ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Literature Study Note: Design and Static Performance Analysis of Concrete-Filled Steel Tube Box Composite Ultra-High Piers

1. Overview of the Study

This paper by Wu Qingxiong et al. from Fuzhou University presents the design concept and static performance analysis of a concrete-filled steel tube (CFST) box composite ultra-high pier, using the Jinyang River Bridge as a case study. The bridge is a continuous rigid-frame bridge with an ultra-high pier, which presents significant design challenges due to the high slenderness ratio and the potential for instability.

The proposed pier design consists of an internal CFST lattice column as the main load-bearing structure, which also serves as the stiffening skeleton for the construction of the external reinforced concrete. The individual column limbs are encased in a thin layer of reinforced concrete to enhance the load capacity, and reinforced concrete webs connect the column limbs to participate in shear resistance. The study compares the static performance of this composite pier with that of a traditional reinforced concrete thin-walled hollow pier using the MIDAS Civil software.

2. Interpretation of Core Findings

The study's findings are significant for the design of ultra-high piers:

Finding Implication for Design
The CFST box composite ultra-high pier has a higher first-order elastic stability coefficient than the reinforced concrete thin-walled hollow pier, both at the maximum cantilever construction stage and at the completed bridge stage. The composite pier is more stable and less prone to buckling, which is a critical advantage for ultra-high piers.
By progressively increasing the steel pipe diameter and wall thickness from the top to the bottom of the pier, the stress in the steel pipe and the outer concrete can be kept constant along the pier height. This is an efficient design method that ensures uniform stress distribution and avoids over-designing the top of the pier.
The stress in the outer concrete of the composite pier is much lower than that in the reinforced concrete thin-walled hollow pier. This allows the use of a thinner layer of lower-strength concrete for the outer shell, which can reduce the self-weight of the pier and simplify the construction.

3. Integration with Engineering Practice

This study is directly relevant to the design and construction of ultra-high bridge piers. The findings have several practical implications:

  1. Design Philosophy: The design of the CFST box composite pier is based on a clear load-sharing principle. The internal CFST lattice column is the primary load-bearing element, while the outer concrete provides additional capacity and protection. The reinforced concrete webs provide shear resistance. This composite action allows for an efficient and lightweight design.
  2. Construction Sequence: The internal CFST lattice column serves as the stiffening skeleton during the construction of the outer concrete. This is a critical advantage, as it allows for the construction of the pier in a safe and efficient manner. The CFST column can be erected and used as a support for the formwork and the concrete placement.
  3. Material Selection: The study shows that the outer concrete can be of lower strength and thinner section. This can lead to significant cost savings and a reduction in the self-weight of the pier. The steel pipe for the internal column must be of high quality and have the required mechanical properties.
  4. Connection Details: The connection between the CFST column limbs and the outer concrete is critical for the composite action. The design must ensure that the shear forces are transferred effectively between the two components. This may require the use of shear studs or other mechanical connectors.

4. Key Questions and Reflections

This study raises several important questions that need to be addressed in future research:

  1. Dynamic Behavior: The study focuses on the static performance of the pier. The dynamic behavior under seismic loading is not addressed. For ultra-high piers in seismic regions, the dynamic response is a critical design consideration.
  2. Construction Stages: The study considers the maximum cantilever construction stage and the completed bridge stage. The behavior during other construction stages, such as the closure of the bridge, is not investigated.
  3. Effect of Imperfections: The study assumes perfect geometry and material properties. In practice, there will be imperfections in the construction, such as initial out-of-straightness and residual stresses in the steel tube. These imperfections can affect the stability of the pier.
  4. Long-term Behavior: The study is a short-term analysis. The long-term behavior of the pier, including the effects of concrete creep and shrinkage, is not considered. This is important for the serviceability of the bridge.

5. Study Insights and Implications

This paper provides a valuable design concept for ultra-high bridge piers. The key insights for engineers are:

For the steel pipe manufacturer, this study highlights the importance of the steel tube in the composite pier. The tube is the primary load-bearing element and must be of high quality with the required mechanical properties. The progressive increase in diameter and wall thickness requires careful planning and coordination between the manufacturer and the contractor to ensure that the correct pipe sections are delivered at the right time.

6. Reference Value and Outlook

This study has high reference value for the design of ultra-high bridge piers. The proposed design concept can be used as a basis for the design of similar structures.

The outlook for future research should include:

In conclusion, this paper is an important contribution to the field of bridge engineering. It presents a novel and efficient design concept for ultra-high piers and provides a clear analysis of its static performance. The lessons learned are directly applicable to my work in the steel pipe industry, and I will use them to better support our clients in the design and construction of these innovative structures.