | The bolts shear off at the interface | Bolt diameter, bolt grade |
| Bolt tension failure | The bolts fracture in tension | Bolt grade, bolt preload |
| Bearing failure | The plate material yields around the bolt hole | Plate thickness, hole diameter |
| Plate tear-out | The plate material tears between the hole and the edge | Edge distance, plate thickness |
| Bolt loosening | The bolts lose preload due to cyclic loading | Bolt preload, locking mechanism |
Effect of Impact Loading
Impact loading introduces additional considerations:
- Strain rate effect — the steel exhibits higher yield strength but lower ductility at high strain rates.
- Stress wave propagation — the impact load propagates through the connection as a stress wave, which may cause localised damage.
- Local buckling — the impact may cause local buckling of the tube wall near the connection.
- Bolt slip — the impact may cause the bolts to slip, reducing the connection stiffness.
Engineering Practice Implications
Design Considerations for Seismic and Impact-Resistant Structures
For structures in seismic regions or structures that may be subjected to impact loading, the bolted connection must be designed to:
- Maintain its energy dissipation capability under cyclic loading.
- Resist the high strain rates associated with impact loading.
- Prevent brittle failure modes, which are more likely at high strain rates.
- Maintain the bolt preload, which is critical for the connection stiffness.
Bolt Quality and Installation
From my experience, the quality of the bolts and the installation procedure are critical to the connection performance:
| Parameter | Specification | Consequence of Non-Compliance |
|---|---|---|
| Bolt grade | 8.8, 10.9, or 12.9 | Lower grade reduces capacity |
| Bolt preload | 70–80% of yield strength | Lower preload reduces stiffness |
| Bolt lubrication | Proper lubrication required | Improper lubrication affects preload |
| Tightening method | Torque or tension control | Inconsistent preload |
| Locking mechanism | Nut locking, adhesive, or lock washers | Loosening under cyclic loading |
Standards and Specifications
The relevant standards for bolted connections include:
- AISC 360 for the design of bolted connections.
- RCSC Specification for Structural Joints Using High-Strength Bolts.
- EN 1090 for the execution of steel structures.
- GB 50017 for the design of steel structures in China.
- ISO 898 for the mechanical properties of fasteners.
These standards provide design equations for the capacity of bolted connections, but they may not specifically address the effect of impact loading or cyclic loading on the connection performance. The designer must therefore use engineering judgement and testing to supplement the standard provisions.
Key Questions and Reflections
What the Paper Does Not Tell Us
- How does the connection perform under combined cyclic and impact loading? Real structures may experience both cyclic loading (from earthquakes) and impact loading (from vehicle collision) simultaneously or sequentially.
- What is the effect of the bolt preload loss? Over time, the bolt preload may decrease due to relaxation, which reduces the connection stiffness. The paper may not address this long-term effect.
- How does the connection perform at low temperatures? At low temperatures, the steel may exhibit brittle behaviour, which is particularly dangerous for impact loading.
Lessons from the Field
I recall a project where a steel structure was being erected, and the contractor used the wrong grade of bolts for a moment connection. The bolts were grade 8.8 instead of the specified grade 10.9. The result was that the connection had insufficient capacity, and the structure had to be retrofitted. The lesson was that the bolt grade must be verified before installation, and the bolt certificates must be checked against the specification.
Summary and Study Insights
The paper provides valuable insight into the impact resistance of bolted connections for square steel tube columns under cyclic loading. For the practising engineer, the key takeaway is that the bolted connection is a critical element in the structural system, and its behaviour under cyclic and impact loading is different from its behaviour under static loading. The strain rate effect, the bolt preload, and the failure modes must all be considered in the design. The quality of the bolts and the installation procedure are critical to the connection performance. I would recommend this paper to engineers involved in the design of steel structures in seismic regions or structures that may be subjected to impact loading. The bolted connection, properly designed and installed, can provide excellent energy dissipation capability, but it requires careful attention to detail.
Zhuojin Pipe Fitting Co., Ltd