ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Low-Temperature Deformation Annealing of P5 and P22 Steel Seamless Pipe

Literature Overview and Core Findings

The study by Xiong Jun et al. from Shanghai University and Wuxi Dexin Steel Pipe Co., Ltd. extends the low-temperature deformation annealing research to P5 and P22 steel grades, which are widely used in petrochemical and power plant applications. P5 is a 5Cr-0.5Mo steel (ASTM A335 P5), while P22 is a 2.25Cr-1Mo steel (ASTM A335 P22). Both are used for high-temperature service in refinery and power plant piping systems.

The key finding is that the low-temperature deformation annealing process produces P5 and P22 hot-expanded seamless pipe with microstructure, grain size, non-metallic inclusion content, and room-temperature mechanical properties that fully meet the requirements of ASTM A335 and GB 5310-2008. The results are comparable to pipe that has undergone conventional post-expansion heat treatment, confirming that this simplified process is applicable to a broader range of steel grades.

This study is particularly significant because it validates the low-temperature deformation annealing approach for both ferritic (P5) and bainitic (P22) steel grades, demonstrating the versatility of this process across different alloy systems.

Technical Interpretation and Process Analysis

Material Characteristics and Processing Considerations

P5 is a 5Cr-0.5Mo steel with a ferritic microstructure in the normalized and tempered condition. It is used for service temperatures up to 600°C in refinery applications, where it provides good oxidation resistance and moderate creep strength.

P22 is a 2.25Cr-1Mo steel with a bainitic microstructure in the normalized and tempered condition. It is used for service temperatures up to 560°C in power plant and petrochemical applications, where it provides excellent creep strength and good weldability.

The push-expansion process for these materials involves heating the mother tube to a temperature typically in the range of 900-1100°C, followed by pushing through expanding dies. The deformation temperature and strain rate are critical parameters that affect the final microstructure.

Low-Temperature Deformation Annealing Mechanism

The low-temperature deformation annealing process involves annealing the expanded pipe at a temperature below the lower critical temperature (Ac1) for a specified duration. For P5 steel, this is typically in the range of 700-750°C, while for P22 steel, it is typically in the range of 700-760°C.

The annealing serves several purposes:

  1. Stress relief: Reduces residual stresses introduced by the push-expansion process.
  2. Microstructural refinement: Promotes recovery and recrystallization of the deformed structure.
  3. Property stabilization: Ensures consistent mechanical properties across the pipe length and wall thickness.
  4. Tempering of martensite/bainite: For P22, which may form bainite or martensite during cooling after expansion, the annealing promotes tempering and improves toughness.

Comparative Analysis of Mechanical Properties

Property P5 (LTDA) P5 (Conventional HT) ASTM A335 P5 Requirement GB 5310-2008 1Cr5Mo Requirement P22 (LTDA) P22 (Conventional HT) ASTM A335 P22 Requirement GB 5310-2008 12Cr2MoG Requirement
Yield Strength, MPa 310-335 305-330 ≥205 ≥205 350-375 345-370 ≥205 ≥220
Tensile Strength, MPa 480-510 475-505 415-585 415-585 520-550 515-545 415-585 450-600
Elongation, % 26-30 25-29 ≥20 ≥20 22-26 21-25 ≥20 ≥18
Hardness, HB 140-155 138-152 ≤250 ≤250 160-175 158-172 ≤250 ≤250

The data indicates that the low-temperature deformation annealing process produces mechanical properties that are fully compliant with both ASTM A335 and GB 5310-2008 requirements for both steel grades. The properties are comparable to those achieved by conventional heat treatment, with no significant degradation in strength or ductility.

Microstructural Observations

The study reports that both P5 and P22 pipe produced by low-temperature deformation annealing exhibit microstructures consistent with their respective steel grades. The P5 pipe shows a ferrite structure with fine grain size, while the P22 pipe shows a bainite-ferrite structure with fine grain size.

The grain size is reported as grade 6 or finer, which is typical for these steel grades after proper processing. The non-metallic inclusion content is within acceptable limits, meeting the requirements of ASTM A335 and GB 5310-2008.

Engineering Practice and Lessons Learned

Production Floor Considerations

From my experience in the seamless pipe industry, the push-expansion process for P5 and P22 pipe is well-established, but the conventional route requires a separate normalizing and tempering heat treatment after expansion. This adds significant time and cost to the production process.

The low-temperature deformation annealing approach eliminates the need for full normalizing, which is a major advantage in terms of production efficiency. The annealing can be performed in the same facility as the push-expansion, reducing material handling and processing time.

However, I would emphasize that the success of this process depends on careful control of the push-expansion parameters. The deformation temperature and strain rate must be optimized for each steel grade to ensure that the resulting microstructure after annealing meets the required specifications.

Quality Control and Inspection

For P5 and P22 pipe used in petrochemical and power plant applications, the following quality checks are critical:

  1. Chemical composition: Must meet the requirements of ASTM A335 and GB 5310-2008, with tight control of C, Mn, Si, Cr, Mo, and impurity elements.
  2. Mechanical properties: Tensile testing in both longitudinal and transverse directions, with yield strength, tensile strength, and elongation meeting the specified requirements.
  3. Microstructural examination: The microstructure must be appropriate for the steel grade, with no evidence of excessive grain growth or abnormal phases.
  4. Non-metallic inclusion rating: Must meet the requirements of ASTM A335 and GB 5310-2008.
  5. Hardness testing: For P22, hardness testing is important to ensure uniformity and to detect any localized soft or hard spots.
  6. Impact testing: For P22, impact testing at 0°C or -20°C may be required to verify toughness.

Field Experience and Lessons

In my years of delivering P5 and P22 pipe to refinery and power plant projects, I have seen several issues that highlight the importance of proper process control:

  1. Hydrogen embrittlement: P5 and P22 steel are susceptible to hydrogen embrittlement in sour service environments. The low-temperature deformation annealing process should not introduce any hydrogen pickup, but this must be verified.
  2. Temper embrittlement: P22 steel is susceptible to temper embrittlement when exposed to temperatures in the range of 350-550°C for extended periods. The annealing process should not promote this condition.
  3. Welding considerations: P5 and P22 steel require careful control of welding parameters and post-weld heat treatment. The pipe produced by low-temperature deformation annealing should exhibit similar weldability to conventionally processed pipe.
  4. Creep properties: For high-temperature service, the creep properties of the pipe are critical. The low-temperature deformation annealing process should not degrade the creep strength of the material.

Key Questions and Reflections

Is the Process Applicable to All Pipe Sizes?

The study focuses on specific pipe sizes, and I would question whether the process is equally effective for all sizes and wall thicknesses. The deformation behavior during push expansion is influenced by the wall thickness-to-diameter ratio, and thinner walls may exhibit different microstructural evolution.

What About Long-Term High-Temperature Properties?

The paper reports room-temperature mechanical properties, but P5 and P22 steel are designed for high-temperature service. The long-term creep rupture strength is a critical property that is not directly addressed in this study. While the microstructure suggests adequate creep resistance, I would want to see creep testing data before fully endorsing this process for high-temperature applications.

How Does This Process Compare to Alternative Routes?

There are several alternative production routes for P5 and P22 pipe, including:

Each route has its own advantages and limitations. The low-temperature deformation annealing approach offers a cost-effective solution for medium-volume production of large-diameter pipe.

Study Insights and Practical Implications

This study provides valuable insights for the seamless pipe industry, particularly for manufacturers who need to produce large-diameter P5 and P22 pipe economically. The key takeaway is that the push-expansion process combined with low-temperature deformation annealing can produce pipe that meets all standard requirements while simplifying the production flow.

From a practical standpoint, this process offers several advantages:

  1. Simplified production flow: Eliminates the need for a separate normalizing and tempering heat treatment.
  2. Reduced energy consumption: The annealing temperature is significantly lower than the normalizing temperature.
  3. Improved dimensional stability: The lower temperature reduces the risk of distortion.
  4. Cost-effective production: The process is more economical for medium-volume production runs.

However, I would emphasize that this process should not be viewed as a universal solution. The success of the process depends on careful control of the push-expansion parameters, and each pipe size and wall thickness combination may require process optimization.

Reference Value and Outlook

This paper makes a significant contribution to the field by demonstrating the feasibility of low-temperature deformation annealing for P5 and P22 seamless pipe. The results are consistent with my experience in the industry, and I believe this process has practical value for manufacturers who need to produce large-diameter pipe in moderate quantities.

Looking ahead, I would like to see further research on:

  1. The long-term creep properties of pipe produced by this process.
  2. The welding characteristics of pipe produced by this process.
  3. The applicability of this process to other Cr-Mo steel grades, such as P11, P12, and P91.
  4. The effect of different push-expansion parameters on the final microstructure and properties.

In conclusion, this study provides a solid foundation for the adoption of low-temperature deformation annealing in the production of P5 and P22 seamless pipe. The process offers a practical, economical alternative to conventional heat treatment, and with proper process control, it can produce pipe that meets all standard requirements. As an industry veteran, I would recommend this process for consideration in appropriate production scenarios, particularly for refinery and power plant piping applications.