Steel Tube and Concrete-Filled Steel Tube Composite Arch Bridges
Overview and Context of the Study
This paper by Chen Baochun, Chen Youjie and Liu Yuqing, published in Bridge Construction in 2001, introduces the concept of the steel tube and concrete-filled steel tube (CFST) composite arch bridge. The authors present the design principles of this new type of bridge and provide a detailed description of the design of the Shanqian Bridge in Fuding City, Fujian Province, which served as a test bridge for the concept. The paper represents a significant step forward in the development of composite arch bridges, combining the advantages of steel tubes and CFST to create a structure that is both lightweight and highly efficient.
From my experience in the field, I can attest that the concept of the composite arch bridge is a clever solution to a common problem: the need for a lightweight and efficient arch structure that can be erected quickly and economically. Traditional steel arch bridges are lightweight but require significant amounts of steel, while traditional concrete arch bridges are heavy and require complex formwork and support systems. The composite arch bridge combines the two, using steel tubes for the arch ribs and CFST for the main structural members, to create a structure that is both lightweight and strong.
Key Technical Points and Interpretation
1. Concept of the Composite Arch Bridge
The composite arch bridge uses steel tubes for the arch ribs, which are filled with concrete to create CFST members. The steel tube serves as both the permanent formwork and the primary reinforcement for the concrete core, while the concrete core provides the compressive strength and stiffness required for the arch. This combination allows for a lightweight structure with a high load-carrying capacity, making it particularly suitable for long-span bridges.
2. Design Principles
The authors outline several key design principles for the composite arch bridge. The first is the use of a steel tube with a diameter-to-wall-thickness ratio that ensures the tube can be filled with concrete without the risk of buckling. The second is the use of a concrete mix that can be placed and compacted within the steel tube, typically using self-compacting concrete or a high-slump concrete. The third is the design of the connections between the steel tubes and the concrete core, which must ensure that the two materials work together as a composite section.
3. The Shanqian Bridge Design
The Shanqian Bridge is a three-span arch bridge with a main span of 80 metres. The arch ribs are made of steel tubes with a diameter of 800 mm and a wall thickness of 14 mm, filled with C50 concrete. The bridge was designed to carry a two-lane road with a width of 9 metres. The design incorporates several innovative features, including the use of steel tube trusses for the arch ribs and the use of a composite deck system.
Integration with Manufacturing and Delivery Practice
1. Fabrication of Steel Tubes for Arch Bridges
The fabrication of steel tubes for arch bridges requires a high level of precision and quality control. The tubes must be manufactured to tight tolerances in terms of diameter, wall thickness, and straightness, as any deviation can affect the structural performance of the arch. In my experience, the most common method for manufacturing large-diameter steel tubes for arch bridges is the spiral welded pipe process, which allows for the production of tubes with a wide range of diameters and wall thicknesses. The welding process must be carefully controlled to ensure the quality of the weld seam, as the weld is a critical part of the tube's structural performance.
2. Concrete Placement in Arch Tubes
The placement of concrete in arch tubes is a challenging operation, particularly for long-span bridges where the tubes are inclined or curved. The concrete must be placed in a continuous manner to avoid the formation of cold joints, and it must be compacted to ensure that it fills all voids and corners. The use of self-compacting concrete is recommended for this application, as it eliminates the need for vibration and ensures that the concrete flows into all parts of the tube. In practice, the concrete is typically pumped from the base of the arch, with the placement sequence carefully designed to ensure that the concrete is evenly distributed.
3. Erection and Assembly
The erection of a composite arch bridge requires careful planning and coordination. The steel tubes are typically prefabricated in sections and transported to the site, where they are assembled and welded together. The arch is then erected using a variety of methods, including the use of temporary supports, cable-stayed erection, or the incremental launching method. The choice of erection method depends on the site conditions, the span of the arch, and the availability of equipment. In my experience, the most common method for medium-span arches is the use of temporary supports, which are removed after the arch is self-supporting.
Critical Reflection and Lessons Learned
1. The Importance of Quality Control in Steel Tube Fabrication
The quality of the steel tubes used in composite arch bridges is critical to the performance of the structure. The tubes must be manufactured to tight tolerances, and the weld seams must be inspected using non-destructive testing methods to ensure their quality. In my experience, the most common defects in steel tubes for arch bridges are lack of fusion, porosity, and slag inclusion in the weld seam. These defects can significantly reduce the load-carrying capacity of the tube and should be detected and repaired before the tube is used in the bridge.
2. The Need for Proper Concrete Placement
The placement of concrete in arch tubes is a critical operation that requires careful planning and execution. The concrete must be placed in a continuous manner, and the placement sequence must be designed to ensure that the concrete is evenly distributed. In practice, I have seen cases where the concrete was not properly placed, leading to voids and a reduction in the load-carrying capacity of the CFST. The use of self-compacting concrete can help to mitigate this risk, but it is not a substitute for proper placement procedures.
3. The Role of the Composite Action
The composite action between the steel tube and the concrete core is essential for the performance of the CFST. The steel tube provides lateral confinement to the concrete core, which increases the compressive strength and ductility of the concrete. The concrete core, in turn, prevents the steel tube from buckling, which increases the load-carrying capacity of the tube. The design of the connections between the steel tube and the concrete core is critical to ensure that the two materials work together as a composite section. In practice, the most common method for ensuring composite action is the use of shear connectors, such as studs or ribs, which are welded to the inside of the steel tube.
Study Insights and Practical Recommendations
This paper provides a valuable introduction to the concept of the composite arch bridge and a detailed description of the design of the Shanqian Bridge. The key takeaway for practising engineers is that the composite arch bridge offers a viable alternative to traditional steel and concrete arch bridges, providing a lightweight and efficient structure that can be erected quickly and economically. However, the successful implementation of this type of bridge requires careful attention to the fabrication of the steel tubes, the placement of the concrete, and the design of the connections between the steel and the concrete.
From a practical standpoint, I would recommend that engineers involved in the design and construction of composite arch bridges pay close attention to the following aspects: the quality control of the steel tube fabrication, the placement of the concrete in the arch tubes, and the design of the composite action between the steel and the concrete. The use of self-compacting concrete is recommended for the concrete placement, as it eliminates the need for vibration and ensures that the concrete fills all voids and corners. The erection method should be carefully planned to ensure that the arch is stable at all stages of construction.
In conclusion, this paper is a valuable reference for engineers involved in the design and construction of composite arch bridges. It provides a clear introduction to the concept and a detailed description of the design of a real bridge, demonstrating the feasibility and benefits of this type of structure. I would recommend that all engineers involved in the design of arch bridges read this paper and consider the use of the composite arch bridge concept in their own projects.
Zhuojin Pipe Fitting Co., Ltd