ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Eccentric Compression Bearing Capacity of Multi-Cavity Polygonal CFST Columns

Overview and Background

This paper by Xu Lihua and colleagues investigates the eccentric compression behavior of multi-cavity polygonal concrete-filled steel tube (CFST) columns, using the giant columns of the Tianjin Gaoyin 117 Tower as the prototype. The authors designed and tested 11 scaled specimens at 1/20 scale, then used finite element analysis to extend the parametric study.

From my experience with large-diameter steel pipe fabrication, multi-cavity polygonal columns represent a significant fabrication challenge. The steel tube is not a simple cylinder but a complex multi-chambered section with internal partitions. Each chamber is filled with concrete, and the composite action between the steel and concrete is critical for load-bearing capacity.

Technical Analysis of the Test Program

Specimen Design and Test Setup

The specimens were scaled at 1/20 from the prototype giant column. The cross-section was hexagonal with six chambers or pentagonal with four chambers, depending on the specimen series. The key parameters varied in the test were:

Failure Modes and Load-Deflection Behavior

All specimens exhibited bending-type instability failure, which is the expected mode for eccentrically loaded slender columns. The load-lateral deflection curves showed a gradual increase to peak load, followed by a descending branch. The load-strain curves confirmed that the steel tube and concrete core were working together until near the peak load.

Parametric Effects on Ultimate Bearing Capacity

The finite element parametric study revealed the following trends:

Parameter Range Studied Effect on Ultimate Capacity
Concrete strength Increasing Increases capacity
Steel tube wall thickness Increasing Increases capacity
Slenderness ratio 24 to 70 Decreases capacity by 38.6%
Eccentricity ratio 0.2 to 1.0 Decreases capacity by 54.1%
Internal reinforcement cage Present vs. absent Improves ductility and post-peak capacity

The slenderness ratio effect is particularly significant. A column with a slenderness ratio of 70 loses nearly 40% of its capacity compared to one with a slenderness ratio of 24. This is a well-known phenomenon in column design, but the paper quantifies it specifically for multi-cavity polygonal CFST columns.

The eccentricity effect is even more pronounced. Increasing the eccentricity ratio from 0.2 to 1.0 reduces the capacity by more than half. This highlights the importance of accurate load eccentricity prediction in design.

Proposed Capacity Calculation Formulas

Based on the finite element results and referencing existing calculation methods, the authors developed formulas for hexagonal six-cavity and pentagonal four-cavity CFST columns under eccentric compression. These formulas account for the effects of slenderness ratio, eccentricity ratio, material strengths, and geometric parameters.

Engineering Practice Implications

Fabrication Challenges for Multi-Cavity Polygonal Columns

From a manufacturing perspective, multi-cavity polygonal columns present several challenges:

  1. Steel plate forming: The polygonal shape requires precise bending or forming of steel plates to achieve the required angles and dimensions. Tolerances must be tight to ensure proper fit-up of the internal partitions.
  2. Internal partition welding: The internal partitions that divide the column into chambers require welding from both sides, which is difficult in confined spaces. Weld quality is critical because the partitions transfer shear between the concrete chambers.
  3. Concrete filling: Each chamber must be filled separately, and the filling process must ensure complete compaction without voids. The presence of internal partitions makes it difficult to access all areas for vibration.
  4. Quality control: Non-destructive testing of the internal welds is challenging due to limited access. Ultrasonic testing from the outer surface may not be effective for detecting defects in internal partitions.

Lessons from the Parametric Study

The parametric study provides valuable guidance for design:

  1. Slenderness ratio control: For columns with high slenderness ratios, the capacity reduction is significant. Designers should consider using larger cross-sections or reducing the effective length to keep the slenderness ratio below about 40.
  2. Eccentricity management: Eccentric loading is extremely detrimental to capacity. Designers should carefully analyze load paths to minimize eccentricity, particularly for columns supporting large moments.
  3. Internal reinforcement: Adding a reinforcement cage inside the concrete chambers significantly improves ductility and post-peak capacity. This is particularly important for seismic design, where ductility is as important as strength.

A Caution from the Field

I have seen projects where multi-cavity columns were fabricated with inadequate attention to the internal partition welds. The result was that the partitions did not transfer shear effectively, and the column behaved more like separate single-cavity columns than a composite multi-cavity section. This reduced the capacity below the design value and required costly remediation.

Conclusion

This paper provides a comprehensive investigation of the eccentric compression behavior of multi-cavity polygonal CFST columns. The test results and finite element parametric study offer valuable data for design, and the proposed capacity formulas provide a practical tool for engineers. The findings emphasize the importance of controlling slenderness ratio and eccentricity, and highlight the benefits of internal reinforcement for ductility. For engineers involved in the design and construction of high-rise buildings with giant columns, this paper is an essential reference.