ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Numerical Simulation of Aluminum MIG Welding Using an Improved Combined Heat Source Model

Literature Context

The paper by Sun Zhenbang and colleagues from Inner Mongolia University of Technology and Inner Mongolia North Heavy Industries Group, published in the Journal of Welding (2023, Vol. 44, No. 2, pp. 111–116), addresses a practical problem in welding simulation: how to accurately model the heat source for aluminum MIG welding. The authors use a CMOS high-speed camera to detect and analyze droplet transfer behavior, determining the droplet transfer frequency and velocity. Based on a theoretical analysis of the heat source characteristics, thermal action modes, and weld morphology, they develop a combined volumetric heat source distribution model for MIG welding. The MIG arc is treated as a classic double-ellipsoid heat source model, while the droplet energy is represented as a uniform spherical heat source model. The spherical model incorporates both the thermal energy and kinetic energy of the droplet, enabling simulation of the droplet's impact on the weld pool. Using this model, they build a finite element model of the temperature field for thick-plate aluminum MIG welding. The simulated weld fusion line profile and morphology match the actual welding results, confirming that the model can accurately describe the finger-like penetration characteristics and heat conduction process.

Model Development

Heat Source Component Model Type Key Feature
MIG arc Double-ellipsoid Classic Goldak model
Droplet energy Uniform sphere Includes thermal + kinetic energy
Combined Volumetric Captures finger-like penetration

The finger-like penetration is a characteristic feature of MIG welding of aluminum, where the arc produces a wide, shallow weld at the top and the droplet impact produces a narrow, deep penetration at the center. Traditional heat source models, such as the double-ellipsoid alone, cannot capture this because they do not account for the droplet's kinetic energy. The droplet impact creates a mechanical force that pushes the molten metal downward, enhancing penetration in the center. By adding the droplet as a spherical heat source with both thermal and kinetic energy, the authors are able to reproduce the finger-like profile. The validation against actual weld cross-sections is the key strength of this work.

Validation and Application

The validation result — that the simulated fusion line matches the actual weld morphology — is the most important part of the paper for practical purposes. If a heat source model cannot reproduce the actual weld shape, then any predictions of residual stress, distortion, or cooling rate are suspect. The finger-like penetration is not just a cosmetic feature; it affects the stress concentration at the weld root and the cooling rate in the deep penetration zone. For thick-plate aluminum welding, this is critical. In pipe and fitting manufacturing, the same principle applies. When welding a thick-wall aluminum pipe, the weld penetration profile determines the load-bearing capacity and the risk of lack of fusion. A simulation that can predict this profile is a valuable tool for process development, because it allows you to optimize parameters without running hundreds of trial welds.

Practical Considerations

The use of a high-speed camera to measure droplet transfer frequency and velocity is a good example of how experimental data should inform simulation. Too often, simulation models are built on assumptions that are never verified. Here, the authors measured the actual droplet behavior and used it as input to the model. This is the right approach. For production, the practical value of this model is that it can predict the temperature field and the resulting weld shape for a given set of parameters. This allows you to assess the risk of lack of fusion, excessive penetration, or distortion before you ever strike an arc. In my experience, the cost of a simulation study is far less than the cost of a failed production run, especially for thick-wall or high-value components. The model's ability to capture the finger-like penetration is particularly valuable for aluminum, where this feature is pronounced and where lack of fusion is a common defect.

Summary

This paper presents a well-validated combined heat source model for aluminum MIG welding that captures the finger-like penetration characteristic by incorporating the droplet's thermal and kinetic energy. The validation against actual weld morphology is the strongest aspect, and the use of high-speed camera measurements to determine droplet behavior is a model of good practice. For engineers involved in welding thick-wall aluminum components, this model provides a reliable tool for predicting temperature fields and weld shapes, which can be used to optimize process parameters and reduce the risk of defects. The approach is transferable to other materials and processes, and I would recommend it as a reference for anyone setting up a welding simulation capability. The key lesson is that simulation is only as good as its input data, and measuring the actual droplet behavior is essential for a credible model.