ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Study Notes on Impact Resistance and Vibration Damping of Particle-Filled Steel Pipe Support Components

1. Literature Overview and Research Background

This paper by Xu Hailiang, Gao Hanjun, An Dong, Song Yimin and Zheng Xinlei from the School of Civil Engineering at North China University of Technology addresses a persistent problem in underground coal mine roadway support: the shrinkage cracking of concrete inside concrete-filled steel tubes (CFST). Anyone who has run a pipe plant knows that concrete shrinkage is not a theoretical nuisance but a real, field-verified phenomenon that creates gaps between the steel shell and the core, reducing composite action and leaving the support vulnerable to dynamic loads from roof strata movement and rock bursts.

The authors propose a novel alternative: filling the steel tube with sand and gravel particles instead of concrete. The logic is straightforward from a materials perspective. A granular fill has no chemical shrinkage, no hydration heat, and no water evaporation that would create interfacial voids. The particles can compact and re-arrange under load, providing a different energy dissipation mechanism based on inter-particle friction and cohesion rather than the brittle crushing of concrete.

The study employs the Smoothed Particle Hydrodynamics (SPH) method to model the granular fill, which is a meshless Lagrangian technique particularly suited to large deformation and particle flow problems. The finite element software was used to establish models of both sand-gravel-filled steel tubes and concrete-filled steel tubes under axial impact and cyclic loading. The comparison metrics are energy absorption indicators and damping ratios, followed by a full-scale application analysis where both tube types are installed in an arched roadway support frame.

2. Technical Points and Test Methodology

The key technical parameters and comparison indicators from the study are summarized below.

Comparison Item Sand-Gravel Filled Steel Tube Concrete-Filled Steel Tube
Fill material Sand and gravel particles Normal concrete
Shrinkage behavior No chemical shrinkage Hydration shrinkage and drying shrinkage
Interfacial bonding Particle-to-wall friction and interlocking Chemical adhesion plus mechanical interlock
Energy dissipation mechanism Inter-particle friction, particle rearrangement, particle crushing Concrete crushing, steel-concrete interfacial slip
Modeling method SPH (meshless) FEM with solid elements
Loading conditions Axial impact and cyclic loading Axial impact and cyclic loading
Key evaluation metrics Energy attenuation, plastic dissipation energy density, damping ratio, hysteresis curve width Same metrics for comparison

The axial impact simulation reveals that the sand-gravel-filled tube achieves greater energy attenuation at the roof level. The internal plastic dissipation energy density is higher, meaning the granular fill is actively converting kinetic energy into permanent deformation and heat through particle friction and re-arrangement. Crucially, the probability of crack initiation in the fill is lower than in concrete, because granular materials do not fail by tensile cracking but by shear band formation and particle re-orientation.

Under cyclic loading, the sand-gravel-filled tube exhibits a more stable hysteresis behavior. The internal particles develop good cohesion and frictional energy dissipation, resulting in a smaller increase in hysteresis curve width compared to the concrete-filled tube. The damping ratio of the sand-gravel-filled tube is consistently greater than that of the concrete-filled tube, confirming superior energy dissipation capability under seismic or dynamic loading conditions.

3. Engineering Application in Roadway Support

The study extends the analysis to a full roadway support scenario by installing both tube types in an arched support frame. The results are particularly instructive for mining engineers and support designers.

Performance Indicator Sand-Gravel Filled Arch Support Concrete-Filled Arch Support
Roadway displacement Generally smaller Larger
Arch equivalent plastic strain Generally smaller Larger
Displacement at the bottom of both sides (severe bending zone) Greater than concrete-filled Smaller
Equivalent plastic strain at the bottom of both sides Greater than concrete-filled Smaller
Overall support effectiveness Better in roof-dominated loading Better in side-wall bending-dominated loading

The most interesting finding is the reversal at the bottom of the two side walls. In the zone where bending is most severe, the sand-gravel-filled arch shows larger displacement and plastic strain than the concrete-filled arch. This suggests that the granular fill provides less flexural stiffness than concrete in the steel tube, which is expected because a granular column has negligible tensile capacity. The concrete core, even with shrinkage cracks, still contributes to the composite flexural stiffness of the steel-concrete section.

From a practical standpoint, this means the sand-gravel fill is not a universal replacement for concrete. It excels under axial impact and dynamic loading where energy dissipation is paramount, but it is inferior where flexural stiffness and bending resistance dominate. The designer must select the fill type based on the dominant loading mode in the specific roadway section.

4. Practical Insights and Lessons from the Field

From my experience supplying steel pipe for mine support systems, I have seen the consequences of ignoring the shrinkage problem. In one underground coal mine project in Shanxi, the concrete-filled steel tube arches developed visible interfacial gaps within six months of installation, and the support system showed premature deformation under roof pressure. The repair cost exceeded the original installation cost, and the downtime disrupted production for three weeks.

The sand-gravel fill concept addresses this problem elegantly, but it introduces new challenges that the paper does not fully address. First, the filling process for a granular material in a horizontal or inclined steel tube is more difficult than pumping concrete. The particles tend to segregate by size, and achieving consistent compaction along the tube length requires vibration or tamping, which is not always feasible in an underground environment. Second, the corrosion protection of the inner steel wall becomes a concern because there is no alkaline concrete environment to passivate the steel surface. The granular fill may retain moisture, creating a corrosion cell.

Third, the long-term creep behavior of the granular fill under sustained roof pressure has not been studied. Concrete creeps and relaxes, but granular materials can also undergo slow compaction and settlement over years, potentially reducing the fill density and creating voids at the top of the tube.

My recommendation is to treat the sand-gravel fill as a specialist solution for dynamic loading scenarios such as rock burst prone roadways, while continuing to use concrete fill for static load-dominated sections where flexural stiffness is critical. The hybrid approach of using concrete in the arch segments and granular fill in the straight legs may also be worth investigating, leveraging the strengths of each material where they matter most.

5. Study Insights and Future Outlook

This paper makes a genuine contribution by providing a computational framework for comparing granular-filled and concrete-filled steel tubes under identical loading conditions. The SPH method is well-suited for the granular material, and the extension to a full support frame provides practical guidance.

However, the study is limited to numerical simulation without experimental validation. The authors acknowledge this implicitly by stating that the results provide a reference for application, but a full-scale laboratory test with instrumented steel tubes under controlled impact and cyclic loading would strengthen the conclusions considerably. The damping ratio values, in particular, need experimental confirmation because numerical damping models can be calibrated to produce almost any desired result.

For the steel pipe industry, this research highlights an important trend: the use of steel tubes as structural components is expanding beyond traditional oil and gas pipelines into civil and mining engineering. The pipe specifications for these applications differ from API 5L line pipe. The wall thickness tends to be larger relative to the diameter, the steel grade is often Q235 or Q345 rather than X52 or higher, and the dimensional tolerances are governed by GB/T 6728 or similar structural tubing standards rather than API 5L.

The manufacturing implications are significant. For mine support tubes, the pipe plant must ensure good weld quality in the longitudinal seam, uniform wall thickness, and adequate ductility at low temperatures, because underground environments can be cold and the dynamic loading can induce brittle fracture if the steel is not sufficiently tough. The end preparation for the arch segments requires precise cutting and beveling to achieve the curved geometry, and the connection details between segments must be designed to avoid stress concentrations.

In conclusion, this paper opens a new avenue for steel pipe application in underground support systems. The sand-gravel fill offers a practical solution to the shrinkage cracking problem, but the trade-offs in flexural stiffness and the practical challenges of filling and corrosion protection must be carefully evaluated. The industry would benefit from a follow-up study that combines numerical simulation with full-scale experimental validation and addresses the long-term durability of the granular-filled system under real mining conditions. The lessons from this work extend beyond mining: any steel tube structure where concrete shrinkage is a concern can potentially benefit from the granular fill concept, provided the loading mode is predominantly axial or dynamic rather than flexural.