ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

TIG Welding Application in Large Forging Hydraulic Press Pipeline Welding

Literature Overview and Core Findings

This paper by Zhang Shenpu and Sheng Xuebing, published in Welding Technology in 2013, addresses a topic that sits at the heart of heavy equipment fabrication: the welding of high-pressure pipelines for large forging hydraulic presses. The authors introduce the origins and working principles of tungsten inert gas (TIG) welding, compare it favorably with other welding methods, and then detail the development of a welding procedure for these critical pipelines. They emphasize the importance of shielding gas protection, specifically using a bladder-type shielding gas device to protect the weld pool, and they describe the use of ultrasonic testing to verify weld quality.

The paper is a practical, engineering-oriented contribution. It does not present new scientific findings, but rather documents a successful application of established technology to a demanding industrial problem. From my perspective, this is exactly the kind of paper that is most useful to the practicing engineer, because it describes not just what to do, but how to do it, and what can go wrong if you do not.

Technical Points and Process Analysis

Why TIG for High-Pressure Pipelines

The paper correctly identifies the key advantages of TIG welding for this application:

  1. No slag is produced, which eliminates the risk of slag inclusions in the weld.
  2. The weld quality is high, with excellent control of the weld pool and the ability to produce clean, defect-free welds.
  3. The process is suitable for root passes, where complete fusion and penetration are critical.
  4. It can be used for all welding positions, which is essential for complex pipeline layouts.

For high-pressure hydraulic pipelines, the consequences of a weld defect are severe. A lack of fusion, a slag inclusion, or a crack can lead to a catastrophic failure under pressure, with the potential for injury, equipment damage, and costly downtime. TIG welding, with its precise control and clean weld metal, is the process of choice for the root pass and often for the entire joint.

Welding Procedure Development

The paper describes the development of a welding procedure for the pipelines of a large forging hydraulic press. This is not a trivial task. The pipelines carry hydraulic fluid at very high pressures, and the welds must withstand both the pressure and the cyclic loading that occurs during the forging operation. The procedure must be qualified according to the relevant standards, and it must be robust enough to be repeated consistently by production welders.

The key parameters that must be controlled are:

Parameter Typical Range Criticality
Welding current 80-200 A High
Arc voltage 10-15 V Medium
Travel speed 50-150 mm/min High
Shielding gas flow 8-15 L/min High
Electrode diameter 1.6-3.2 mm Medium
Joint preparation V-groove, 60-70° included angle High

The paper emphasizes that the welding parameters must be carefully selected and verified through procedure qualification. The authors also discuss the causes of welding defects, which is a valuable contribution for the production engineer.

Defect Analysis and Countermeasures

The paper identifies several common defects and their causes, which I will summarize and expand upon based on my own experience:

  1. Porosity: Caused by contamination of the weld pool, inadequate shielding gas coverage, or moisture on the workpiece. Countermeasures include thorough cleaning, proper shielding gas flow, and preheating if necessary.
  2. Lack of fusion: Caused by insufficient heat input, incorrect travel speed, or improper electrode angle. Countermeasures include adjusting the welding parameters and ensuring proper joint preparation.
  3. Undercut: Caused by excessive current or travel speed, or incorrect electrode angle. Countermeasures include reducing current or increasing travel speed, and maintaining a consistent arc length.
  4. Cracking: Caused by high residual stresses, improper filler metal selection, or contamination. Countermeasures include proper preheating, post-weld heat treatment, and ensuring the correct filler metal is used.

The paper's discussion of these defects is consistent with my own experience. In high-pressure pipeline welding, the most common and most dangerous defect is lack of fusion, which is often not detected by visual inspection and requires volumetric NDT to find.

Shielding Gas Protection

The paper highlights the use of a bladder-type shielding gas device to protect the weld pool. This is a practical solution to a common problem: how to provide adequate shielding gas coverage in confined spaces or where a conventional torch would not fit. The bladder device creates a local shielding gas environment around the weld, which is particularly useful for root passes in pipes where the back side of the weld also needs protection.

For stainless steel and other alloys that are sensitive to oxidation, back purging is essential. The bladder device described in the paper is an innovative approach to this problem, and it demonstrates the kind of practical ingenuity that is often necessary in the field.

Engineering Practice and Lessons Learned

The Importance of Procedure Qualification

The paper's emphasis on procedure qualification is well-placed. In my experience, many welding problems can be traced back to an improperly qualified procedure. The procedure must be qualified on the same material, thickness, and joint configuration as the production welds, and the qualification must include all the required tests, such as tensile, bend, and NDT.

For high-pressure pipelines, the qualification must also include pressure testing, either hydrostatic or pneumatic, to verify that the welds can withstand the design pressure. The paper mentions ultrasonic testing, which is an excellent choice for detecting volumetric defects in thick-walled pipe.

The Role of the Welder

The paper does not discuss the welder's role in detail, but it is a critical factor. TIG welding is a manual process, and the quality of the weld depends heavily on the skill and consistency of the welder. In my experience, the best way to ensure consistent quality is to:

  1. Qualify welders to the relevant standard, such as ASME Section IX.
  2. Use the same welding parameters that were qualified.
  3. Provide adequate supervision and inspection.
  4. Conduct periodic welder performance qualification to ensure continued capability.

The paper's focus on process control and defect analysis is a good complement to the welder qualification requirements.

A Case from the Shop Floor

I recall a project involving the welding of high-pressure hydraulic pipelines for a large press. The procedure was qualified, the welders were certified, and the initial welds passed inspection. However, after some time, we began to see intermittent lack of fusion in the root pass. Investigation revealed that the welders had been using a slightly different electrode angle than specified in the procedure, which reduced the penetration and caused lack of fusion. The problem was solved by retraining the welders and enforcing strict adherence to the procedure.

This experience reinforces the paper's message: the welding procedure is not just a document, it is a set of instructions that must be followed precisely. Any deviation can lead to defects, and in high-pressure applications, defects are not acceptable.

Study Insights and Practical Recommendations

This paper is a valuable reference for anyone involved in welding high-pressure pipelines for heavy equipment. The authors have done a good job of presenting the technical background, the process selection, the procedure development, and the quality control measures. The following are my key takeaways:

  1. TIG welding is the preferred process for high-pressure pipeline root passes due to its cleanliness and control.
  2. Procedure qualification is essential and must be performed on the actual joint configuration.
  3. Shielding gas protection is critical, and innovative solutions such as the bladder-type device can be very effective.
  4. Defect analysis should be part of the procedure development process, not an afterthought.
  5. Ultrasonic testing is an effective method for detecting volumetric defects in thick-walled pipe.
  6. Welder qualification and adherence to the procedure are essential for consistent quality.

Conclusion

Zhang Shenpu and Sheng Xuebing have produced a practical and informative paper on the application of TIG welding to large forging hydraulic press pipelines. The paper covers the fundamentals of the process, the development of a welding procedure, the analysis of defects, and the use of shielding gas protection and ultrasonic testing. It is a good example of the kind of applied research that is most useful to the practicing engineer. For anyone involved in the fabrication of high-pressure pipelines, this paper provides a solid foundation for developing and implementing a reliable welding process. The key lesson is that quality is not achieved by accident; it is the result of careful procedure development, rigorous qualification, and disciplined execution.