Recycled Concrete-Filled Square Steel Tube Long Columns: Experimental Study on Eccentric Compression
Introduction and Research Motivation
The 2017 paper by Yu Xiaolong, Wang Chenggang, Liu Bingkang, and colleagues from Hefei University of Technology addresses an increasingly important topic in structural engineering: the use of recycled concrete in composite steel-concrete structures. This research is motivated by the growing need for sustainable construction materials and the desire to reduce the environmental impact of the construction industry.
The study focuses on square steel tube columns filled with recycled concrete, subjected to eccentric compression. This is a critical loading condition for columns in real structures, where axial loads are rarely perfectly centered. The eccentricity creates a bending moment that significantly affects the column's behavior and capacity.
The use of recycled concrete in steel tube columns is particularly attractive because the steel tube provides confinement, which can compensate for the lower strength and ductility of recycled concrete. This makes the composite system more forgiving of the recycled aggregate's inherent variability.
Test Program and Observations
The research involved testing eight square steel tube recycled concrete long columns under eccentric compression. The test program was designed to investigate the effect of four key parameters:
| Parameter | Range Tested | Expected Effect |
|---|---|---|
| Recycled coarse aggregate replacement rate | 0%, 30%, 50%, 100% | Higher replacement reduces concrete strength and ductility |
| Steel tube wall thickness | Varying | Thicker walls provide more confinement and stiffness |
| Eccentricity ratio | Varying | Higher eccentricity reduces axial capacity |
| Slenderness ratio | Varying | Higher slenderness reduces stability |
The test results provided valuable data on:
- Ultimate bearing capacity: The maximum axial load the column could sustain.
- Failure mode: The mode of failure (e.g., local buckling, concrete crushing, overall buckling).
- Axial load-displacement curves: The full load-deformation response, which reveals the column's stiffness and ductility.
- Axial load-lateral deflection curves: The relationship between the axial load and the lateral deflection at mid-height, which is critical for understanding the P-Δ effect.
Parametric Effects on Bearing Capacity
The study's findings on the effect of each parameter on the ultimate bearing capacity are summarized below.
| Parameter | Effect on Ultimate Capacity | Physical Explanation |
|---|---|---|
| Eccentricity ratio | Significant negative effect | Higher eccentricity increases the bending moment, reducing the axial capacity |
| Slenderness ratio | Significant negative effect | Higher slenderness increases the P-Δ effect and reduces stability |
| Steel tube wall thickness | Significant positive effect | Thicker walls provide more steel area and better confinement |
| Recycled aggregate replacement rate | Moderate negative effect | Higher replacement reduces concrete strength, but the effect is less than expected due to confinement |
The most interesting finding is the relatively small effect of the recycled aggregate replacement rate. This suggests that the steel tube confinement compensates for the reduced concrete strength. This is a significant result because it indicates that recycled concrete can be used in steel tube columns without a significant penalty in capacity.
Failure Modes and Ductility
The failure modes observed in the tests are consistent with what would be expected for CFST columns:
- Local buckling of the steel tube: This occurs when the steel tube wall buckles outward, typically at the mid-height of the column. The buckling is more pronounced for thinner walls and higher slenderness ratios.
- Concrete crushing: The concrete core crushes under compression, typically at the compression face of the column. The crushing is more extensive for higher recycled aggregate replacement rates.
- Overall buckling: For slender columns, the column may buckle globally, leading to a sudden loss of capacity. This is more likely for higher slenderness ratios.
The ductility of the columns is an important consideration. The tests likely showed that the columns with higher recycled aggregate replacement rates had lower ductility, meaning they were less able to sustain deformation after reaching their peak load. However, the steel tube confinement improved the ductility compared to plain recycled concrete columns.
Practical Implications for Construction
For engineers and contractors considering the use of recycled concrete in steel tube columns, this research provides several important insights:
- Recycled concrete is viable: The use of recycled concrete in steel tube columns is technically feasible, with only a moderate reduction in capacity. This is a significant finding for sustainable construction.
- The steel tube is critical: The steel tube provides confinement that compensates for the reduced strength of recycled concrete. This means that the steel tube must be properly designed to provide adequate confinement.
- Eccentricity and slenderness are the key design parameters: These parameters have a much larger effect on capacity than the recycled aggregate replacement rate. Designers should focus on these parameters when sizing the column.
- Quality control is essential: The variability of recycled concrete is higher than that of conventional concrete. This means that quality control during mixing and placement is critical.
Summary
This study provides valuable experimental data on the behavior of recycled concrete-filled square steel tube long columns under eccentric compression. The key finding is that the use of recycled concrete is viable, with only a moderate reduction in capacity. The steel tube confinement compensates for the reduced concrete strength, making the composite system more forgiving of the recycled aggregate's variability. For practicing engineers, this research offers a practical basis for designing sustainable composite columns. The parametric study provides clear guidance on the effect of eccentricity, slenderness, steel tube wall thickness, and recycled aggregate replacement rate. As the construction industry continues to move toward more sustainable practices, this type of research is essential for enabling the use of recycled materials in structural applications. The findings have direct implications for the design of columns in buildings, bridges, and other structures where sustainability and performance are both critical.
Zhuojin Pipe Fitting Co., Ltd