Development of a Lifting Arc Starting Device for DC TIG Welding
Literature Overview and Core Findings
The paper by Chen Yucheng and Xu Delu from the Electric Power Construction Research Institute of the State Power Corporation describes the development of an external lifting arc starting device for DC TIG welding. The device is designed to provide a simple, flexible, and external means of starting the arc without the need for high-frequency or high-voltage ignition. The key advantage of this device is that it avoids the contamination and tungsten inclusion problems associated with contact starting methods, while providing reliable arc initiation. The device was tested on a ZST-300 inverter power source and achieved good results.
Background and Arc Starting Challenges
Arc starting in TIG welding is a critical process step that affects weld quality and electrode life. There are several methods for starting the arc: high-frequency ignition, high-voltage spark ignition, and contact starting. High-frequency ignition is the most common method, but it can cause electromagnetic interference with nearby electronic equipment and can be dangerous in explosive atmospheres. High-voltage spark ignition is similar but has a higher risk of electric shock. Contact starting involves touching the electrode to the workpiece and then lifting it to establish the arc, but this can cause contamination of the electrode and tungsten inclusions in the weld.
The lifting arc starting method is a variation of contact starting. The electrode is touched to the workpiece, and then a lifting mechanism raises the electrode to establish the arc. This method is simple and reliable, but it requires a mechanism to lift the electrode in a controlled manner. The device described in this paper is an external device that can be attached to a standard TIG torch, providing lifting arc starting without modifying the torch or the power source.
In my experience with pipe welding, arc starting is a frequent source of weld defects. Tungsten inclusions are a common defect in TIG welding, and they are typically caused by the electrode touching the molten pool or the workpiece during arc starting. The lifting arc starting device addresses this problem by providing a controlled lifting motion that establishes the arc without the electrode touching the workpiece for an extended period.
Device Design and Operation
The device is an external attachment that fits over the TIG torch. It consists of a mechanical lifting mechanism that raises the electrode from the workpiece after initial contact. The device is designed to be simple and easy to use, with a manual or automatic lifting action. The key design requirements are: the lifting distance must be sufficient to establish a stable arc (typically 2 to 3 mm); the lifting speed must be controlled to avoid arc instability; and the device must be robust enough to withstand the heat and mechanical forces of welding.
The device was tested on a ZST-300 inverter power source, which is a common type of welding power supply. The test results showed that the device provided reliable arc starting without contamination or tungsten inclusion. The arc was stable and the weld quality was good. The device is particularly useful for field welding, where high-frequency ignition may cause interference with other equipment or may not be available.
From my experience, the lifting arc starting method is particularly valuable for pipe welding in confined spaces, such as inside a vessel or in a pipe rack. In these situations, high-frequency ignition can cause interference with nearby electronic controls, and the lifting arc starting device provides a safe and reliable alternative. The device is also useful for welding in explosive atmospheres, where high-frequency ignition is prohibited.
Practical Implications and Field Experience
The practical implications of this work are significant for pipe welding in the power generation, petrochemical, and shipbuilding industries. The lifting arc starting device provides a simple and reliable method for starting the TIG arc without the need for high-frequency or high-voltage ignition. This is particularly important for field welding, where the welding power source may not have high-frequency ignition capability, or where high-frequency ignition may cause interference with other equipment.
In my experience, the most common problem with TIG arc starting is tungsten inclusion. This occurs when the electrode touches the workpiece and the tungsten is transferred to the weld pool. The lifting arc starting device minimizes this risk by providing a controlled lifting motion that establishes the arc quickly. The device also reduces the risk of contamination from the electrode, which is important for welding materials that are sensitive to contamination, such as titanium and zirconium.
The device is also useful for welding in difficult positions, such as overhead or vertical-up welding. In these positions, the welder may have difficulty controlling the arc starting, and the lifting arc starting device provides a consistent and reliable method. The device can be used with any standard TIG torch, which makes it a versatile tool for the welding shop.
One concern I have with the lifting arc starting device is the potential for electrode damage. If the electrode is touched to the workpiece with too much force, the tip may be damaged, and the damaged electrode will produce an unstable arc. The device must be designed to limit the contact force and to provide a controlled lifting motion. The electrode must also be properly prepared, with a sharp point and the correct tip angle, to ensure reliable arc starting.
Study Insights and Engineering Judgment
This paper provides a practical solution to a common problem in TIG welding. The lifting arc starting device is simple, reliable, and versatile, and it addresses the key issues of contamination and tungsten inclusion. The device is particularly useful for field welding and for welding in confined spaces or explosive atmospheres.
One question I would raise is about the durability of the device. The device is exposed to heat, spatter, and mechanical forces during welding, and it must be robust enough to withstand these conditions. The device should be made of heat-resistant materials and should be designed for easy maintenance and replacement of worn parts.
Another consideration is the effect of the lifting arc starting device on weld quality. The arc starting process can affect the weld quality, particularly at the start of the weld. The device must provide a stable arc that does not cause spatter or porosity at the start of the weld. The test results in the paper show good weld quality, but the device should be qualified for the specific welding applications in which it will be used.
Concluding Remarks
The lifting arc starting device for DC TIG welding is a practical and valuable tool for the welding industry. It provides a simple and reliable method for starting the arc without the need for high-frequency or high-voltage ignition, and it avoids the contamination and tungsten inclusion problems associated with contact starting. The device is particularly useful for field welding, welding in confined spaces, and welding in explosive atmospheres. The device was tested on a ZST-300 inverter power source and achieved good results. For pipe welding, the device offers a significant improvement in arc starting reliability and weld quality. I would recommend that welding shops consider the lifting arc starting device as a standard tool for TIG welding, and that they qualify the device for their specific applications.
Zhuojin Pipe Fitting Co., Ltd