Self-Centering Steel Tube Concrete Column Base with Pre-Compressed Disc Springs
1. Literature Overview and Research Background
This paper by Men Jinjie, Cen Peng, Guo Mengqiang, Ma Dongfu, and Miao Zewei from Xi'an University of Architecture and Technology presents a novel self-centering column base for steel tube concrete columns. The research was funded by the National Natural Science Foundation of China (52178160, 51878542) and published in the Journal of Civil Engineering (土木工程学报), Volume 58, Issue 12, 2025, pages 67-81.
The concept of self-centering structures has gained significant attention in recent years as a means to reduce residual deformation after earthquakes and enable rapid recovery of building functionality. The proposed column base combines pre-compressed disc springs for self-centering capability with buckling-restrained energy dissipation plates for energy absorption. This dual-function approach is elegant and practical.
From my experience in the industry, I have seen the devastating effects of residual deformation after major earthquakes. Buildings that survive a seismic event but are left with significant permanent drift often require demolition or extensive repair, even if the structural members themselves are not severely damaged. Self-centering systems address this fundamental issue by returning the structure to its original position after the earthquake.
2. Core Technical Findings and Interpretation
2.1 Restoring Force Model
The authors developed a restoring force model that encompasses six loading and unloading stages, based on the mechanical analysis of the column base. The model accounts for the contributions of the pre-compressed disc springs, the buckling-restrained energy dissipation plates, and the interaction between them.
The six-stage model is comprehensive and captures the key behavioral characteristics:
- Elastic loading stage
- Yielding of energy dissipation plates
- Gap opening at the column base
- Unloading with residual deformation
- Self-centering phase
- Re-compression and closure of the gap
2.2 Experimental Results
Five full-scale column base specimens were designed and fabricated for quasi-static testing. The key design parameter was the "bending moment contribution ratio" (抗弯贡献比), which represents the ratio of the moment capacity provided by the self-centering system to the total moment capacity. The test parameters included axial compression ratio and initial disc spring pre-compression force.
The experimental results are remarkable:
| Parameter | Result |
|---|---|
| Bending moment contribution ratio ≥ 1.60 | Hysteresis curve exhibits "double flag" shape |
| Residual deformation at 2.00% drift angle | Less than 0.20% |
| Plastic deformation at 3.00% drift angle | Confined to buckling-restrained energy dissipation plates only |
| Recommended upper limit for bending moment contribution ratio | 1.85 |
The "double flag" hysteresis shape is the hathe writing systemark of self-centering systems. It indicates that the system returns to its original position with minimal residual deformation, while still dissipating energy through the energy dissipation plates.
2.3 Effect of Design Parameters
Increasing the axial compression ratio and the initial disc spring pre-compression force both increase the stiffness, load capacity, and self-centering capability of the column base, but at the cost of reduced energy dissipation capacity. This trade-off is fundamental to self-centering systems and must be carefully balanced in design.
The recommended upper limit of 1.85 for the bending moment contribution ratio provides a practical guideline for achieving an optimal balance between self-centering capability and energy dissipation efficiency.
3. Engineering Practice Considerations
3.1 Fabrication and Assembly
The fabrication of this column base requires precision manufacturing of the disc spring stacks, the buckling-restrained energy dissipation plates, and the connection hardware. The disc springs must be pre-compressed to the specified level, which requires calibrated loading equipment and careful measurement.
The buckling-restrained energy dissipation plates are typically made from low-yield-strength steel, such as LYP100 or LYP160, which has excellent energy dissipation characteristics. The plates are encased in a buckling-restraining mechanism, typically a steel tube filled with mortar or a pair of stiffened plates, to prevent out-of-plane buckling.
3.2 Installation and Replaceability
One of the key advantages of this system is the replaceability of the energy dissipation plates. After a major earthquake, the plates can be removed and replaced without affecting the structural integrity of the column base. This enables rapid recovery of building functionality, which is a critical requirement for essential facilities such as hospitals, emergency response centers, and communication hubs.
3.3 Quality Control
The quality control requirements for this column base include:
- Verification of disc spring pre-compression force
- Tensile testing of energy dissipation plate material
- Dimensional verification of all components
- Load testing of the assembled column base
4. Study Insights and Reflection
This paper makes a significant contribution to the field of self-centering structures by proposing a practical and effective column base design. The combination of disc springs for self-centering and buckling-restrained plates for energy dissipation is a well-conceived approach that addresses the two fundamental requirements of seismic design: drift control and energy absorption.
The experimental validation through five full-scale specimens is particularly valuable. The results confirm that the system achieves the intended self-centering behavior, with residual deformation of less than 0.20% at 2.00% drift angle. This is an excellent performance that would meet the requirements of most seismic design codes.
The restoring force model, which includes six loading and unloading stages, provides a solid foundation for analytical modeling of structures incorporating this column base. The model can be implemented in nonlinear dynamic analysis software to predict the seismic response of complete structures.
5. Conclusion and Outlook
The proposed self-centering steel tube concrete column base with pre-compressed disc springs represents a significant advancement in seismic-resistant structural design. The system achieves excellent self-centering capability, with residual deformation of less than 0.20% at 2.00% drift angle, while providing effective energy dissipation through replaceable buckling-restrained plates. The recommended bending moment contribution ratio of 1.60 to 1.85 provides a practical design window for achieving optimal performance. The restoring force model accurately predicts the behavior of the column base and can be used for structural analysis. Future research should focus on long-term performance, including the effects of creep and relaxation in the disc springs, as well as the development of design provisions for incorporation into building codes. The replaceability of the energy dissipation plates is a key advantage that should be exploited in the design of resilient buildings.
Zhuojin Pipe Fitting Co., Ltd