ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Seismic Resilience Improvement of Underground Metro Station Structures Using Concrete-Filled Steel Tubular Composite Columns

Literature Overview and Context

This paper by Bao Hua from China Railway Siyuan Survey and Design Group Co., Ltd. addresses a problem that is becoming increasingly important in urban infrastructure: how to make underground metro station structures resilient to earthquakes. The author designed two types of concrete-filled steel tubular composite columns and compared their mechanical performance with ordinary concrete columns using ABAQUS finite element models. The two composite columns are:

The results show that Composite Column 1 performs best in terms of load-bearing capacity, lateral stiffness and hysteretic behaviour, and it remains nearly elastic even under 30 mm of vertical compressive deformation. Further analysis of its seismic performance in a metro station structure under a PGA of 0.3 g shows that Composite Column 1 exhibits smaller displacement response and better force performance, approaching elastic behaviour. The author concludes that Composite Column 1, relying on the high strength of UHPC and the confinement effect of the steel tube, can significantly improve the seismic performance of the central column and has good potential for engineering application.

This paper is relevant to me because I have supplied steel tubes for metro station construction, and I have seen the challenges of designing central columns that must support the roof slab while resisting seismic loads. The central column is a critical structural element — if it fails, the station can collapse. The use of composite columns with UHPC is a promising approach, and this paper provides useful quantitative evidence.

Key Technical Points and Interpretation

Comparison of Column Types

The table below summarises the key differences between the three column types studied.

Column Type Core Material Outer Layer Key Performance Characteristics
Composite Column 1 Ring steel tube filled with C40 concrete UHPC encasement Highest load-bearing capacity, highest lateral stiffness, best hysteretic behaviour, nearly elastic at 30 mm vertical compression.
Composite Column 2 Steel tube filled with C60 concrete C40 ordinary concrete encasement Intermediate performance; better than ordinary concrete column but inferior to Composite Column 1.
Ordinary concrete column C40 concrete None Lowest load-bearing capacity and lateral stiffness; significant stiffness degradation under cyclic loading.

The superiority of Composite Column 1 is attributed to two mechanisms: the high strength of the UHPC outer layer, which provides additional compressive capacity and stiffness, and the confinement effect of the steel tube, which improves the ductility and energy dissipation capacity of the core concrete. The combination of UHPC and steel tube confinement creates a column that is both strong and ductile, which is exactly what you need in a seismic design.

Seismic Performance in Metro Station Structure

The author analysed the seismic performance of Composite Column 1 in a full metro station model under a PGA of 0.3 g. The results show that the displacement response of the structure with Composite Column 1 is smaller than with the other column types, and the force performance is better. The column approaches elastic behaviour, meaning that it does not suffer significant damage under the design earthquake.

This is an important finding. In a metro station, the central column is often the weakest link in the seismic load path. If the column remains elastic under the design earthquake, the structure is much more likely to survive without collapse. The use of Composite Column 1 appears to achieve this goal.

Soil-Structure Interaction

The paper also considers soil-structure interaction, which is critical for underground structures. The seismic response of an underground structure is strongly influenced by the surrounding soil, and the author has included this in the model. This is a sophisticated approach, and it gives more confidence in the results than a simple fixed-base model would.

From my perspective, soil-structure interaction is often the source of the greatest uncertainty in underground structure design. The soil properties, the depth of the structure, and the groundwater conditions all affect the seismic response. The fact that the author has included this in the analysis is a sign of good practice.

Engineering Practice Integration

Practical Considerations for Steel Tube Supply

If I were supplying the steel tubes for a project using Composite Column 1, I would need to consider several practical issues:

  1. Tube geometry. The ring-shaped steel tube must be manufactured to tight tolerances to ensure proper fit with the UHPC encasement. The tube must be round, with minimal out-of-roundness, and the ends must be prepared for welding or connection.
  2. Surface preparation. The outer surface of the steel tube must be clean and free of rust, oil and other contaminants before the UHPC is placed. This is critical for achieving a good bond between the steel and the UHPC. In practice, this means sandblasting or shot blasting the tube surface to a specified cleanliness level.
  3. Concrete placement. The UHPC encasement must be placed carefully to avoid voids and to ensure complete confinement of the steel tube. This is particularly important in the ring-shaped tube, where the UHPC must fill the space between the tube and the outer formwork.
  4. Connection details. The columns must be connected to the roof slab and the base slab. The connection details must be designed to transfer the loads effectively and to maintain the confinement effect of the steel tube.

Cost and Constructability

The use of UHPC is more expensive than ordinary concrete, and the construction process is more complex. However, the performance benefits are significant. In a metro station, the central column is a critical element, and the cost of improving its seismic performance is small compared to the cost of the overall station. If the column can be made to remain elastic under the design earthquake, the risk of collapse is greatly reduced.

From a constructability standpoint, the ring-shaped steel tube with UHPC encasement is more complex than a conventional steel tube filled with concrete. The UHPC must be placed in a thin layer around the tube, which requires careful formwork and placement techniques. However, this is not insurmountable, and the benefits justify the additional effort.

Study Insights and Reflections

This paper is a valuable contribution to the field of seismic design of underground structures. The author has done a thorough job of comparing different column types and analysing their performance in a realistic metro station model with soil-structure interaction. The finding that Composite Column 1, with UHPC encasement and steel tube confinement, performs best is consistent with the fundamental principles of composite structure design: high strength materials and confinement work together to create a ductile, energy-dissipating element.

What I would add to the author's analysis is the importance of the steel tube in the overall behaviour. The steel tube provides the confinement that keeps the core concrete from spalling and maintains the load-bearing capacity even after the concrete has cracked. The UHPC outer layer provides additional compressive strength and stiffness. The combination is powerful, but it requires careful attention to the bond between the steel and the UHPC, and to the connection details at the column ends.

I would also note that the paper focuses on the central column, but the seismic performance of the entire station depends on the interaction between the columns, the roof slab, the base slab and the surrounding soil. The author has included this interaction in the model, which is good, but the results should be interpreted with the understanding that the soil properties and the depth of the station can vary significantly between different sites.

Conclusion

This paper provides strong evidence that concrete-filled steel tubular composite columns with UHPC encasement can significantly improve the seismic resilience of underground metro station structures. The combination of UHPC high strength and steel tube confinement creates a column that is both strong and ductile, and it remains nearly elastic under the design earthquake. The practical implications are clear: for critical underground structures, the use of such composite columns can reduce the risk of collapse and improve the overall resilience of the infrastructure. From a steel tube supply perspective, the key considerations are tube geometry, surface preparation, concrete placement and connection details. I recommend this paper to structural engineers and to steel tube suppliers involved in underground infrastructure projects, and I encourage them to consider the use of UHPC-encased composite columns in future designs. The research is a step forward in the seismic design of underground structures, and it has good potential for engineering application.