ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Bypass Shunt MIG Arc Fusion-Brazing of Magnesium Alloy to Galvanized Steel

Literature Overview and Core Findings

This paper from Harbin Engineering University's Ship Engineering College addresses the joining of AZ31 magnesium alloy to Q235 galvanized steel using a bypass shunt MIG arc fusion-brazing process. The bypass shunt technique is a novel approach where a portion of the welding current is shunted through a bypass wire, reducing the current that passes through the main filler wire. This allows for better control of the heat input and the droplet transfer. The authors conducted experiments with AZ31 magnesium alloy and Q235 galvanized steel, achieving a stable welding process and a beautiful weld bead. They used optical microscopy, high-speed photography, and tensile testing to analyze the joint microstructure, droplet transfer, and mechanical properties.

The key finding is that the bypass shunt causes a repelled droplet transfer, which increases the droplet transfer time and allows for more uniform wetting and spreading of the molten metal on the steel surface. This ensures good elemental diffusion at the interface. The tensile strength of the joint reaches 133 MPa, which is about 70% of the base metal strength. The fracture occurs in the magnesium alloy weld, and the fracture morphology is ductile.

This is a significant result for a magnesium-steel joint, which is notoriously difficult to produce because of the large difference in melting points and the formation of brittle intermetallic compounds. The bypass shunt technique provides a way to control the heat input and the droplet transfer, which is critical for achieving a sound joint.

Technical Parameters and Process Analysis

Parameter Value / Range Practical Significance
Magnesium alloy AZ31 Common wrought magnesium alloy
Steel Q235 galvanized Zinc coating aids wetting but can cause porosity
Process Bypass shunt MIG arc fusion-brazing Controls heat input and droplet transfer
Droplet transfer mode Repelled transfer Increases transfer time, improves wetting
Tensile strength 133 MPa (70% of base metal) Acceptable for many structural applications
Fracture location Magnesium alloy weld Indicates joint is stronger than the weld
Fracture mode Ductile Good toughness, no brittle failure

The repelled droplet transfer is the key technical innovation. In conventional MIG welding, the droplet transfer is usually short-circuit or spray, which is fast and can cause spatter. The bypass shunt changes the electromagnetic forces on the droplet, causing it to be repelled from the wire. This slows down the transfer and allows the droplet to spread more evenly on the steel surface, which improves the wetting and the interfacial bonding. This is a clever solution to a difficult problem.

Engineering Practice and Shop Floor Insights

Magnesium-steel joints are a challenge in shipbuilding and automotive construction because magnesium is lightweight and has good specific strength, but it is difficult to weld to steel. The main problems are the formation of brittle intermetallic compounds at the interface and the high thermal conductivity of magnesium, which causes rapid solidification and can lead to porosity. The bypass shunt technique addresses these issues by controlling the heat input and the droplet transfer.

In my experience, the galvanized coating on the steel is a double-edged sword. It helps with wetting because the zinc melts at a low temperature and acts as a flux, but it can also cause porosity if it vaporizes and gets trapped in the weld. The bypass shunt process appears to mitigate this by reducing the heat input and allowing the zinc to be expelled before the weld pool solidifies.

Key Questions and Reflections

The paper does not address the long-term corrosion resistance of the joint. Magnesium is anodic to steel, and in a marine environment, the joint will be subject to galvanic corrosion. The zinc coating may provide some protection, but it will be consumed over time. I would want to see corrosion tests, especially salt spray tests, before approving this for shipbuilding applications.

Another question is the effect of the bypass shunt current on the weld pool geometry and the heat-affected zone. The paper shows that the joint strength is 70% of the base metal, but it does not provide detailed information on the HAZ width or the grain size. This is important for predicting the fatigue life of the joint.

Study Insights and Implications

This paper is a valuable reference for anyone working on dissimilar metal joining, particularly magnesium to steel. It demonstrates that the bypass shunt technique can produce a sound joint with a strength of 70% of the base metal, which is excellent for a magnesium-steel joint. The repelled droplet transfer is a key innovation that improves the wetting and the interfacial bonding.

For my own work, this paper reinforces the importance of controlling the droplet transfer mode in MIG welding. The droplet transfer is not just a cosmetic issue; it directly affects the joint quality and the mechanical properties. The bypass shunt technique is a practical way to control the droplet transfer without changing the welding parameters significantly.

Reference Value and Outlook

This paper is a solid reference for the bypass shunt MIG arc fusion-brazing of magnesium to steel. It provides a clear process description, quantitative results, and a microstructural analysis. I would keep it in the welding engineering library and use it as a starting point for any magnesium-steel joining project.

The next step in this research should be to test the process on different magnesium alloys and steel grades, to evaluate corrosion resistance, and to develop a process window that can be used for production. The bypass shunt current should also be optimized for different joint configurations and thicknesses.