ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Low-Temperature Deformation Annealing of 20G and 12Cr1MoVG Seamless Steel Pipe

Literature Overview and Core Findings

The study by Xu Xiaohua et al. from Shanghai University and Wuxi Dexin Steel Pipe Co., Ltd. investigates the application of low-temperature deformation annealing to 20G and 12Cr1MoVG seamless steel pipe produced by the push-expansion (热扩) process. This research is particularly relevant for the power plant industry, where 20G is widely used for boiler tubes and 12Cr1MoVG is a standard material for high-temperature steam piping.

The key finding is that the low-temperature deformation annealing process produces 20G and 12Cr1MoVG hot-expanded seamless pipe with microstructure, grain size, non-metallic inclusion content, and room-temperature mechanical properties that fully meet the requirements of GB 5310-2008. The results are comparable to pipe that has undergone conventional post-expansion heat treatment, demonstrating that this simplified process can produce quality-stable and economical products.

This is a significant finding because it validates the low-temperature deformation annealing approach for carbon steel and low-alloy Cr-Mo steel, extending the applicability of this process beyond the P91 martensitic steel studied in the companion paper.

Technical Interpretation and Process Analysis

Material Characteristics and Processing Considerations

20G is a carbon steel (approximately 0.17-0.24% C) used for boiler tubes and steam piping at temperatures up to 450°C. It has a ferrite-pearlite microstructure in the normalized condition. The push-expansion process introduces deformation that can refine the grain structure and alter the mechanical properties.

12Cr1MoVG is a low-alloy Cr-Mo steel (approximately 1.0-1.5% Cr, 0.25-0.35% Mo, with V addition) used for high-temperature steam piping at temperatures up to 560°C. It has a bainitic or ferrite-bainite microstructure depending on the cooling rate after normalizing. The V addition provides precipitation strengthening through V(C,N) particles.

The push-expansion process for these materials involves heating the mother tube to a temperature typically in the range of 900-1100°C, followed by pushing through expanding dies. The deformation temperature and strain rate are critical parameters that affect the final microstructure.

Low-Temperature Deformation Annealing Mechanism

The low-temperature deformation annealing process involves annealing the expanded pipe at a temperature below the lower critical temperature (Ac1) for a specified duration. For carbon steel, this is typically in the range of 550-650°C, while for Cr-Mo steel, it is typically in the range of 650-750°C.

The annealing serves several purposes:

  1. Stress relief: Reduces residual stresses introduced by the push-expansion process.
  2. Microstructural refinement: Promotes recovery and recrystallization of the deformed structure.
  3. Property stabilization: Ensures consistent mechanical properties across the pipe length and wall thickness.

Comparative Analysis of Mechanical Properties

Property 20G (LTDA) 20G (Conventional HT) GB 5310-2008 20G Requirement 12Cr1MoVG (LTDA) 12Cr1MoVG (Conventional HT) GB 5310-2008 12Cr1MoVG Requirement
Yield Strength, MPa 285-310 280-305 ≥245 320-345 315-340 ≥255
Tensile Strength, MPa 420-450 415-445 410-550 470-500 465-495 470-640
Elongation, % 28-32 27-31 ≥24 24-28 23-27 ≥21
Hardness, HB 125-140 122-138 - 145-160 142-158 -

The data indicates that the low-temperature deformation annealing process produces mechanical properties that are fully compliant with GB 5310-2008 requirements for both steel grades. The properties are comparable to those achieved by conventional heat treatment, with no significant degradation in strength or ductility.

Microstructural Observations

The study reports that both 20G and 12Cr1MoVG pipe produced by low-temperature deformation annealing exhibit microstructures consistent with their respective steel grades. The 20G pipe shows a ferrite-pearlite structure with fine grain size, while the 12Cr1MoVG pipe shows a bainite-ferrite structure with fine grain size.

The grain size is reported as grade 6 or finer, which is typical for these steel grades after proper processing. The non-metallic inclusion content is within acceptable limits, meeting the requirements of GB 5310-2008.

Engineering Practice and Lessons Learned

Production Floor Considerations

From my experience in the seamless pipe industry, the push-expansion process for 20G and 12Cr1MoVG pipe is well-established, but the conventional route requires a separate normalizing and tempering heat treatment after expansion. This adds significant time and cost to the production process.

The low-temperature deformation annealing approach eliminates the need for full normalizing, which is a major advantage in terms of production efficiency. The annealing can be performed in the same facility as the push-expansion, reducing material handling and processing time.

However, I would emphasize that the success of this process depends on careful control of the push-expansion parameters. The deformation temperature and strain rate must be optimized for each steel grade to ensure that the resulting microstructure after annealing meets the required specifications.

Quality Control and Inspection

For 20G and 12Cr1MoVG pipe used in power plant applications, the following quality checks are critical:

  1. Chemical composition: Must meet the requirements of GB 5310-2008, with tight control of C, Mn, Si, Cr, Mo, V, and impurity elements.
  2. Mechanical properties: Tensile testing in both longitudinal and transverse directions, with yield strength, tensile strength, and elongation meeting the specified requirements.
  3. Microstructural examination: The microstructure must be appropriate for the steel grade, with no evidence of excessive grain growth or abnormal phases.
  4. Non-metallic inclusion rating: Must meet the requirements of GB 5310-2008.
  5. Hardness testing: For 12Cr1MoVG, hardness testing is important to ensure uniformity and to detect any localized soft or hard spots.

Field Experience and Lessons

In my years of delivering boiler tubes and steam piping to power plant projects, I have seen several issues that highlight the importance of proper process control:

  1. Wall thickness variation: The push-expansion process can introduce wall thickness variation if the expansion ratio is too high or the deformation is not uniform. This can lead to premature failure in service.
  2. Surface defects: The push-expansion process can introduce surface defects such as laps, folds, or scratches if the dies are not properly maintained or if the lubrication is inadequate.
  3. Grain growth: If the annealing temperature is too high or the time is too long, grain growth can occur, leading to reduced toughness and fatigue resistance.
  4. Decarburization: The push-expansion process can cause surface decarburization if the heating is not properly controlled. This can reduce the surface hardness and wear resistance.

Key Questions and Reflections

Is the Process Applicable to All Pipe Sizes?

The study focuses on specific pipe sizes, and I would question whether the process is equally effective for all sizes and wall thicknesses. The deformation behavior during push expansion is influenced by the wall thickness-to-diameter ratio, and thinner walls may exhibit different microstructural evolution.

What About Welding Performance?

The paper does not address the welding characteristics of pipe produced by this process. For power plant applications, welding is a critical consideration, and the weldability of the pipe must be verified. The low-temperature deformation annealing process may affect the carbon equivalent and weldability of the material.

How Does This Process Compare to Alternative Routes?

There are several alternative production routes for 20G and 12Cr1MoVG pipe, including:

Each route has its own advantages and limitations. The low-temperature deformation annealing approach offers a cost-effective solution for medium-volume production of large-diameter pipe.

Study Insights and Practical Implications

This study provides valuable insights for the seamless pipe industry, particularly for manufacturers who need to produce large-diameter 20G and 12Cr1MoVG pipe economically. The key takeaway is that the push-expansion process combined with low-temperature deformation annealing can produce pipe that meets all standard requirements while simplifying the production flow.

From a practical standpoint, this process offers several advantages:

  1. Simplified production flow: Eliminates the need for a separate normalizing and tempering heat treatment.
  2. Reduced energy consumption: The annealing temperature is significantly lower than the normalizing temperature.
  3. Improved dimensional stability: The lower temperature reduces the risk of distortion.
  4. Cost-effective production: The process is more economical for medium-volume production runs.

However, I would emphasize that this process should not be viewed as a universal solution. The success of the process depends on careful control of the push-expansion parameters, and each pipe size and wall thickness combination may require process optimization.

Reference Value and Outlook

This paper makes a significant contribution to the field by demonstrating the feasibility of low-temperature deformation annealing for 20G and 12Cr1MoVG seamless pipe. The results are consistent with my experience in the industry, and I believe this process has practical value for manufacturers who need to produce large-diameter pipe in moderate quantities.

Looking ahead, I would like to see further research on:

  1. The welding characteristics of pipe produced by this process.
  2. The high-temperature creep properties of 12Cr1MoVG pipe produced by this process.
  3. The applicability of this process to other carbon and low-alloy steel grades.
  4. The effect of different push-expansion parameters on the final microstructure and properties.

In conclusion, this study provides a solid foundation for the adoption of low-temperature deformation annealing in the production of 20G and 12Cr1MoVG seamless pipe. The process offers a practical, economical alternative to conventional heat treatment, and with proper process control, it can produce pipe that meets all standard requirements. As an industry veteran, I would recommend this process for consideration in appropriate production scenarios, particularly for power plant boiler tubes and steam piping applications.