Membrane-Based Resource Utilization of Steel Pipe Pickling Waste Liquid
Background and the Problem Statement
Steel pipe production requires surface cleaning before coating, galvanizing or further processing. The most common method is pickling with dilute sulfuric acid, which removes scale and rust but produces a waste liquid containing free acid and iron salts. This waste is classified as hazardous, and the disposal cost is high. The environmental risk is also significant because the acid can leach into groundwater if the waste is not properly managed. This paper from Baowu Group Environmental Resources Technology Co., Ltd. presents a new process that uses a special water treatment membrane to recover acid and produce a valuable by-product. The existing methods are well known: freeze crystallization, iron filings to produce ferrous sulfate, and catalytic oxidation to produce polyferric sulfate. Each has limitations, and the paper proposes a hybrid approach that combines freeze crystallization with membrane separation.
Existing Treatment Methods and Their Limitations
The freeze crystallization method is the most common. It involves cooling the waste liquid to crystallize the iron sulfate, which is then separated and sold as a by-product. The remaining acid can be reused, but the process is energy-intensive and the acid recovery is not complete. There are two variants: vacuum evaporation and acid addition without evaporation. The vacuum evaporation method is more efficient but requires expensive equipment. The iron filings method is simpler: it adds iron to the waste liquid to produce ferrous sulfate, which is a valuable coagulant. However, the reaction is slow and the product quality depends on the iron source. The catalytic oxidation method produces polyferric sulfate, which is a high-quality coagulant, but the process requires a catalyst and careful control of the oxidation conditions. The paper does not dismiss these methods; it builds on them by adding a membrane separation step.
| Method | Advantages | Disadvantages |
|---|---|---|
| Freeze crystallization | Simple, proven | Energy-intensive, incomplete acid recovery |
| Iron filings to ferrous sulfate | Low cost, valuable product | Slow reaction, variable quality |
| Catalytic oxidation to polyferric sulfate | High-quality product | Catalyst cost, process control |
| Membrane-based hybrid | High recovery, low waste | Membrane fouling, capital cost |
New Membrane-Based Process Description
The new process starts with freeze crystallization, which separates the waste into a solid phase and a liquid phase. The solid phase, which is mainly iron sulfate, is re-dissolved and purified to produce a coagulant for water treatment. This is a valuable product that can offset the treatment cost. The liquid phase, which contains the free acid, is then processed through a series of membrane steps. The first step is acid separation, which uses a special membrane to separate the acid from the remaining impurities. The second step is impurity removal, which uses another membrane to remove dissolved metals and other contaminants. The final step is concentration or crystallization, which recovers the acid in a form that can be reused in the pickling line. The system water is also recovered and can be reused in the plant. The result is a closed-loop process that significantly reduces the volume of hazardous waste.
Comparative Analysis and Environmental Benefits
The membrane-based process offers several advantages over the existing methods. First, it recovers a higher percentage of the acid, which reduces the need for fresh acid and lowers the operating cost. Second, it produces a high-quality coagulant from the solid phase, which generates revenue. Third, it recovers the system water, which reduces the water consumption of the plant. Fourth, it reduces the volume of hazardous waste, which lowers the disposal cost and the environmental risk.
Zhuojin Pipe Fitting Co., Ltd