Effect of Longitudinal Magnetic Field on Mechanical Properties of Magnesium Alloy Welded Joints
Overview of Magnetic Field Assisted Welding
Magnesium alloys are notoriously difficult to weld because of their low melting point, high thermal conductivity, and the tendency for the weld pool to collapse and form porosity. This paper from Shenyang University of Technology explores an innovative approach: applying a longitudinal alternating magnetic field during tungsten inert gas welding of AZ31 magnesium alloy. The idea is that the magnetic field interacts with the arc plasma and the molten pool, causing electromagnetic stirring that refines the grain structure and improves the weld formation. This is a well-known concept in the welding literature, and I have seen it applied in the production of some high-quality steel welds, but its application to magnesium alloys is less common and this paper provides a useful data set.
Effect on Weld Formation and Grain Refinement
The paper reports that the longitudinal AC magnetic field changes the motion state of the arc and the molten pool, which alters the heat dissipation and solidification conditions. The result is an increase in the weld formation coefficient, which is a measure of the weld bead geometry, and a refinement of the weld microstructure. Grain refinement is the key beneficial effect, because finer grains in the weld metal generally lead to higher strength and better ductility, as well as improved resistance to hot cracking. The magnetic field induces convection in the molten pool, which breaks up the growing dendrites and provides more nucleation sites for new grains. This is a classic example of how external fields can be used to control solidification, and it is a technique that I have seen applied in the casting industry for many years.
| Magnetic Field Current (A) | Frequency (Hz) | Tensile Strength (MPa) | Elongation (%) | Reduction of Area (%) | Hardness (HV) | Formation Coefficient |
|---|---|---|---|---|---|---|
| 2.0 | 20 | 231 | 11.5 | 14.8 | 14.40 | 4.06 |
| Other conditions | Varies | Lower | Lower | Lower | Lower | Lower |
The optimal parameters are a magnetic field current of 2.0 A and a frequency of 20 Hz, which produce a tensile strength of 231 MPa, an elongation of 11.5%, a reduction of area of 14.8%, a hardness of 14.40 HV, and a weld formation coefficient of 4.06. The strength-to-hardness ratio of 16.04 is also reported. These are respectable values for a magnesium alloy weld, and they demonstrate that the magnetic field can improve the mechanical properties of the joint significantly compared to conventional GTAW without a magnetic field.
Mechanical Property Optimization and Process Window
The optimization of the magnetic field parameters is critical, because the effect is not monotonic. Too low a magnetic field current produces insufficient stirring, and too high a current can cause turbulence in the molten pool, leading to porosity or weld bead irregularities. Similarly, the frequency must be matched to the solidification rate of the weld pool. The paper identifies a clear optimum at 2.0 A and 20 Hz, which is a useful data point for anyone trying to implement this process on a production line. However, I would caution that the optimal parameters are likely to be specific to the weld geometry, the base metal thickness, and the welding speed, so a process window must be established for each application.
Engineering Practice and Lessons Learned
From a production standpoint, the application of a magnetic field during GTAW adds complexity to the welding process. You need a magnetic coil, a power supply, and a control system, and you need to ensure that the magnetic field is properly aligned with the weld joint. The benefit is improved weld quality, but the cost is additional equipment and process control. In my experience, this type of process is most suitable for high-value components where weld quality is critical and where the added cost is justified. For example, in the aerospace industry or in the fabrication of specialized pressure vessels, the improved mechanical properties might be worth the extra complexity. In the pipe and fitting industry, where production volumes are high and cost pressures are significant, the economics are less favorable, but there may be niche applications where the process is beneficial.
Concluding Remarks
This paper provides a solid experimental basis for the use of longitudinal magnetic fields to improve the mechanical properties of magnesium alloy welds. The grain refinement effect is the key mechanism, and the optimal parameters of 2.0 A and 20 Hz are a useful starting point for process development. The practical challenge is implementing the magnetic field system on a production line, but the potential benefits in terms of joint strength and ductility are significant. For engineers working with magnesium alloys, this is a technique worth considering, particularly for applications where weld quality is critical. I would also note that the same principle can be applied to other materials, and I have seen magnetic field assisted welding used for aluminum alloys and even for some steels, with similar grain refinement effects.
Zhuojin Pipe Fitting Co., Ltd