ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Nd:YAG Laser-Pulsed MIG Hybrid Brazing-Welding of Copper to Galvanized Steel

Literature Overview and Core Intent

This paper by Lei Zhen, Qin Guoliang, Wang Xuyou and Lin Shangyang from Harbin Welding Institute explores the use of Nd:YAG laser-pulsed MIG hybrid heat source for joining T2 copper alloy to galvanized steel. The copper-steel dissimilar joint is a classic challenge in electrical and heat exchanger manufacturing. Direct fusion welding of copper to steel produces brittle intermetallic compounds at the interface, which destroy joint integrity. The authors propose a hybrid brazing-welding approach where the steel is not melted but the copper is, creating a braze-weld joint that avoids the brittle intermetallic problem.

Technical Points and Joint Characteristics

The process works by directing the laser and MIG arc at the joint such that the steel side remains solid while the copper side melts and wets the steel surface. The galvanized coating on the steel plays a beneficial role by promoting wetting and reducing the formation of brittle phases. The key results are as follows.

Characteristic Observation
Steel base metal Not melted, remains solid
Copper base metal Melted and wets steel surface
Joint type Brazed connection at steel interface
Fracture location Copper heat-affected zone
Fracture mode Ductile fracture
Interface microstructure No steel dissolution, no Cu penetration along ferrite grain boundaries
Element diffusion Cu and Fe atoms diffuse into each other, forming Cu-Fe solid solution
Interface enrichment Si element enrichment observed at braze interface

The absence of steel dissolution and copper penetration along ferrite grain boundaries is a critical finding. This means the braze interface is clean and free of the brittle Fe-Cu intermetallics that typically ruin copper-steel joints. The Cu-Fe solid solution formed at the interface provides good metallurgical bonding. The Si enrichment is likely from the filler wire, which acts as a deoxidizer and improves wettability.

The tensile fracture occurs in the copper heat-affected zone, indicating that the joint strength is limited by the softening of the copper base metal rather than by the braze interface itself. The fracture is ductile, which is reassuring for service reliability.

Engineering Practice and Reflections

This process has direct application in the manufacture of electrical components, heat exchangers, and transition joints where copper must be joined to steel. In my experience, copper-steel joints are traditionally made by brazing with silver-based filler metals, which are expensive and require careful flux control. The laser-MIG hybrid approach offers a faster, more controllable alternative that eliminates the need for flux and produces a cleaner joint.

The practical considerations are significant. The galvanized coating on the steel is essential for the process to work, which limits the application to galvanized steel. If the steel is not galvanized, the wetting behavior will be different and the joint quality may suffer. The heat input must be carefully controlled to avoid melting the steel, which would create brittle intermetallics. The laser power and MIG current must be balanced so that the copper melts but the steel does not. This requires precise process control and a stable heat source.

The Si enrichment at the interface is worth noting. Silicon is a common deoxidizer in copper filler wires, and its presence at the interface suggests that it improves the wetting and bonding. However, excessive silicon can form brittle silicides. The filler wire composition must be optimized for this specific application.

Study Insights and Outlook

The paper demonstrates a viable route to high-quality copper-steel dissimilar joints using hybrid brazing-welding. The joint strength is limited by the copper heat-affected zone, which is acceptable for many applications but could be improved by using a copper alloy with higher softening resistance. The next step should be a systematic study of the process parameters, including laser power, MIG current, welding speed, and filler wire composition, to optimize the joint properties. The industrial application of this process could significantly reduce the cost and improve the reliability of copper-steel transition joints in electrical and thermal management systems. The clean interface and ductile fracture mode are exactly what a design engineer wants to see in a dissimilar metal joint.