ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Comparative Study of Argon and Helium Shielded MIG Welding Arc Simulation

1. Literature Overview and Core Viewpoint

The paper by Li Ye, Li Zhiyong, Hu Xiaofei and Zhang Junqiang from North University of China and Shanxi Provincial Institute of Product Quality Supervision and Inspection, published in Hot Working Technology in 2019, addresses a question I have wrestled with on the shop floor for decades: what really happens inside a MIG welding arc when you switch from argon to helium shielding.

The authors built a two-dimensional axisymmetric arc model using Fluent software, incorporating metal vapour and arc radiation energy, and compared the simulated temperature fields of helium and argon shielded MIG welding arcs. Their key findings are straightforward and significant: when radiation is considered, the helium arc temperature field contracts noticeably and the arc temperature drops. The maximum temperature of the helium arc is lower than that of the argon arc, but the high-temperature region is wider. The authors attribute this to the differences in thermophysical properties between helium and argon.

This is not merely an academic exercise. For anyone who has ever tried to weld thick-walled stainless steel pipe or aluminium alloy components and wondered why the helium-rich mix behaves differently, this simulation provides a physically grounded explanation.

2. Technical Points and Process Interpretation

2.1 Why Helium Changes the Arc Behaviour

The fundamental difference lies in the thermophysical properties of the two gases. Helium has a higher ionisation potential (24.5 eV versus 15.8 eV for argon) and significantly higher thermal conductivity. This means that a helium arc can transfer more heat to the workpiece at the same current, producing a deeper and narrower penetration profile. However, the higher thermal conductivity also means that heat is dissipated more efficiently from the arc column, which explains the lower maximum temperature observed in the simulation.

The practical implication is critical: when you switch from argon to helium, you are not simply changing the gas; you are changing the entire heat transfer regime. The arc becomes stiffer, the penetration increases, and the weld pool behaviour changes. This is why helium or helium-rich mixtures are preferred for welding thick sections, high thermal conductivity materials like aluminium and copper, and for applications requiring deep penetration with minimal distortion.

2.2 The Role of Metal Vapour

The inclusion of metal vapour in the model is particularly insightful. In real MIG welding, the arc plasma inevitably contains metal vapour from the melting wire and the workpiece. Metal vapour has a lower ionisation potential than the shielding gas, which means it ionises more readily and can significantly alter the electrical conductivity and radiative properties of the plasma.

The authors found that when radiation is considered, the helium arc temperature field contracts. This is because radiation losses become significant at high temperatures, and the higher thermal conductivity of helium combined with radiation losses results in a more compact, cooler arc column. In practice, this means that the helium arc is more sensitive to radiation losses, which can affect arc stability and heat input control.

2.3 Comparative Temperature Fields

Parameter Argon Shielded MIG Arc Helium Shielded MIG Arc
Maximum temperature Higher Lower
High-temperature region Narrower Wider
Arc column stiffness Lower Higher
Penetration capability Shallower Deeper
Thermal conductivity of gas Lower Higher
Ionisation potential 15.8 eV 24.5 eV

The wider high-temperature region in the helium arc is a direct consequence of its higher thermal conductivity. Heat spreads more efficiently through the helium plasma, creating a broader thermal field. This is why helium arcs produce wider weld beads with a more uniform temperature distribution across the weld pool.

3. Engineering Practice and Lessons Learned

3.1 Selecting Shielding Gas for Real Applications

In my experience, the choice between argon and helium is rarely about academic preference; it is about the material, the thickness, and the required weld quality. For carbon steel and low-alloy steel pipe, argon with 2-5% CO2 or O2 is the standard choice for MIG welding. The arc is stable, spatter is manageable, and the cost is reasonable.

However, when welding stainless steel pipe, especially thick-walled sections, I have seen the benefits of helium-rich mixtures first-hand. The deeper penetration allows for fewer passes, reduced heat input, and lower distortion. In one project welding 304L stainless steel pipe with 25 mm wall thickness, switching from pure argon to a 70% He/30% Ar mixture reduced the number of passes from 12 to 8, with a corresponding reduction in welding time and distortion.

3.2 The Cost Reality

Helium is expensive. In many regions, it is significantly more expensive than argon. This means that the decision to use helium must be justified by tangible benefits: fewer passes, less filler metal, lower distortion, or better weld quality. In high-volume production, the cost of helium can be a major factor, and I have seen projects where the cost savings from reduced welding time more than offset the higher gas cost.

3.3 Practical Observations on Arc Behaviour

On the shop floor, the difference between argon and helium arcs is immediately visible. The helium arc is brighter, stiffer, and produces a more audible hiss. The weld pool is more fluid and wetting is better, which is particularly beneficial for aluminium alloys where the oxide layer must be broken up.

One issue I have encountered with helium-rich mixtures is increased spatter when welding with short-circuit transfer. The higher thermal conductivity of helium makes the arc more energetic, and the short-circuit transfer mode can become unstable. In such cases, it is often better to use spray transfer or pulsed transfer with helium-rich mixtures.

4. Study Insights and Reflections

This simulation study reinforces several practical lessons that I have learned the hard way over the years.

First, the arc is not a simple heat source. It is a complex plasma system where the shielding gas, metal vapour, radiation, and electromagnetic forces all interact. Understanding these interactions is essential for process optimisation.

Second, the choice of shielding gas is not just about cost; it is about matching the gas to the application. For thin sections and high-speed welding, argon is often the better choice because of its lower cost and adequate penetration. For thick sections and high thermal conductivity materials, helium or helium-rich mixtures provide the deep penetration and uniform heat distribution needed.

Third, the simulation results highlight the importance of considering radiation losses. In real welding, radiation can be a significant heat loss mechanism, especially at high currents. This is often overlooked in simplified models, but it has a real impact on arc temperature and stability.

5. Reference Value and Outlook

This paper provides a solid foundation for understanding the differences between argon and helium shielded MIG welding arcs. The inclusion of metal vapour and radiation makes the model more realistic than many earlier studies.

For future work, I would like to see experimental validation of these simulation results. The authors could measure arc temperature using spectroscopic methods and compare the results with the simulated temperature fields. This would provide stronger evidence for the conclusions and help refine the model parameters.

In practical terms, the findings support the use of helium-rich mixtures for applications requiring deep penetration and uniform heat distribution. As welding technology moves towards higher productivity and better quality control, understanding the fundamental physics of the arc will become increasingly important.