ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Effect of CO2 Laser on DC TIG Arc Temperature

Introduction and Research Context

Laser-arc hybrid welding has been a hot topic for over two decades, and for good reason. The laser provides deep penetration and high welding speed, while the arc provides gap tolerance and filler metal addition. The combination can produce welds that neither process can achieve alone. However, the physics of the interaction between the laser beam and the arc plasma is complex and not fully understood. The paper by Wu Shikai and Xiao Rongshi from Beijing University of Technology addresses one specific aspect of this interaction: the effect of a CO2 laser beam on the temperature distribution of a DC TIG arc.

This is fundamental research, but it has direct practical implications. If we understand how the laser affects the arc temperature, we can better predict the weld pool geometry, the heat-affected zone size, and the resulting mechanical properties of the joint. The authors used spectroscopic analysis and the Boltzmann plot method to measure the electron temperature of the arc plasma before and after laser interaction.

Experimental Methodology

The experimental setup consisted of a CO2 laser beam passing vertically through a DC TIG arc. The authors measured the spectral characteristics of the arc plasma at multiple locations along the arc axis, both with and without laser irradiation. They used the Boltzmann plot method, which is a well-established spectroscopic technique for determining plasma temperature from the relative intensities of spectral lines.

The key experimental parameters were:

Parameter Value
Laser type CO2, continuous wave
Laser power Variable, specific values not disclosed in abstract
Arc type DC TIG
Shielding gas Argon
Measurement method Optical emission spectroscopy
Temperature calculation Boltzmann plot method
Measurement locations Multiple points along arc axis from cathode to anode

The authors measured the arc temperature before and after laser interaction, and also at different laser interaction positions along the arc axis.

Key Findings and Interpretation

The results revealed several important phenomena:

  1. The spectral characteristics of the arc plasma remained essentially unchanged after laser interaction. This means that the laser does not significantly alter the excitation and ionization processes in the plasma, at least not in terms of the types of species present.
  2. The overall radiation intensity increased after laser interaction. This indicates an increase in plasma density or temperature, or both. The authors attribute this to the absorption of laser energy by the plasma through inverse bremsstrahlung.
  3. The arc temperature increased from the laser interaction point toward the anode, while the temperature near the cathode remained essentially unchanged. This is a critical finding because it shows that the laser energy is absorbed primarily in the region between the laser interaction point and the anode.
  4. When the laser was applied at different positions along the arc axis, the temperature at the interaction point was approximately the same. This suggests that the plasma provides only the initial electrons for the interaction, while the laser beam itself is the dominant factor determining the resulting temperature.

Practical Implications for Welding

These findings have several practical implications for laser-arc hybrid welding:

Heat Input Distribution

The fact that the laser increases the arc temperature primarily in the anode region means that more heat is delivered to the workpiece. This can be beneficial for increasing penetration depth, but it also means that the heat-affected zone will be larger and the cooling rate will be slower. For steels, this can affect the microstructure and mechanical properties of the weld. For materials with low thermal conductivity, such as titanium alloys, the increased heat input can cause excessive grain growth and degradation of mechanical properties.

Process Control

The finding that the laser power is the dominant factor in determining the arc temperature suggests that process control should focus on laser power rather than arc current when trying to control weld penetration. This is a useful insight for process engineers who are trying to optimize hybrid welding parameters.

Arc Stability

The fact that the spectral characteristics remain unchanged suggests that the arc remains stable even with laser irradiation. This is important for industrial applications, where arc instability can cause weld defects such as lack of fusion, porosity, and spatter.

Comparison with Conventional TIG Welding

To put this in perspective, let me compare the implications for conventional TIG welding versus laser-arc hybrid welding:

Aspect Conventional TIG Laser-arc Hybrid
Heat input distribution Uniform along arc axis Concentrated near anode
Penetration depth Limited by arc current Enhanced by laser
HAZ width Moderate Potentially larger
Cooling rate Moderate Slower near anode
Process stability Good Good, with proper parameter control
Gap tolerance Good Reduced compared to pure TIG

The key takeaway is that laser-arc hybrid welding offers advantages in penetration depth and welding speed, but requires careful control of the heat input to avoid excessive HAZ growth and degradation of mechanical properties.

Lessons for the Shop Floor

From my experience in the pipe and pressure vessel industry, I can offer a few practical observations:

First, laser-arc hybrid welding is not a drop-in replacement for conventional TIG or SAW. It requires a different mindset in terms of process control and quality assurance. The heat input is more concentrated, which means that the weld pool is smaller and more sensitive to variations in parameters.

Second, the interaction between the laser and the arc is complex and depends on many factors, including laser power, arc current, shielding gas composition, and the distance between the laser focus point and the arc. This paper provides valuable data on one aspect of this interaction, but there is still much to learn about the combined effects.

Third, for high-quality applications such as pipeline welding and pressure vessel fabrication, the benefits of hybrid welding must be weighed against the increased complexity of the equipment and the need for more sophisticated process monitoring and control.

Conclusion

This paper makes a valuable contribution to our understanding of laser-arc interaction in hybrid welding. The finding that the laser increases the arc temperature primarily in the anode region, while leaving the cathode region relatively unaffected, is important for predicting weld pool geometry and heat-affected zone characteristics. The observation that the laser power, rather than the arc current, is the dominant factor in determining the post-interaction arc temperature provides useful guidance for process control. For engineers working on laser-arc hybrid welding applications, this research offers a solid foundation for understanding the physics of the process and for developing robust process control strategies.