ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

MIG Welding of AZ91D Magnesium Alloy with Aluminum-Based Filler Wires

Literature Overview

This study from North University of China investigates the weldability of AZ91D magnesium alloy using aluminum-based filler wires (S301 and ER5356) in MIG welding. AZ91D is the most widely used magnesium alloy, finding applications in automotive, aerospace, and electronics industries due to its excellent strength-to-weight ratio. However, welding of magnesium alloys presents significant challenges, particularly the formation of brittle intermetallic compounds in the weld metal. The study explores the use of aluminum-based filler wires and the effect of zinc addition on the weld microstructure and mechanical properties.

Core Technical Points

Weldability with Aluminum-Based Filler Wires

The study demonstrates that both S301 (φ1.2 mm) and ER5356 (φ1.6 mm) aluminum-based filler wires can produce effective welds in AZ91D magnesium alloy within their respective welding parameter ranges. However, the weld metal contains significant amounts of Mg17Al12 brittle intermetallic phase, which severely degrades the mechanical properties of the weld. The relative content of Mg-based solid solution and Mg-Al brittle phase is directly related to the local Mg and Al concentrations in the weld.

Effect of Zinc Addition

The study found that adding zinc to the weld through a zinc foil interlayer significantly reduces the Mg17Al12 phase content and promotes the formation of MgZn2 new phase. The zinc addition also promotes the growth of Mg-based solid solution, leading to improved overall mechanical properties of the weld. This is a significant finding because it provides a practical method to improve the weldability of magnesium alloys with aluminum-based filler wires.

Microstructural Evolution

Phase Without Zn Addition With Zn Addition
Mg17Al12 Abundant, brittle Significantly reduced
MgZn2 Not present Newly formed
Mg Solid Solution Limited growth Enhanced growth
Mechanical Properties Poor Improved

Process and Standards Analysis

Magnesium Alloy Welding Challenges

Magnesium alloys present unique welding challenges:

  1. High thermal conductivity and low melting point make them susceptible to burn-through.
  2. High coefficient of thermal expansion leads to significant distortion.
  3. Magnesium readily oxidizes, requiring effective shielding gas coverage.
  4. The formation of brittle intermetallic compounds in the weld metal is a major concern.
  5. Hydrogen solubility in magnesium is high, leading to porosity.

Filler Wire Selection

The choice of filler wire is critical for magnesium alloy welding. Aluminum-based filler wires are commonly used because they provide good weldability and acceptable mechanical properties. However, the formation of Mg17Al12 phase is a concern. The study's finding that zinc addition can reduce this phase provides a new approach to filler wire design.

Integration with Engineering Practice

Practical Implications for Magnesium Alloy Components

Magnesium alloy components are increasingly used in automotive and aerospace applications where weight reduction is critical. However, welding of magnesium alloys is challenging, and the industry often relies on mechanical fastening or adhesive bonding instead of welding. This study provides valuable data for the development of welding procedures for magnesium alloy components.

Quality Control and Defect Prevention

The presence of brittle intermetallic compounds in magnesium alloy welds is a serious concern for structural integrity. In practice, welded magnesium components should be inspected using radiographic testing (RT) or ultrasonic testing (UT) to detect internal defects. The mechanical properties of the weld should be verified through tensile testing and bend testing. The study's finding that zinc addition improves weld properties suggests that the filler wire composition should be carefully controlled.

Welding Procedure Qualification

For magnesium alloy welding, the welding procedure qualification (WPQ) must include mechanical testing of the weld joint. The study's data on weld metal microstructure and mechanical properties provides a baseline for WPQ. The welding parameters must be carefully controlled to ensure consistent weld quality, particularly the heat input, which affects the formation of intermetallic compounds.

Key Questions and Reflections

The study raises an important question about the industrial applicability of the zinc foil interlayer approach. While the laboratory results are promising, the practical implementation of adding a zinc foil interlayer in production welding is challenging. The zinc foil must be precisely positioned in the joint, and the welding parameters must be adjusted to ensure complete melting and mixing of the zinc with the weld metal.

Another reflection: the study used two different filler wire diameters (1.2 mm and 1.6 mm), which introduces a variable that is not fully explored. The wire diameter affects the heat input and the dilution ratio, which in turn affect the weld metal composition and microstructure. A more systematic study would use the same wire diameter for both filler wires.

Study Insights and Implications

This study provides valuable insights into the welding of AZ91D magnesium alloy with aluminum-based filler wires. The key findings are:

  1. Both S301 and ER5356 aluminum-based filler wires can produce effective welds in AZ91D alloy.
  2. The weld metal contains significant amounts of Mg17Al12 brittle phase, which degrades mechanical properties.
  3. Zinc addition reduces Mg17Al12 phase and promotes MgZn2 phase formation, improving weld properties.
  4. The relative content of Mg solid solution and Mg-Al brittle phase is related to local Mg and Al concentrations.

Reference Value and Outlook

This study has direct reference value for welding engineers working with magnesium alloy components. The finding that zinc addition improves weld properties provides a new approach to filler wire design for magnesium alloys. Future research could investigate the optimal zinc content, the effect of zinc on corrosion resistance, and the development of new filler wire compositions that incorporate zinc.

In my experience with welding difficult materials, the key is to understand the metallurgical reactions that occur during welding. The formation of brittle intermetallic compounds is a common challenge in dissimilar metal welding and in welding of alloys with complex phase diagrams. This study demonstrates that careful alloy design can mitigate these challenges, but the practical implementation requires careful process control and quality assurance.