ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Square-Encased Circular CFST Components Under Lateral Impact: A Design and Fabrication Review

Overview of the Literature

This paper from the Journal of Civil Engineering presents the results of lateral impact tests on eight square-encased circular concrete-filled steel tube (CFST) components with a large hollow ratio. The authors used a drop hammer to apply the impact load, and they studied the effects of drop height, boundary constraints, and axial load ratio on the dynamic response. The failure mode is a significant local indentation with minimal overall deformation, which is a characteristic of a component with a large hollow ratio. The paper provides valuable data for the design of protective structures, such as bridge piers and building columns that may be subjected to vehicle impact.

Key Technical Points and Interpretation

The hollow ratio of 0.69 is the key parameter. This means the inner circular tube has a diameter that is 69% of the outer square tube, leaving a large annular space that is filled with concrete. Under lateral impact, the component absorbs energy through local indentation of the outer tube and crushing of the concrete. The overall deformation is small, which is a desirable characteristic for a protective structure—it can absorb a significant impact without losing its overall shape.

The study found that increasing the drop height increases the local indentation, the residual deflection at mid-span, and the impact duration, all in a linear fashion. This is a simple and useful relationship for design. The boundary constraints have a significant effect on the residual deflection, the plateau value of the impact force, and the impact duration. A component with fixed ends behaves differently from one with simply supported ends, and the design must account for this.

The axial load ratio is the most important factor. As the axial load ratio increases, the plateau of the impact force-time curve shortens and eventually disappears, the mid-span deflection velocity increases, and the impact process accelerates. This is a critical finding: a component under high axial load is more vulnerable to lateral impact because the axial load reduces the component's ability to deform plastically.

Parameter Effect on Dynamic Response Design Implication
Drop height Linear increase in indentation, residual deflection, and duration Use a linear relationship for impact energy
Boundary constraints Significant effect on residual deflection and impact force Model the correct boundary conditions
Axial load ratio Shortens the force plateau, accelerates the impact process Limit axial load ratio for impact-resistant design
Hollow ratio (0.69) Local indentation dominates, overall deformation is small Suitable for protective structures

Integration with Manufacturing and Delivery Practice

The fabrication of a square-encased circular CFST component is a two-stage process. The inner circular tube is fabricated first, then the outer square tube is formed around it, and the annular space is filled with concrete. The quality of the inner tube is critical because it provides the core stiffness. If the inner tube has a weld defect or a dent, it will be a weak point under impact.

The concrete filling is even more critical. The annular space is narrow, and it is difficult to fill completely. On the shop floor, we have seen components where the concrete did not reach the top, leaving a void that caused a premature failure under impact. The filling must be done from the bottom up, with a vent at the top, and the concrete must be vibrated to ensure complete consolidation.

The outer square tube is typically formed from a flat plate by bending and welding. The weld seam is a potential weak point. A full penetration weld is required, and the weld should be inspected by UT or PAUT. The corner of the square tube is also a stress concentration, and the impact load will often cause the indentation to start at the corner.

Lessons Learned and Summary

The square-encased circular CFST component with a large hollow ratio is an effective protective structure. It absorbs impact energy through local indentation and concrete crushing, while maintaining overall stability. The design must account for the axial load ratio, which is the most critical parameter. A high axial load ratio reduces the component's ability to absorb impact energy, and this should be a design limit.

For the fabricator, the lesson is to treat the concrete filling as a critical process. A void in the annular space is a hidden defect that will cause premature failure under impact. The inner tube must be free of defects, and the weld seam on the outer tube must be full penetration. The component is a composite, and its performance depends on the quality of both the steel and the concrete.