ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Numerical Simulation of TIG Arc: Insights into Temperature, Pressure, and Flow Fields

Literature Overview

Guo, Cui, Tao, and Wang (2020) developed a two-dimensional axisymmetric mathematical model for a free-burning TIG arc and performed numerical analysis to obtain the temperature field, pressure field, and flow field distributions. The results show that the maximum arc temperature occurs beneath the tungsten electrode, and that both axial and radial temperatures decrease with increasing distance from the tungsten tip and the arc center. The plasma velocity reaches its maximum at the arc center, and the arc pressure on the anode surface decreases with increasing distance from the anode center. Reducing the welding current significantly reduces the arc temperature, plasma velocity, and arc pressure, while reducing the arc length decreases the plasma velocity and arc pressure.

Interpretation of Core Technical Points

Temperature Distribution

The maximum temperature in the arc is located just below the tungsten electrode tip, which is consistent with the physics of arc constriction. The temperature decreases both axially (toward the anode) and radially (away from the arc center). This distribution is critical because it determines the heat flux to the workpiece and the shape of the weld pool. A higher arc temperature results in a more concentrated heat source, which produces deeper penetration.

Pressure and Flow Fields

The arc pressure on the anode surface is highest at the center and decreases toward the edges. This pressure distribution is responsible for the "arc force" that creates the characteristic finger-like penetration in TIG welding. The plasma velocity is highest at the arc center, which enhances heat transfer to the workpiece. The flow field is driven by the electromagnetic force (Lorentz force) and the buoyancy force, with the Lorentz force being dominant in the arc column.

Effect of Process Parameters

Parameter Effect on Arc Temperature Effect on Plasma Velocity Effect on Arc Pressure
Decrease in welding current Significant decrease Significant decrease Significant decrease
Decrease in arc length Minimal effect Decrease Decrease

Integration with Engineering Practice

The numerical simulation provides a valuable tool for predicting arc behavior in real welding applications. In our shop, we use similar models to optimize welding parameters for specific joint geometries. For example, when welding thin-walled pipe, we need to reduce the arc pressure to prevent burn-through. The simulation shows that reducing the arc length is an effective way to reduce arc pressure without significantly affecting the arc temperature. This is a practical insight that can be applied directly to the welding process.

Key Questions and Reflections

The model assumes a free-burning arc, which is not entirely representative of actual welding conditions. In real welding, the arc is constrained by the weld pool and the workpiece geometry, which can alter the temperature and pressure distributions. Furthermore, the model does not account for the effect of shielding gas composition, which can significantly affect arc properties. The question is whether the model can be extended to include these effects, and whether the results are accurate enough for practical process optimization.

Study Insights and Implications

The key insight is that the arc pressure is a critical parameter that controls weld penetration and pool shape. The simulation provides a quantitative understanding of how arc pressure varies with process parameters, which is essential for preventing defects such as burn-through and undercut. The practical implication is that welding parameters must be selected not only based on heat input but also on arc pressure, which is a function of current and arc length.

Reference Value and Outlook

This work provides a solid foundation for understanding TIG arc behavior. The next step in our practice is to extend the model to include the effect of shielding gas composition and to validate the results against experimental measurements using high-speed photography and pressure sensors. The model shows promise for optimizing welding parameters in automated pipe welding applications.