Selection of Calculation Models for UHV Transmission Line Steel Tube Towers
Literature Overview and Core Findings
This paper by Yang Jingbo, Han Junke, Li Maohua, Li Feng, and Yang Fengli from the China Electric Power Research Institute, published in Power System Technology in 2010, investigates the selection of calculation models for ultra-high voltage (UHV) transmission line steel tube towers. The study addresses a critical design issue: the accuracy of structural analysis models used for steel tube tower design.
The authors analyze a 1000kV Huainan-Shanghai UHV double-circuit steel tube tower, comparing three calculation models: the bar element model using a general tower design program, the beam-bar mixed element model using ANSYS finite element software, and the beam element model using ANSYS. The results show that the axial forces and dynamic characteristics of the main members are essentially consistent across all three models. However, the beam-bar mixed element model and the beam element model produce similar bending moments at the member ends, which are not captured by the bar element model.
From my perspective in the steel pipe industry, this is a highly relevant topic. Steel tube towers are widely used in transmission lines due to their superior structural efficiency and aesthetic appearance. The accurate calculation of member forces is critical for the safe and economical design of these towers. The choice of calculation model significantly affects the design results, and the use of an inappropriate model can lead to either unsafe or overly conservative designs.
Technical Interpretation and Engineering Practice
Calculation Models and Their Assumptions
The three calculation models considered in this study represent different levels of structural idealization:
| Model Type | Element Type | Assumptions | Advantages | Limitations |
|---|---|---|---|---|
| Bar element model | Truss element | Members carry only axial forces; no bending moments | Simple, computationally efficient | Ignores member end moments |
| Beam-bar mixed element model | Beam and bar elements | Main members modeled as beams; secondary members as bars | Captures member end moments | More complex, computationally intensive |
| Beam element model | Beam element | All members modeled as beams | Captures member end moments | Most complex, computationally intensive |
The table illustrates the key differences between the three models. The bar element model is the simplest and most commonly used in tower design, but it ignores the bending moments at member ends. This can lead to inaccurate predictions of member forces, particularly for main members that are subjected to significant bending due to joint eccentricity or lateral loads.
Comparison of Results and Design Implications
The study's results show that the axial forces and dynamic characteristics of the main members are essentially consistent across all three models. However, the beam-bar mixed element model and the beam element model produce similar bending moments at the member ends, which are not captured by the bar element model. This suggests that the bar element model may underestimate the stresses in main members, potentially leading to unsafe designs.
The following table summarizes the key findings:
| Parameter | Bar Element Model | Beam-Bar Mixed Element Model | Beam Element Model |
|---|---|---|---|
| Main member axial force | Consistent | Consistent | Consistent |
| Main member end moment | Not captured | Captured | Captured |
| Dynamic characteristics | Consistent | Consistent | Consistent |
| Computational complexity | Low | Medium | High |
| Design conservatism | Potentially unconservative | Appropriate | Appropriate |
The table highlights the critical finding that the bar element model may be unconservative for main member design. The bending moments at member ends can be significant, particularly for main members with large slenderness ratios or where joint eccentricity is present. The beam-bar mixed element model offers a good balance between accuracy and computational efficiency, making it a recommended choice for UHV steel tube tower design.
Manufacturing and Fabrication Considerations
From a fabrication standpoint, the choice of calculation model affects the design of member connections and joint details. The bending moments at member ends influence the design of welded or bolted connections, including the size and number of bolts or the weld size and length. If the bar element model is used and the bending moments are not captured, the connections may be underdesigned, leading to premature failure.
In my experience with steel tube tower fabrication, the connection details are critical for the structural performance. The welded connections between the main members and the secondary members must be designed to transfer the actual forces, including any bending moments. The use of a more accurate calculation model, such as the beam-bar mixed element model, ensures that the connection design is based on realistic force distributions.
Key Questions and Reflections
The paper raises several important questions that warrant further investigation. First, the effect of joint flexibility on the member forces needs to be evaluated. The connections in steel tube towers are not perfectly rigid or perfectly pinned, and the actual flexibility may affect the force distribution. The beam-bar mixed element model assumes rigid connections, which may not accurately represent the actual behavior.
Second, the behavior of steel tube towers under extreme loading conditions, such as high winds or ice loads, needs to be investigated. The dynamic characteristics of the tower are important for predicting the response to wind-induced vibrations. The study's finding that the dynamic characteristics are consistent across all three models is reassuring, but the response under extreme loading may differ.
From my experience in delivering steel tube towers, I would emphasize the importance of considering the actual boundary conditions in the analysis. The tower base is typically fixed to a foundation, but the degree of fixity may vary depending on the foundation type and connection details. The use of a more accurate model, such as the beam-bar mixed element model, allows for a more realistic representation of the boundary conditions.
Study Insights and Practical Implications
This research provides a valuable contribution to the field of UHV transmission line steel tube tower design. The comparison of three calculation models provides clear guidance on the appropriate model selection for different design scenarios. From my perspective as an industry veteran, I would highlight the following practical implications:
- The bar element model is suitable for preliminary design and for members where bending moments are not significant. However, for main members and connections, the bending moments must be considered.
- The beam-bar mixed element model is recommended for the detailed design of UHV steel tube towers, as it provides a good balance between accuracy and computational efficiency.
- The connection design must be based on the actual force distribution, including any bending moments. The use of a more accurate calculation model ensures that the connections are adequately designed.
- The dynamic characteristics of the tower should be evaluated using a model that captures the actual stiffness and mass distribution.
In conclusion, this study provides valuable guidance on the selection of calculation models for UHV steel tube towers. The beam-bar mixed element model is recommended for detailed design, as it captures the bending moments at member ends while maintaining computational efficiency. The findings highlight the importance of considering member end moments in the design of main members and connections, which may be underestimated by the simpler bar element model. The lessons learned from this research will be valuable to engineers involved in the design and fabrication of UHV transmission line steel tube towers.
Zhuojin Pipe Fitting Co., Ltd