Impact Resistance of Concrete-Filled Steel Tubes and Recycled Aggregate Concrete-Filled Steel Tubes: A State-of-the-Art Review
Review Scope and Research Background
This review from Hunan University and Wuhan University of Technology covers a topic that is often overlooked in structural engineering: what happens to a concrete-filled steel tube (CFST) column when it is hit by a vehicle, a ship, or a blast wave? Most structural design assumes static or quasi-static loading, but real structures are subject to dynamic loading from impacts and explosions. The review synthesizes the available research on the impact resistance of CFST and recycled aggregate concrete-filled steel tube (RACFST) members, and identifies the gaps in the current knowledge.
The review covers the effects of strain rate, high temperature, confinement coefficient, material strength, impact energy, and external confinement on the impact performance of CFST. It also discusses the dynamic mechanical properties of recycled aggregate concrete and how they differ from those of normal concrete.
Key Findings on Impact Performance
The review highlights several important findings. First, the strain rate effect is significant — the apparent strength of both steel and concrete increases with strain rate, which means that CFST columns perform better under impact loading than under static loading. Second, the confinement coefficient, which is a measure of the steel tube's ability to confine the concrete core, has a significant effect on the impact performance. Higher confinement coefficients lead to better impact resistance. Third, the impact energy and the impact velocity determine the failure mode — low-energy impacts cause local denting, while high-energy impacts cause global failure.
| Factor | Effect on Impact Performance |
|---|---|
| Strain rate | Increases apparent strength of steel and concrete |
| Confinement coefficient | Higher coefficient improves impact resistance |
| Impact energy | Determines failure mode (local denting vs. global failure) |
| High temperature | Reduces strength and ductility, degrades impact resistance |
| FRP external confinement | Improves impact resistance by providing additional confinement |
The review also notes that the research on RACFST is limited. Most studies have focused on static loading, and the dynamic behavior of RACFST is not well understood. The authors speculate, based on the available data, that RACFST has good impact resistance because the steel tube provides confinement that mitigates the weaknesses of recycled aggregate concrete.
Implications for Recycled Aggregate Concrete in CFST
The use of recycled aggregate concrete in CFST columns is an attractive option from a sustainability perspective, but it raises quality control concerns. Recycled aggregate is variable in quality — the particle size distribution, the moisture content, and the presence of contaminants all vary from batch to batch. This variability affects the concrete properties, including the compressive strength, the elastic modulus, and the bond with the steel tube.
From a manufacturing perspective, the key is to control the quality of the recycled aggregate. The aggregate must be properly processed — crushed, screened, and washed — to remove contaminants and achieve a consistent particle size distribution. The concrete mix design must be adjusted to account for the higher water absorption of recycled aggregate. And the placement and compaction of the concrete in the steel tube must be carefully controlled to avoid voids.
Practical Lessons and Recommendations
The review provides a useful overview of the current state of knowledge, but it also highlights the gaps. The most significant gap is the lack of research on the impact performance of RACFST. The authors' speculation that RACFST has good impact resistance is reasonable, but it is not supported by experimental data. This is a problem for engineers who want to use RACFST in structures that are subject to impact loading.
My recommendation is to be cautious when using RACFST in impact-critical applications. The steel tube provides excellent confinement, but the recycled aggregate concrete is still a variable material. If the concrete strength is not consistent, the performance of the CFST column will be inconsistent. For structures that are subject to impact loading — bridge piers, protective structures, offshore platforms — I would recommend using normal concrete until the research on RACFST impact performance is more mature.
The most important lesson from this review is that impact loading is different from static loading, and the design must account for this difference. The strain rate effect is significant, and the failure modes are different. A column that is adequate for static loading may not be adequate for impact loading. This is a lesson that I have learned the hard way — I have seen CFST columns that were designed for static loads fail under impact because the design did not account for the dynamic effects.
Zhuojin Pipe Fitting Co., Ltd