ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Temperature Stress Behaviour of Axially Loaded Restrained Steel Tube Columns under Fire

Literature Overview and Why This Paper Matters

This paper by Qu Lijun et al. from the Chinese People's Armed Police Force Academy, published in Journal of Civil Engineering (2012, Vol. 45, No. 12), reports one of the most systematic experimental programmes I have seen on restrained steel columns under fire. The team built a dedicated test rig and ran 215 Q345 steel tube column specimens through constant-load continuous-heating tests, varying 13 restraint stiffness levels, 3 initial stress levels, and 6 slenderness ratios. That is a serious dataset, and the findings have direct consequences for how we design and fabricate steel tube columns for buildings where fire resistance is a governing criterion.

I have spent decades in the pipe business, and I can tell you that the steel tube used in structural columns is not the same animal as line pipe or process pipe. The chemistry may be similar, but the performance requirements are different. This paper forces us to think about the tube as a structural member under thermal-mechanical coupling, not just as a conduit for fluid. The restraint stiffness of the surrounding structure, the initial stress level from dead and live loads, and the slenderness of the column all interact in ways that simple code formulas do not capture.

Key Technical Findings and Interpretation

Temperature Stress Is the Dominant Effect

The paper demonstrates that temperature stress, meaning the additional axial force generated in a restrained column as it tries to expand but is held back by the surrounding structure, is the most significant action in fire conditions. It must be included in fire resistance design and assessment. The authors show that although temperature stress declines in the later stages of heating, the specimen has already failed by then. In practical terms, this means that if you design a column only for the load at ambient temperature and assume that fire simply reduces material strength, you are missing the real mechanism. The restraint-induced force can push the column into failure long before the material itself reaches its critical temperature.

Restraint Stiffness and Slenderness Effects

The test results show that higher restraint stiffness and larger slenderness both increase the temperature stress and lower the failure temperature. Conversely, lower restraint stiffness and smaller slenderness give the opposite trend. When restraint stiffness is high and slenderness is low, the temperature stress versus temperature rise curve exhibits a longer plastic plateau. This is a classic interaction between geometric nonlinearity and material nonlinearity. For the pipe fabricator, this means that the choice of tube diameter, wall thickness, and length must be reviewed against the restraint conditions of the actual structure, not just the nominal load.

Failure Modes: Instability versus Strength

The paper identifies two distinct failure modes. For columns with larger slenderness, failure is by instability, characterised by significant lateral residual deformation and relatively small axial deformation. For columns with smaller slenderness, failure is by strength, with the opposite deformation pattern. This is a fundamental distinction that affects how we interpret post-fire inspection results. If you see a column that has buckled sideways, the root cause may be a slenderness problem rather than a material strength problem. If you see a column that has crushed axially, the opposite is true.

Initial Stress Level Effects

At the beginning of heating, the temperature stress versus temperature rise curves for different initial stress levels are essentially coincident, with the same slope. Lower initial stress leads to higher temperature stress and a later separation from the initial coincident curve. This tells us that the pre-load on the column, which in practice comes from the dead load and the portion of live load present at the time of fire, sets the starting point but does not change the initial thermal response. The separation point marks the onset of significant yielding, and it occurs earlier when the initial stress is higher.

Four-Stage Behaviour

The paper describes the temperature stress versus temperature rise curve as having four stages: a linear relationship at low temperature rise, a nonlinear regime with decreasing growth rate, a plastic plateau where temperature stress remains constant, and finally a descending branch as the specimen fails. This four-stage description is a valuable conceptual model. It tells us that the column has a usable range, a warning range, and a failure range. For design purposes, we should aim to keep the column in the first two stages under the design fire scenario.

Engineering Practice Implications

Design and Fabrication Considerations

For the pipe manufacturer, this paper underscores the importance of controlling the mechanical properties of the tube, particularly the yield strength and the shape of the stress-strain curve at elevated temperatures. Q345 steel is widely used, but the actual yield strength can vary within the specified range. A column with a higher actual yield strength will behave differently from one at the lower end. The fabricator should therefore ensure that mill test certificates are traceable to the specific heat and that the yield strength used in fire design is conservative.

Welding and Connection Effects

The restraint stiffness at the column ends is not just a function of the column itself but also of the connections. A welded connection to a rigid beam or a heavy base plate will provide much higher restraint than a pinned connection. This paper shows that higher restraint is not necessarily beneficial. It increases the temperature stress and lowers the failure temperature. In practice, this means that a column with a rigid base connection may fail earlier in a fire than a column with a nominally pinned base, even though the pinned base has lower load capacity at ambient temperature. This is a counterintuitive result that many designers miss.

Post-Fire Assessment

For engineers assessing a building after a fire, this paper provides a framework for interpreting observed deformations. If a column shows lateral buckling, the assessment should focus on slenderness and restraint conditions. If a column shows axial crushing, the assessment should focus on material strength degradation. The distinction matters because the remedial measures are different. Lateral buckling may be corrected by adding lateral bracing or reducing the effective length. Axial crushing may require strengthening or replacement of the column.

Key Questions and Reflections

One question that this paper raises but does not fully answer is the effect of tube manufacturing method on fire performance. Seamless tube, ERW tube, and LSAW tube have different residual stress distributions and different weld seam properties. The residual stresses from cold forming or welding can interact with the thermal stresses in a fire, potentially causing premature local buckling or weld seam failure. This is a topic that deserves further research.

Another question is the effect of the tube wall thickness-to-diameter ratio. The paper uses Q345 steel tube columns, but the range of D/t ratios is not specified in the abstract. For thin-walled tubes, local buckling may occur before global instability or strength failure. This is a critical issue for large-diameter thin-walled tubes, which are common in architectural applications where weight is a concern.

Study Insights and Practical Takeaways

This paper is a reminder that fire design is not just about material strength reduction factors. It is about the interaction between the member, the structure, and the thermal environment. The restraint stiffness is a structural property, not a material property. It depends on the entire framing system, the connections, and the foundation. The pipe manufacturer cannot control restraint stiffness, but the manufacturer can control the tube geometry, the material properties, and the weld quality. These are the parameters that determine whether the column behaves as a stable member or a buckling-prone member under fire.

For the fabricator, the practical takeaway is to ensure that the tube dimensions and material properties are within tight tolerances and that the weld quality is excellent. A tube with excessive out-of-roundness or a weld seam with a significant lack of fusion can initiate local buckling at a temperature well below the theoretical critical temperature. The cost of controlling these parameters is small compared to the cost of a failed column in a fire.

Reference Value and Outlook

This paper is a valuable reference for structural engineers, fire protection engineers, and pipe fabricators who supply steel tube columns for buildings. The experimental data on 215 specimens provides a solid basis for validating numerical models and developing simplified design formulas. The findings on restraint stiffness and slenderness effects are particularly important for high-rise buildings, where columns are often heavily restrained by the floor system and where slenderness varies significantly between lower and upper floors.

The future direction should be to extend the research to other steel grades, to tubes with different manufacturing methods, and to columns with realistic connection details. The interaction between fire and corrosion is also an important topic, particularly for columns in parking garages or industrial environments where de-icing salts or chemical agents may be present. The steel pipe industry should support this research, because it directly affects the performance of our products in service.

In conclusion, this paper is a wake-up call for the industry. We cannot assume that a steel tube column will behave the same way in a fire as it does at ambient temperature. The restraint, the slenderness, and the initial stress all matter. The pipe fabricator must understand these effects and work with the designer to ensure that the tube is specified, manufactured, and installed correctly. The lessons from this research are hard-won, and they are worth applying on every project where steel tube columns are used.